User's Manual

ManualsBrandsVIA Technologies ManualsElectronicsDoor Station

Quick Guide

SHP-D01

Door Station

2. SHP-D01 Front/Side panel

Product Information

Product InformationProduct Information

Product Information

Model:

Model: Model:

Model: SHP-D01

Package Lists:

Package Lists:Package Lists:

Package Lists:

-SHP-D01 door station X 1

-RS485 cable X 1

-DIO cable X 1

-M4 * 30mm screw X 3

-8mm brass pipe + spring X 1

-Quick Guide X 1

5. SHP-D01 Installation steps

1. Put brass pipe + spring on the embedded box,

as indicated in the ○

2. Distance between bottom of the embedded

box and the ground is 132 cm.

Front panel and size

Side panel

and size

○

132 cm

RJ45 port

RS485 port

3. SHP-D01 back panel

DC-In power

Adjustment of

camera

switch

ring

DI1 reserved

reserved

DI2 reserved

reserved

DO1 Open the

door

Connect NO

Relay default status

is On

DO2 reserved

reserved

DO3 reserved

reserved

DIO pin definition

DIO definition

4. Relay connection (use

OMRON MY2-J Relay as an

example)

Green LED Red LED

Green LED ON: normal operation

Green LED flash: booting

Red LED ON: ○

Enable home or

egress security

○

Anti-dismantle has been triggered

○

Security has been triggered

○

Force status has been triggered

DIO port

Note

NoteNote

Note:

1. This diagram is for reference only, please

see DIO definition for actual connection.

2. Max. value of motion for DIO is 400mA.

3. DI can externally connect to spring switch

and NC of the dry contact. If the same DI

needs to use 2 or more spring switches,

connect by series.

4. DI that externally connects to switch (eg,

doorbell, emergency pressure deduction) and

gas detector, can connect to NO. To use 2 or

more devices, connect by series.

5. If DI2 of the door station is not connected

to door detector, please short DI2 and

DI2GND.

6. When DO connects to electric lock, power

supply locks, interruption of power supply

unlocks.

7. When DO connects to alarm, alarm

connects to Relay NO, motion on Relay will

enable the alarm.

1. SHP-D01 Specifications

Item Description

Camera 500 megapixel wide-

angle color lens

Brightness exposure LED

Reader (RFID) Support 13.56MHz,

ISO14443A standard

Network Interface RJ-45

Network transmis-

sion rate

10/100M

Power DC-12V

Power consump-

tion

<10W

Operating tem-

perature

0~40°

Humidity 0~95%, non-condensing

Alarm

speaker

Dry Contact

switch

black

brow

Red

Orange

Yellow

Green

Bleu

Purple

Grey

White

Red

black

brow

Purple

Summary of content (2 pages)

PAGE 1
2. SHP-D01 Front/Side panel 1. SHP-D01 Specifications Quick Guide SHP-D01 Item Description Camera 500 megapixel wideangle color lens Front panel and size mm DC-In power Brightness exposure LED Door Station Reader (RFID) Product Information 3. SHP-D01 back panel Side panel and size Support 13.
PAGE 2
3. Remove two M2 screws from the bottom of the plaque. Take off the plate in order to separate the plaque and the main part. 4. Use M4 screw to fix the main part. 5. Distance between bottom of the door station and the ground is 131 cm. Please consider the thickness of the tile or marble. 6. Put the front plaque and plate back. Fix the bottom with two M2 screws. 6. SHP-D01 installation diagram RFID area (within Assistant Exposure light rectangular area ) lens 179.6 cm Angle of view 60° 145 cm 69.