Cloud Services Gateway 700 Series 20.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 Table of Contents 1 At a Glance...........................................................................................................5 1.1 CSG700 Appliance Models ....................................................................................................... 5 1.2 Chassis Views............................................................................................................................ 5 2 Components and Specifications ...........
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 3.5 Connect a CSG700 Series Appliance ..................................................................................... 20 3.5.1 Step 1: Connect Earth Ground to a CSG700 Series Appliance ............................................................................21 3.5.2 Step 2: Connect AC Power to a CSG700 Series Appliance...................................................................................21 3.5.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 These articles provide an overview of the Cloud Service Gateway (CSG) 700 series appliances, including chassis specifications and components; general safety standards; and instructions for installing, connecting, and replacing an appliance. At a Glance (see page 5) Components and Specifications (see page 7) Plan and Install1 Return Hardware (see page 22) 1 https://docs.versa-networks.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 1 At a Glance The Versa Cloud Services Gateway (CSG) 700 series appliances deliver highly secure site-to-site data connectivity to 0* )) +! *"!&2*0&7"! 20&+"00"0 +! 1, %,*" ,##& "0 %"0" --)& + "0 -/,3&!" 1%" #,)),4&+$ #" 12/"0ï Unified board design that supports different CPUs and memory sizes Up to 10 Ethernet ports including: ,2/ 2&)1&+ } &$ &1 -"/ 0" ,+! ¡ ¢ 1%"/+"1 ,3"/ ,--"/ ¡ , ¢ -,/10ï Two 1-GB EoC or SFP ports, available through sep
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 reset buttons and various connectors and ports. This is the side that is visible when you mount the appliance in a 19-inch rack.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 2 Components and Specifications A CSG700 series appliance chassis is made of aluminum for optimal heat dissipation. Table 1 lists the specifications for a CSG700 series chassis. Table 1: CSG700 Series Chassis Specifications Item Specification Services and Slot Density RJ-45 ports 10/100/1000 Mbps 4+2 SFP Ethernet ports 2 External USB ports (USB 2.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 Item Specification Chassis width 8.75" (22 cm) Chassis depth 13.25" (33.6 cm) Rack height 1 RU Chassis weight 5.84 lb (2.65 kg) Package Specifications Package height 7" (17.78 cm) Package width 16.7" (42.4 cm) Package depth 12" (30.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 2.1 Front and Rear Panel Components This article describes the front and rear panel components of a CSG700 series appliance. For the exact location of these components on the appliance, see At a Glance (see page 5). 2.1.1 Front Panel The front panel of a CSG700 series appliance has two status LEDs and two SIM card slots. 2.1.1.1 LEDs Table 1 lists the LEDs, their colors and states, and the status they indicate.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 2.1.2.1 LEDs The rear panel of a CSG700 series appliance has six LEDs located in two rows. Table 2 lists the LEDs, their color and states, and the status they indicate. Table 2: Rear Panel LEDs in a CSG700 Series Appliance LED Color Status Power Green Off: Appliance is not powered on. Green: Appliance is powered on. Status Green, Red Off: Appliance hardware is up but there is a problem with the software. Solid green: Appliance is up and running.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 2.1.2.3 Reset Button The Reset button on the rear panel of a CSG700 series appliance resets the appliance. The reset functionality depends on the number of time you press it, as described in Table 3. The Reset button is recessed so that it is not accidentally pressed while the appliance is operational. To press the Reset button, use a sharp narrow tool. Each time you press the Reset button, you hear a buzzer sound.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 Figure 2 shows the four RJ-45 connectors/SFP slots for the 1-GB EoC/SFP combination port. Figure 2: RJ-45 Connectors or SFP Slots for 1-GB EoC/SFP Combination Port 2.3 Interface Numbering Figure 1 shows the mapping of the Ethernet ports to Virtual Network Interface (VNI) numbering. Figure 3: Port-to-VNI Mapping 2.4 Power Supply and Airflow This article describes the AC power supply, AC power cord specifications, and airflow requirements for CSG700 appliances.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 Table 1: CSG700 Series Appliance AC Power Supply Specifications Item Specification AC input voltage }||~| ,)10 AC input line frequency || 7 Typical power consumption with PoE disabled 35 Watts Typical power consumption with PoE enabled 60 Watts 2.4.2 Airflow Requirements The CSG700 series appliance is made of aluminum for optimal heat dissipation. The appliance has no fans, to minimize noise and to maximize the life of the appliance.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 3 Planning and Installation This article provides general safety standards and warnings regarding to installing or connecting a CSG 700 series appliances. 3.1 General Safety Guidelines Caution: Before installing or removing a CSG700 series appliance, ensure that the appliance chassis is electrically connected to ground. When you are installing or removing an appliance, ensure that you wear an ESD grounding wrist strap.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 3.3 Prepare the Site for Installation To prepare your site for installing a CSG700 series appliance, follow the guidelines and requirements listed in this article. 3.3.1 Site Preparation Guidelines Install the appliance in an enclosed and secure environment, and allow only authorized personnel to access the device. Keep the area around the appliance free from dust and conductive material.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 When planning your site for installing a CSG700 series appliance in a 19-inch rack, allow a minimum of 0.5 RU space above the appliance to allow hot air to flow out of the appliance. However, itt is recommended that you allow 1 RU space above the appliance for cooling. When placing a CSG700 series appliance on a desk, ensure that the vents on the top of the unit are never blocked, to allow hot air to flow out of the appliance.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 Note: It is recommended that you save the shipping carton and packing material when unpacking the appliance, in case you need to later move the appliance or return it. See Return Hardware2. 3.4.2 Packing List for a CSG700 Series Appliance The cardboard carton in which a CSG700 series appliance is shipped contains a packing list. Check the packing list against the parts that you receive in the shipping carton.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 Component Quantity Power cable 1 65 Watt PoE power adapter (included with PoE NIC module only) 1 Cat 6 cable 1 Cat 5e cable 1 LTE antenna (included with LTE module only) 2 for single LTE module 4 for dual LTE module WiFi antenna (included with WiFi module only) 2 GPS antenna 1 Rack-mounting ears 2 Screws for mounting ears 8 3.4.3 Mount a CSG700 Series Appliance in a Rack You can mount a CSG700 series appliance in a four-post 19-inch rack.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 4. Attach the two mounting ears to each side of the appliance chassis using the eight mounting ear screws that /" 0%&--"! 4&1% 1%" --)& + " 0" #,2/ 0 /"40 1, 11 % " % *,2+1&+$ " /ï &$2/" 11 % 1%" ,2+1&+$ /0 1, || "/&"0 --)& + "ï 5. Grasp both sides of the appliance chassis, making sure that the front of the chassis is facing you. 6. Stand in front of the rack and lift the chassis.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 7. Have the second person secure the mounting ears to the front of the rack using the rack-mount screws that /" 0%&--"! 4&1% 1%" --)& + " +0"/1 +! 1%"+ 1&$%1"+ 1%" 0 /"40ï Figure 5: Secure the Mounting Ears to the Rack 3.5 Connect a CSG700 Series Appliance This article describes how to connect a CSG700 series appliance to an AC power source and to a management console.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 3.5.1 Step 1: Connect Earth Ground to a CSG700 Series Appliance To ensure proper operation of a CSG700 series appliance and to meet safety and electromagnetic interference (EMI) requirements, you must connect the appliance to earth ground before you connect power to the appliance. If you use a three-prong power cable to connect power to a CSG700 series appliance, the power cable provide the ground connection.
~|} ïï ),2! "/3& "0 1"4 6 || "/&"0 4 Return Hardware This article describes how to return a CSG700 series appliance for return or replacement. 4.1 Locate the Model and Serial Number To return a CSG700 series appliance to Versa Networks, you need the model and serial number of the appliance. These numbers are printed on the shipping box and on the unit label located on the bottom of the appliance. 4.