User's Guide

PWR BUTTON
MIC_IN
TYPE-C HDMI
SIM JAE DCIN
LAN
RESET
WIFIWIFI
LOCK
USB2.0
USB3.0USB3.1
PWR_LED
HDD_LED
LINE_OUT
Security Tips
For using computer safely and effectively, please read the following carefully
before using:
• To avoid electric shock or product damage, each time you connect (not
Plug-and-play) devices, please turn off the AC power.
• Avoid using this product under temperature is too high or too low (Required
temperature is as following: Storage temperature: -20~70 Celsius; Operating
temperature: -5~45 Celsius; humidity: 10%~95%).
• Do not use a damp cloth to clean your computer and prevent liquid
dropping into the computer causing burns.
• In order to avoid frequently switching the machine to cause unnecessary
damage to the product, after shutting down, you should wait at least 30
seconds for power-on again.
• To prevent product damage and malfunction, avoid strong shock and
vibration to the product.
Interface Instructions
(Please refer to the "
External View
" above)
S640 Series
Simple User's Guide Rev 1.0
Contents
External View
• MIC_IN: This jack is used to connect an external microphone
• LINE_OUT: This jack is used to connect to the front left and right channel speakers of the audio system
• HDMI2.0: High-defin tion multimedia display interface, backwards compatibility HDMI1.4
• USB2.0: USB 2.0 connectors, backwards compatibility USB 1.1
• USB3.0: USB 3.0 connector, backwards compatibility USB 2.0/1.1
• LAN: RJ-45 Ethernet network connector
• PWR BUTTON: Pressing the power button, the machine will turn on
• PWR_LED: Power indicator light
• HDD_LED: HDD indicator light
• RESET: Reset button
• WIFI: WiFi antenna interface
• USB3.1 Type-C: Type-C connector
• USB3.1 Gen2 Type-A: USB 3.1 connector, backwards compatibility USB 3.0/2.0
• LOCK: LOCK button
• SIM: SIM card slot
• JAE: 80 PIN Extension Port
• DCIN: DC Power interface
BIOS Common Function
The following scenario you need to run the BIOS Setup program:
a. The System self-test error message appears on the screen, and enter the BIOS Setup;
b. Based on customer characteristics you want to change the factory default settings.
Describes the features common to sections below for BIOS only.
Note: since the Board's BIOS version is continually upgraded so in this manual for a description of BIOS
is for informational purposes only, we do not guarantee that this guide related content and consistency of
your information.
Enter the BIOS Setup program
Please open the computer, post pictures you can see this information:
At this point, press the (DEL) key to enter the BIOS Setup program, if you respond to the prompt
before disappearing, and you still want to enter the program, turn off the computer and then restart the
system open, or press (Crtl) + (Alt) + (Del) key to reboot.
Start programs shortcut settings menu
Turn the power on or reboot the system, post the picture you can see the following information:
Press the "F11" key will pop up menus as shown in the figu e below, directly press the up and down
arrow keys to their provisional designation needed to start the device, without the need to enter the BIOS
Setup.
Note: This illustration is for reference only, which may be defferent from the material object.
The defin tion of all the jumpers and sockets which are marked in the above picture, please refer to
the following "Interface Instructions" part.
1. Package Checklist
2. Product Configu ation
3. Security Tips
4. External View
5. Interface Instructions
6. BIOS Common Function
Disclaimer
The intellectual property of this
guide belongs to our company.
The ownership of all of the
products, including accessories
and software etc. belong to our
company. No one is permitted
to copy, change, or translate
without our written permission.
We compiled this guide based
on our careful attitude, but we
can not guarantee the accuracy
of the contents. This guide is
purely technical documentation,
without any hint or other
meanings, and we won't
commit users' misunderstanding
of the typesetting error.
Our products are in continuous
improvement and updating,
Therefore, we retain the right
that we won't give notice to the
users in future.
All of the trademark in this
guide belong to their own
registered company. All of
the products name is only for
identification, its title belongs
to its manufacturer or brand
owner.
Ver: 1.0
Date: July. 2020
P/N: Y5PF-A61866-00
Thank you for supporting
environmental protection and
energy saving!
Processor - Intel® Whiskey Lake-U, TDP 15W
Memory - 2 x SO-DIMM DDR4,Max. 32GB
Storage
- 1 x M.2 KEY M 2280 SATA SSD(SATA/NVME)
- 1 x M.2 KEY B 2242 SSD
Graphics - Intel® HD Graphics 6series
Network - Intel Gigabit Ethernet
Audio - Realtek ALC662 HD Audio IC
Dispaly Connectors - 1 x HDMI 2.0
WIFI/BT - 1 x M.2 2230 WIFI/BT Module
3/4G - 1 x SIM card
USB Connectors
- 2 x USB3.1 Gen2 Type-A
- 1 x USB3.0 Type-A
- 1 x USB2.0 Type-A
- 1 x USB3.1 Type-C (CC)
JAE 80-pin
- 1 x HDMI2.0 out
- 3 x USB2.0
- 1 x USB3.0
- 1 x UART TTL
Power input - 12-19V DC IN
Dimensions - 119(L) x 180(W) x 30(H) mm
Operating systems - Windows 10, Linux(Optional)
Please select boot device:
SATA: PM-Hitachi HTS3543216L9A300
USB: Generic-Multi-Card
Enter Setup
↑
and
↓
to move selection
ENTER to select boot device
ESC to boot using defaults
Press <DEL> to enter Setup,<F11>to popup menu
Press <DEL> to enter Setup,<F11>to popup menu
Package Checklist
Thank you for choosing our products. Before using your product, please
make sure your packaging is complete, if there have been damaged or you
find a y shortage, please contact your agency as soon as possible.
□
The Machine x 1
□
Simple User's Guide x 1
□
WiFi antennas x 2
□
Driver CD x 1 (Optional)
Product Configu ation
Rear IO
Y5 PF-A61866-00
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that
can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of
flammable liquid or gas
Frequency bands and Maximum output power for EU:
5G Wi-Fi:5150~5825MHz @19.80dBm
BT:2402~2480MHz @9.12dBm
2.4G Wi-Fi:2412-2472MHz @19.96dBm