Specifications

ManualsBrandsVersa Wireless ManualsElectronicsMotion Sensor

SPECIFICATIONS

Range: 12 meters in sensor-facing direction

12 meters at 45°angle from sensor-facing direction

Sensor Optical View Pattern (side view, in meters)

Optical Fields-of-View:

Long-range Mid-range Short-range

44 36 18

Sensor Optical View Pattern (top view, in meters)

Note: Specifications are subject to change without notice.

VWMSpod-012WPI Motion Sensor

Operation and Specifications

SUREN

www.surensystems.com

IR Sensor:

Dual elements

Power Supply:

CR123A 3V Battery

Power Supply Current:

22uA ( no alarm )

Tamper Switch:

Sealed dome-contact

Housing Material:

High-impact ABS

Dimensions:

73.5 x 60.5x 43.5mm ( H x W x D )

Approvals/qualification:

( Pending )

Pet immunity:10Kg

Events Detection:

HighBar™ false alarm rejection

processor

RF Immunity:

20 V/m, 10-1000 MHz;

10 V/m, 1-2 GHz

White Light Immunity:

6500 lux

Sensitivity:

Selectable: 2-event or 3-event

Operating Temperature

Range:

-40°C to +55° C

Accessories:

Mounting bracket:

MB-100

1.0

2.3

1.0

3.0

0 3 6 9

2.0

1.0

2.3

0 3 6 9 12

Short range

Long range

Middle range

One FOV ( field of view)

Long range

Middle range

The VWMSpod-012WPI is a professional state-of-the art motion sensor

engineered with the world's best components and materials.starting with a

SUREN HihgView lens and a top quality infrared detector, Next, a patented

modern DSP ASIC directly converts the infrared detector signal into digital

form, for best reliability and stability. Finally, the signal is evaluated by a

SUREN’s HighBar™ processor, for "best-in-class" false alarm rejection with

excellent intrude

r detection.

SENSOR INITIALIZATION

Following power-on, a VWMSpod-012WPI sensor is fully operational after a

one-minute warm-up.

WALK TEST

Note: The VWMSpod-012WPI should be tested once per year.

The LED should turn ON (for Alarm) after about two to four normal steps.

Each time the LED turns ON, wait for it to turn OFF. Then, wait 12 seconds

before continuing the walktest.When there is no motion in the monitored area,

the LED should remain OFF. It can be turned off after 5 mins, so it doesn’t

continue to e

at up power.

ALARM PROCESSING

Dual-element detector fields-of-view alternate between (+) and (-)polarity.

HighBar™ -qualified signal events are counted as "pulses"exclusively when

polarity alternates. Depending on sensitivitysetting, (+,-), (-,+), (+,-,+) or (-

,+,-) will cause an alarm.

PET IMMUNITY

The VWMSpod-012WPI is designed to allow the presence of pets (10kg

or lighter) without signaling an alarm. It includes a special microelement

l e n s a r r a y t h a t p r o d u c e s m

u c h s t r o n g e r o p t i c a l s i g n a l s f o r

h u mans t h a n for p e t s 10kg o r lig h t e r . Furt h e r m o r e , th e o p tical

sensitivity of each VWMSpod-012WPI is factory-calibrated to ensure

accurate discrimination between humans and pets.

No te : P et s come in many var ie ti es . Some pets (e sp ec ia ll y l ar ge r

ones with very short hair), even if lighter than 10kg, may produce

enough infrared radiation to cause alarms. VWMSpod-012WPI users

are strongly advised to test the sensor wi

th their own pets, in order

to verify that the VWMSpod-012WPI will not signal an alarm when their

pets are moving within its fields of view.

The diagram below shows the VWMSpod-012WPI's zones of greatest

human/pet discrimination. The VWMSpod-012WPI should be mounted so

that pets will occupy onlythe lighter-colored spaces.

SUREN Part no.: 0-ML00-3134-01-1 Rev.3

Limitations of Sensor Products: Sensor products and associated systems do not offer guaranteed anyone for any consequential or incidental damages for breach of this or any other warranty, express or

performance in ordinary situations or in special situations including but not limited to burglary, fire, or other implied, or upon any other basis of liability whatsoever, even if the loss or damage is caused by its own

emergencies. They may fail to function for diverse reasons, including (but not limited to): power failure, negligence or fault.

dead batteries, improper installation, coverag

e “blind spots”, coverage areas overlooked during

Seller does not represent that the products it sells may not be compromised or circumvented; that the

installation, component failure, or inadequate maintenance. Sensors and their associated systems should

products will prevent any personal injury or property loss by burglary, robbery, fire or otherwise; or that the

be checked weekly to ensure that all devices are working properly.

products will in all cases provide adequate war

ning or protection. Customer understands that a properly

SUREN LIMITED WARRANTY

installed and maintained alarm system may only reduce the risk of a burglary, robbery, or fire without

SUREN Systems, Ltd., of Fo Tan, Shatin, Hong Kong, warrants its products to be in conformance with its

warning, but it is not insurance or a guarantee that such will not occur or that there will be no personal injury

own plans and specifications and to be free from defects in materials and workmanshi

p under normal use

or property loss as a result.

and service for twelve months from the date of original purchase. Seller's obligation shall be limited to

Consequently, seller shall have no liability for any personal injury; property damage or other loss based on a

repairing or replacing, at its option, free of charge for materials or labor, any part which is proved not in

claim the product failed to give any warning. However, if seller is held liable, whether directly or indirectly,

compliance with Sell

er's specifications or proves defective in materials or workmanship under normal use

for any loss or damage arising under this limited warranty or otherwise, regardless of cause or origin,

and service. Seller shall have no obligation under this Limited Warranty or otherwise if the product is altered

seller's maximum liability shall not in any case exceed the purchase price of the product, which shall be the

or improperly repaired or serviced by anyone other than Seller. For warranty service,

return transportation

complete and exclusive remedy against seller.

prepaid, to SUREN Systems, Ltd., Unit 15, 12/F, Block B, Wah Sang Industrial Building, 14-18 Wong Chuk

Yeung Street, Fo Tan, Shatin, Hong Kong. Seller has no obligation to attend the buyer's location to retrieve

This warranty replaces any previous warranties and is the only warranty made by Seller on this product. No

the goods or make repairs on site.

increase or alteration, written or verbal, of the obligations of this Limited Warr

anty is authorized.

There are no warranties, expressed or implied, of merchantability, or fitness for a particular purpose or

otherwise, which extend beyond the description on the face hereof. In no case shall seller be liable to

U.S. Patent NO: 7,042,134 7,141,910 Patents issued and pending worldwide.

SPECIFICATIONS

Range: 12 meters in sensor-facing direction

12 meters at 45°angle from sensor-facing direction

Sensor Optical View Pattern (side view, in meters)

Optical Fields-of-View:

Long-range Mid-range Short-range

44 36 18

Sensor Optical View Pattern (top view, in meters)

Note: Specifications are subject to change without notice.

VWMSpod-012WPI Motion Sensor

Operation and Specifications

SUREN

www.surensystems.com

IR Sensor:

Dual elements

Power Supply:

CR123A 3V Battery

Power Supply Current:

22uA ( no alarm )

Tamper Switch:

Sealed dome-contact

Housing Material:

High-impact ABS

Dimensions:

73.5 x 60.5x 43.5mm ( H x W x D )

Approvals/qualification:

( Pending )

Pet immunity:10Kg

Events Detection:

HighBar™ false alarm rejection

processor

RF Immunity:

20 V/m, 10-1000 MHz;

10 V/m, 1-2 GHz

White Light Immunity:

6500 lux

Sensitivity:

Selectable: 2-event or 3-event

Operating Temperature

Range:

-40°C to +55° C

Accessories:

Mounting bracket:

MB-100

1.0

2.3

1.0

3.0

0 3 6 9

2.0

1.0

2.3

0 3 6 9 12

Short range

Long range

Middle range

One FOV ( field of view)

Long range

Middle range

The VWMSpod-012WPI is a professional state-of-the art motion sensor

engineered with the world's best components and materials.starting with a

SUREN HihgView lens and a top quality infrared detector, Next, a patented

modern DSP ASIC directly converts the infrared detector signal into digital

form, for best reliability and stability. Finally, the signal is evaluated by a

SUREN’s HighBar™ processor, for "best-in-class" false alarm rejection with

excellent intrude

r detection.

SENSOR INITIALIZATION

Following power-on, a VWMSpod-012WPI sensor is fully operational after a

one-minute warm-up.

WALK TEST

Note: The VWMSpod-012WPI should be tested once per year.

The LED should turn ON (for Alarm) after about two to four normal steps.

Each time the LED turns ON, wait for it to turn OFF. Then, wait 12 seconds

before continuing the walktest.When there is no motion in the monitored area,

the LED should remain OFF. It can be turned off after 5 mins, so it doesn’t

continue to e

at up power.

ALARM PROCESSING

Dual-element detector fields-of-view alternate between (+) and (-)polarity.

HighBar™ -qualified signal events are counted as "pulses"exclusively when

polarity alternates. Depending on sensitivitysetting, (+,-), (-,+), (+,-,+) or (-

,+,-) will cause an alarm.

PET IMMUNITY

The VWMSpod-012WPI is designed to allow the presence of pets (10kg

or lighter) without signaling an alarm. It includes a special microelement

l e n s a r r a y t h a t p r o d u c e s m

u c h s t r o n g e r o p t i c a l s i g n a l s f o r

h u mans t h a n for p e t s 10kg o r lig h t e r . Furt h e r m o r e , th e o p tical

sensitivity of each VWMSpod-012WPI is factory-calibrated to ensure

accurate discrimination between humans and pets.

No te : P et s come in many var ie ti es . Some pets (e sp ec ia ll y l ar ge r

ones with very short hair), even if lighter than 10kg, may produce

enough infrared radiation to cause alarms. VWMSpod-012WPI users

are strongly advised to test the sensor wi

th their own pets, in order

to verify that the VWMSpod-012WPI will not signal an alarm when their

pets are moving within its fields of view.

The diagram below shows the VWMSpod-012WPI's zones of greatest

human/pet discrimination. The VWMSpod-012WPI should be mounted so

that pets will occupy onlythe lighter-colored spaces.

SUREN Part no.: 0-ML00-3134-01-1 Rev.3

Limitations of Sensor Products: Sensor products and associated systems do not offer guaranteed anyone for any consequential or incidental damages for breach of this or any other warranty, express or

emergencies. They may fail to function for diverse reasons, including (but not limited to): power failure, negligence or fault.

dead batteries, improper installation, coverag

e “blind spots”, coverage areas overlooked during

Seller does not represent that the products it sells may not be compromised or circumvented; that the

installation, component failure, or inadequate maintenance. Sensors and their associated systems should

products will prevent any personal injury or property loss by burglary, robbery, fire or otherwise; or that the

be checked weekly to ensure that all devices are working properly.

products will in all cases provide adequate war

ning or protection. Customer understands that a properly

SUREN LIMITED WARRANTY

installed and maintained alarm system may only reduce the risk of a burglary, robbery, or fire without

SUREN Systems, Ltd., of Fo Tan, Shatin, Hong Kong, warrants its products to be in conformance with its

warning, but it is not insurance or a guarantee that such will not occur or that there will be no personal injury

own plans and specifications and to be free from defects in materials and workmanshi

p under normal use

or property loss as a result.

and service for twelve months from the date of original purchase. Seller's obligation shall be limited to

Consequently, seller shall have no liability for any personal injury; property damage or other loss based on a

repairing or replacing, at its option, free of charge for materials or labor, any part which is proved not in

claim the product failed to give any warning. However, if seller is held liable, whether directly or indirectly,

compliance with Sell

er's specifications or proves defective in materials or workmanship under normal use

for any loss or damage arising under this limited warranty or otherwise, regardless of cause or origin,

and service. Seller shall have no obligation under this Limited Warranty or otherwise if the product is altered

seller's maximum liability shall not in any case exceed the purchase price of the product, which shall be the

or improperly repaired or serviced by anyone other than Seller. For warranty service,

return transportation

complete and exclusive remedy against seller.

prepaid, to SUREN Systems, Ltd., Unit 15, 12/F, Block B, Wah Sang Industrial Building, 14-18 Wong Chuk

Yeung Street, Fo Tan, Shatin, Hong Kong. Seller has no obligation to attend the buyer's location to retrieve

This warranty replaces any previous warranties and is the only warranty made by Seller on this product. No

the goods or make repairs on site.

increase or alteration, written or verbal, of the obligations of this Limited Warr

anty is authorized.

There are no warranties, expressed or implied, of merchantability, or fitness for a particular purpose or

otherwise, which extend beyond the description on the face hereof. In no case shall seller be liable to

U.S. Patent NO: 7,042,134 7,141,910 Patents issued and pending worldwide.

The VW-DP Motion is a professional state-of-the art motion sensor engineered with the world's best components and materials starting with a Versa

HighView™ lens and a top quality infrared detector. Next, a patented modern DSP ASIC directly converts the infrared detector signal into digital form, for

best reliability and stability. Finally, the signal is evaluated by a HighBar™ processor, for "best-in-class" false alarm rejection with excellent intruder detection.

Sensor Initialization

Following power-on, a VW-DP Motion sensor is fully operational after a one-minute warm-up.

Walk Test

Note: The VW-DP Motion should be tested once per year. The LED should turn ON (for Alarm) after about two to four normal steps. Each time the LED

turns ON, wait for it to turn OFF. Then, wait 12 seconds before continuing the walktest. When there is no motion in the monitored area, the LED should

remain OFF. It can be turned o after 5 mins, so it doesn’t continue to eat up power.

Alarm Processing

Dual-element detector ﬁelds-of-view alternate between (+) and (-) polarity. HighBar™ - qualiﬁed signal events are counted as "pulses" exclusively when

polarity alternates. Depending on sensitivity setting, (+,-), (-,+), (+,-,+) or (-,+,-) will cause an alarm.

Pet Immunity

The VW-DP Motion is designed to allow the presence of pets (60 lbs or lighter) without signaling an alarm. It includes a special microelement lens array

that produces much stronger optical signals for humans than for pets 60 lbs or lighter. Furthermore, the optical sensitivity of each VW-DP Motion is

factory-calibrated to ensure accurate discrimination between humans and pets.

Note: Pets come in many varieties. Some pets (especially larger ones with very

short hair, even if lighter than 60 lbs) may produce enough infrared radiation to

cause alarms. VW-DP Motion users are strongly advised to test the sensor with

their own pets, in order to verify that the VW-DP MotionI will not signal an alarm

when their pets are moving within its ﬁelds of view.

This diagram shows the VW-DP Motion's zones of greatest human/pet

discrimination. The VW-DP Motion should be mounted so that pets will occupy

only the lighter-colored spaces.

Speciﬁcations

Range: 40 feet in sensor-facing direction , 40 feets at 45° angle from sensor-facing direction

Sensor Optical View Pattern (side view, in feet) Sensor Optical View Pattern: (top view, in feet)

Optical Fields-of-View: Long-range (44) Mid-range (36) Short-range (18)

Operation & Speciﬁcations

VW-DP Motion

Motion Sensor

SPECIFICATIONS

Range: 12 meters in sensor-facing direction

12 meters at 45°angle from sensor-facing direction

Sensor Optical View Pattern (side view, in meters)

Optical Fields-of-View:

Long-range Mid-range Short-range

44 36 18

Sensor Optical View Pattern (top view, in meters)

Note: Specifications are subject to change without notice.

VWMSpod-012WPI Motion Sensor

Operation and Specifications

SUREN

www.surensystems.com

IR Sensor:

Dual elements

Power Supply:

CR123A 3V Battery

Power Supply Current:

22uA ( no alarm )

Tamper Switch:

Sealed dome-contact

Housing Material:

High-impact ABS

Dimensions:

73.5 x 60.5x 43.5mm ( H x W x D )

Approvals/qualification:

( Pending )

Pet immunity:10Kg

Events Detection:

HighBar™ false alarm rejection

processor

RF Immunity:

20 V/m, 10-1000 MHz;

10 V/m, 1-2 GHz

White Light Immunity:

6500 lux

Sensitivity:

Selectable: 2-event or 3-event

Operating Temperature

Range:

-40°C to +55° C

Accessories:

Mounting bracket:

MB-100

1.0

2.3

1.0

3.0

0 3 6 9

2.0

1.0

2.3

0 3 6 9 12

Short range

Long range

Middle range

One FOV ( field of view)

Long range

Middle range

The VWMSpod-012WPI is a professional state-of-the art motion sensor

engineered with the world's best components and materials.starting with a

SUREN HihgView lens and a top quality infrared detector, Next, a patented

modern DSP ASIC directly converts the infrared detector signal into digital

form, for best reliability and stability. Finally, the signal is evaluated by a

SUREN’s HighBar™ processor, for "best-in-class" false alarm rejection with

excellent intrude

r detection.

SENSOR INITIALIZATION

Following power-on, a VWMSpod-012WPI sensor is fully operational after a

one-minute warm-up.

WALK TEST

Note: The VWMSpod-012WPI should be tested once per year.

The LED should turn ON (for Alarm) after about two to four normal steps.

Each time the LED turns ON, wait for it to turn OFF. Then, wait 12 seconds

before continuing the walktest.When there is no motion in the monitored area,

the LED should remain OFF. It can be turned off after 5 mins, so it doesn’t

continue to e

at up power.

ALARM PROCESSING

Dual-element detector fields-of-view alternate between (+) and (-)polarity.

HighBar™ -qualified signal events are counted as "pulses"exclusively when

polarity alternates. Depending on sensitivitysetting, (+,-), (-,+), (+,-,+) or (-

,+,-) will cause an alarm.

PET IMMUNITY

The VWMSpod-012WPI is designed to allow the presence of pets (10kg

or lighter) without signaling an alarm. It includes a special microelement

l e n s a r r a y t h a t p r o d u c e s m

u c h s t r o n g e r o p t i c a l s i g n a l s f o r

h u mans t h a n for p e t s 10kg o r lig h t e r . Furt h e r m o r e , th e o p tical

sensitivity of each VWMSpod-012WPI is factory-calibrated to ensure

accurate discrimination between humans and pets.

No te : P et s come in many var ie ti es . Some pets (e sp ec ia ll y l ar ge r

ones with very short hair), even if lighter than 10kg, may produce

enough infrared radiation to cause alarms. VWMSpod-012WPI users

are strongly advised to test the sensor wi

th their own pets, in order

to verify that the VWMSpod-012WPI will not signal an alarm when their

pets are moving within its fields of view.

The diagram below shows the VWMSpod-012WPI's zones of greatest

human/pet discrimination. The VWMSpod-012WPI should be mounted so

that pets will occupy onlythe lighter-colored spaces.

SUREN Part no.: 0-ML00-3134-01-1 Rev.3

Limitations of Sensor Products: Sensor products and associated systems do not offer guaranteed anyone for any consequential or incidental damages for breach of this or any other warranty, express or

emergencies. They m

ay fail to function for diverse reasons, including (but not limited to): power failure, negligence or fault.

dead batteries, improper installation, coverage “blind spots”, coverage areas overlooked during

Seller does not represent that the products it sells may not be compromised or circumvented; that the

installation, component failure, or inadequate maintenance. Sensors and their associated systems should

products will prevent any personal injury or property lo

ss by burglary, robbery, fire or otherwise; or that the

be checked weekly to ensure that all devices are working properly.

products will in all cases provide adequate warning or protection. Customer understands that a properly

SUREN LIMITED WARRANTY

installed and maintained alarm system may only reduce the risk of a burglary, robbery, or fire without

SUREN Systems, Ltd., of Fo Tan, Shatin, Hong Kong, warrants its products to be in conformance with its

warning, but it is not insurance or a g

uarantee that such will not occur or that there will be no personal injury

own plans and specifications and to be free from defects in materials and workmanship under normal use

or property loss as a result.

and service for twelve months from the date of original purchase. Seller's obligation shall be limited to

Consequently, seller shall have no liability for any personal injury; property damage or other loss based on a

repairing or replacing, at its option, free of charge for materials or labor, any pa

rt which is proved not in

claim the product failed to give any warning. However, if seller is held liable, whether directly or indirectly,

compliance with Seller's specifications or proves defective in materials or workmanship under normal use

for any loss or damage arising under this limited warranty or otherwise, regardless of cause or origin,

and service. Seller shall have no obligation under this Limited Warranty or otherwise if the product is altered

seller's maximum liability shall no

t in any case exceed the purchase price of the product, which shall be the

or improperly repaired or serviced by anyone other than Seller. For warranty service, return transportation

complete and exclusive remedy against seller.

prepaid, to SUREN Systems, Ltd., Unit 15, 12/F, Block B, Wah Sang Industrial Building, 14-18 Wong Chuk

Yeung Street, Fo Tan, Shatin, Hong Kong. Seller has no obligation to attend the buyer's location to retrieve

This warranty replaces any previous warran

ties and is the only warranty made by Seller on this product. No

the goods or make repairs on site.

increase or alteration, written or verbal, of the obligations of this Limited Warranty is authorized.

There are no warranties, expressed or implied, of merchantability, or fitness for a particular purpose or

otherwise, which extend beyond the description on the face hereof. In no case shall seller be liable to

U.S. Patent NO: 7,042,134 7,141,910 Patents issued and pending worldwide.

IR Sensor:

Dual elements

Sensitivity:

Selectable: 2-event

or 3-event

Events Detection:

HighBar™ false alarm

rejection processor

Housing Material:

High-impact ABS

Power Supply :

CR123A 3V Battery

Dimensions:

2.9” x 2.4” x 1.7”

( H x W x D )

RF Immunity:

20 V/m, 10-1000 MHz;

10 V/m, 1-2

Operating

Temperature Range:

-40°C to +55° C

Power Supply

Current:

22uA (no alarm) GHz

Approvals/

qualiﬁcation:

(Pending)

White Light

Immunity:

6500 lux

Mounting bracket:

MB-100

Tamper Switch:

Sealed dome-contact

Pet immunity:

60 lbs

www.versawireless.com

7.5’

3’

0 10’ 20’ 30’ 40’

7.5’

3’

0 10’ 20’ 30’ 40’

9’

6’

3’

0 10’ 20’ 30’ 40’

10’

20’

30’

40’

10’

20’

30’

Summary of content (4 pages)

PAGE 1
WALK TEST Note: The VWMSpod-012WPI should be tested once per year. The LED should turn ON (for Alarm) after about two to four normal steps. Each time the LED turns ON, wait for it to turn OFF. Then, wait 12 seconds before continuing the walktest.When there is no motion in the monitored area, the LED should remain OFF. It can be turned off after 5 mins, so it doesn’t continue to e at up power.
PAGE 2
VWMSpod-012WPIInstallation InstallationInstructions Instructions VWMSpod-012WPI VWMSpod-012WPI Installation Instructions VW-DP Motion Installation Instructions VWMSpod-012WPI Installation Instructions VWMSpod-012WPI Installation Instructions Mounting Location 1: 1: Mounting Location 1: Mounting Location 1: 1: Mounting Location Mounting Location Wall mounting: 1:A. Mounting Location A. Wall mounting: 1: Mounting Location A. Wall mounting: A.1.
PAGE 3
Quick Start Guide VW-DP Motion Detector Quick User Overview On power up: Flash LED Send RF power up message While tamper switch open and for 5 minutes after tamper switch closed: PIR is in “Walk Test Mode” If PIR triggers: flash alarm LED on for 2 seconds, send reed switch / loop alarm message After PIR alarm clears, send reed switch / loop alarm clear message Approximately 12 second hold-off between subsequent reed switch / loop alarm message transmissions and LED flash.
PAGE 4
Caution: This device complies with Part 15 of the FCC rules and Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment.