Thanks for choosing our product. In order to safeguard your rights and interests, please carefully read this instruction before you use the product.
Table of Contents 1. Usage and feature …………………..…………………（1） 2. Security precautions…..….……………………………（1） 3. Product structure diagram…..…………………………（1） 4. Installation……..………………………………………（2） 5. Operating instructions ….…………………………. …….（2） 6. Ice cream making method ….………………………….（3） 7. Electric principle diagram …………………………….（3） 8. Common errors and their solutions…..…………….……（4） 9.
1.Usage and feature Hard ice cream machine is mainly used for making hard ice cream, the biggest feature of this machine is small and exquisite, fashionable appearance, simple operation, easy to install and use, if equipped with a small refrigerator, it can become small factory for production of box ice cream. It is widely applicable to stalls, workshops, canteens and restaurants, hotels and bars.
. Operating instructions a) The “SET” key In the stop state, press the “SET” key, when the display window number flashes, continue to press the “SET” key to set the ice cream making time (10 to 35 minutes cycle), no operation for 5 seconds, the machine will automatically exit and save the time. b) The “AUTO” key In the stop state, press the “AUTO” key, the machine enters the automatic mode, the auto indicator light is on, the display window displays the countdown, and the stirring motor starts to work.
6.Ice cream making method a) Put the ice cream powder into a clean container, add 40℃ water, (Generally 1 kilogram of ice cream powder should be mixed with 2.5-3 kilograms of purified water.) If necessary, milk, sugar, flavor, etc., can be added appropriately, then stir the mix evenly. b) Turn on the power, put the ice cream mix into the feeder, so that it gradually into the mix cylinder, pay attention that the mix should not exceed the max line.
8.Common errors and their solutions Errors The machine cannot start. Automatic shutdown frequently There is noise and vibration Possible causes Solutions 1. Whether the power supply voltage is normal. 2. Whether the power is connected or the fuse is blown. 1. Adjust the voltage. 3. Whether the machine is restarted after three minutes of its turn off. 3. Wait three minutes to restart it after its turn off. 1. Whether the power supply voltage is normal. 1. Adjust the voltage. 2.
