Instructions / Assembly

ManualsBrandsVersaTex ManualsFlooringDiamond Plate 18 in. W x 18 in. L Gray Rubber Interlocking Modular Flooring

1. Ensure the floor surface is smooth, level, dry, and clean. Patch cracks, gapped seams, or

other damage (A).

2. Measure and mark the center of the room as the installation starting point (B).

3. Align the tiles and use a rubber mallet to pound tabs together. Lay the tiles from the center

point of the room in both directions toward the wall to form a cross (C).

4. Fill in each of the four quadrants by connecting full rows or columns to assure the

installation remains squared (D).

5. Cut perimeter tiles to allow a 1/4 - 1/2 inch gap between the tile edge and the wall.

Installation Instructions

Helpful Tips

∙

Each 18"x18" tile covers 2.25 square feet. To find how many tiles

your project requires, divide the total square footage of your space

by 2.25 and round up.

∙

A grid is imprinted on the back of each tile. Use these straight

lines for uniform measurement and cutting guides as needed.

∙

Tiles are made of a dense recycled rubber. To cut tiles, use

heavy duty snips, a sharp blade, or your preferred cutting tool.

Always use appropriate safety precautions when cutting and

installing tile. Wear protective eyewear and cutting gloves.

∙

Create a pattern using heavy paper or cardboard for irregular

shapes (i.e. door jambs). Trace the pattern onto the tile and cut.

∙

Due to recycled content, slight color variations may occur.

Cleaning & Maintenance

∙

Sweep grass and debris with a broom, or for heavily soiled

areas use a mop and mild detergent. Allow floor to dry

thoroughly before walking on tiles.

∙

In some heavy traffic instances, tiles may shift or tabs may

raise slightly. Simply step on the tab or use a rubber mallet to

pound the tab back into place.

Tools Required

∙

Broom

∙

Tape measure

∙

Rubber mallet

∙

Sharp blade

Ideal for garages, home

gyms, workshops, or

basements

Interlocking Floor Tiles

Modular Flooring

18" x 18" Tiles

VersaTex interlocking tiles have a

residential 1-year limited warranty

against failure due to manufacturing

defects. Warranty is limited to

replacement of the defective tiles only.

For more information or installation

inspiration, visit www.dimexcorp.com

Made in the USA by

11N-Mod.Gen 7.20