Technical Support and E-Warranty Certificate www.vevor.com/support LABELING MACHINE USER MANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
LABELING MACHINE MODEL:LD-10 NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
1. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. 2. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. GENERAL SAFETY RULES Important reminder 1.Before use, please carefully read the product manual and ensure that you understand and comply with all safety warnings and usage precautions. 2. Do not use this product for other non-designated purposes to avoid unexpected risks. 3.
acid or alkali solutions, etc 2. Do not disassemble the product or replace components on your own. If you encounter any malfunctions, please contact the after-sales service center. Disclaimers We attach great importance to the safety and quality of our products, but cannot assume responsibility for safety accidents caused by improper use or operation.
MODEL AND PARAMETERS Model LD-10 Label Width 15-55mm Label Length 20-60mm Label Roll I.D 20mm< I.D<120mm Label Roll O.
STRUCTURE DIAGRAM 1 3 4 1. Grab Handle 2. Label Cover Switch 2 3. Label Baffle COMPONENTS Parts Model LD-10 User Manual ×1 Label Roll ×1 -5- 4.
OPERATING INSTRUCTIONS 1. Turn the label baffle counterclockwise and remove it as shown. 2.Load the label roll and pull out the label to install it as shown. And then install label baffle and tighten it clockwise. 3.Flip the label cover switch to open the label cover(A).Pull out the label and install it, closing the label cover as shown. The installed labels should be aligned smoothly from beginning to end. Otherwise, the label will be easily torn.
A 4.Product assembly completed.
The operating instructions 1.Align flat items, move the labeling machine while pressing the labeling machine as shown. 2. label setting 1)Adjust knob position according to label size 2)Loosen the knob counterclockwise and adjust the position of the knob to get the extension length of the label.After adjustment, lock the knob clockwise. 3)Figure 1 corresponds to the least extension of the label, and Figure 2 corresponds to the longest extension of the label.
MAINTENANCE 1. Inspect periodically all parts and accessories and replace them if damaged. 2. Have damaged parts replaced by an authorized service center. 3.Please use a soft, clean cloth when cleaning the machine.Do not flush the machine with water or liquid. 4.Please store the product in a dry and ventilated place. TROUBLESHOOTING Problem Possible Cause The label roll Possible Solution is not properly installed. The label didn't come out The internal spring of the handle is stuck.
Address:Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd, Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 REP SHUNSHUN GmbH Römeräcker 9 Z2021, 76351 Linkenheim-Hochstetten, Germany UK REP Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom EC Made In China - 10 -
Technical Support and E-Warranty Certificate www.vevor.