Technical Support and E-Warranty Certificate www.vevor.com/support ELECTRIC CERAMIC HOB USER MANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
Specification of Ceramic Hob MODEL: LT2V-39 NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
CONTENTS ·Model and parameters……………………………….…..……..…….........2 ·Important safety instructions……………………………….…..……..……3 ·Installation ….........................................................................................4 ·Connection to power supply………………………………..…….….…….6 ·Diagram of the radiant hob………………………………………...….……6 ·Instruction for use……………………………………………………….…..6 ·Safety …………………………………………………………………………8 ·Use of containers ……………………………………………….……..……9 ·Cleaning and maintenance …………………….………….…….….
IMPORTANT SAFETY INSTRUCTIONS Read all instructions carefully before using this cooktop. Using kitchen appliances, basic safety precautions must be followed, including the following: •This appliance must be properly installed and grounded by a qualified technician. Only connect to a properly grounded outlet. See electric preparation and connection instructions in the Installation Instructions.
range-top service due to the sudden change in temperature, which may result in breakage. •Do not soak removable heating elements. Heating elements should never be immersed in water. •Do not cook on a broken cooktop. Contact a qualified technician immediately. •Clean cooktop with caution. Be careful to avoid steam burns if a wet sponge or cloth is used to wipe spills on a hot cooking area. Some cleaners can produce noxious fumes if applied to a hot surface. SAVE THESE INSTRUCTIONS INSTALLATION 1.
For safety the gap between the hob and any cupboard above it should be at least 760mm. WARNING (1). The Radiant cooktop must be installed by a properly qualified person We have our own qualified installers Never try to install the appliance yourself. (2).The Radiant cooktop must not be installed above refrigerators freezers, dishwashers or tumble dryers. (3).The wall and the area above the cooktop should be able to withstand heat.
an after sales technician using the proper tools so as to avoid any accidents. The installer must ensure that the correct electrical connection has been made and that it complies with safety regulations The cable must not be bent or compressed The cable must be checked regularly and only replaced by a properly qualified person. Electric ceramic stove failure: No heating for 2 minutes after the gear is selected, an "E4" fault will be displayed. Customer Service Email: CustomerService@vevor.
Power Press the button for the required cooking zone. You can slide the to change the power levels of the relevant cooking zone.The operation of zones is the same. up to max. 1000 W up to max. 800 W Residual heat indicator When the hob has been operating for some time, there will be some residual heat. The residual heat indicator warns for each cooking zone separately with "H" symbol. Timer After you have selected the cooking zone, please press .
cancelled. Or you can cancel the two zones timer together by pressing for three seconds. Key Lock (Childlock) To ensure the safety of children, the ceramic hob is fitted with an interlock device. To lock: hold down the “Inter lock” key for 3 seconds; the hob then goes into “Interlock” mode, the timer shows “L0” and the rest of the keys are disabled. To unlock hold down the lock key for 3 seconds and the hob will return to normal working.
AutomaticThe hob will automatically switch off when you did not set cooking time, forgot to switch off the hob, and did not operate the hob for two hours. USE OF CONTAINERS Most stainless steel, enamel, iron, STAINLESS STEEL ENAMEL ceramic and copper pans can be CERAMIC used on radiant cooktops. COPPER Aluminum pans are not recommended as they may stain the surface, unless they have stainless steel encapsulated bottoms. Hotplates should not be switched on without a pan on top.
Avoid dragging pans over the radiant glass surface, as it may get scratched. Always lift the pan. Never use tin foil or plastic containers. They may melt and fuse permanently with the radiant glass surface. CLEANING IMPORTANT: If the radiant glass surface breaks or you notice cracks in it, disconnect the equipment. Call your Repair Service Technician. Clean the radiant glass surface frequently, when it is cool. Never use abrasive products or pads. Clean with a damp cloth and soapy water.
accidentally burnt on the cooktop, remove at once with the scraper while still hot. Otherwise it may leave a permanent mark. Do not use the cooktop as a work surface. Be particularly careful with dirt or dust from vegetables, cleaning powders, etc. which may scratch the surface when pans are slid over it.
Support and E-Warranty Certificate https://www.vevor.