Install Guide BR31 Wireless Door Sensor Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401 sales@verkada.com All specifications are subject to change without notice Copyright © Verkada Inc. All rights reserved.
Document Document Details V1.0 (20210929) (V1.0 first published 20210929) Firmware Firmware version can be verified on Verkada Command command.verkada.com. 2 Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401 sales@verkada.com All specifications are subject to change without notice Copyright © Verkada Inc. All rights reserved.
Introduction What’s in the box 4x Wood Screws 1x Magnet Module 1x Sensor Module 1x Magnet Module Mounting Tape ● 3 2x CR123A batteries 1x Sensor Module Mounting Tape What you’ll need ● ● ● ● 4x Sheet metal Screws 1x T10 Security Torx L key Connect BH61 Wireless Alarm Hub A working internet connection Smartphone or laptop #2 phillips driver (screwdriver or power drill) 0.1 inch (2.
Introduction Sensor overview Test mode button Magnet mount and cover Status LED (Glow-though) Sensor Module Sensor Mount LED Behavior Test mode To enable test mode, press the top button. While in test mode, the green LED will: ● ● turn on when the sensor is separated from the magnet (door opened) turn off when the sensor is brought close to the magnet (door closed). After ten minutes in test mode, the device will return to normal operation.
Installation Mounting 1/5 Use the provided T10 Security Torx L-key to unscrew the security screw at the bottom of the product. Swing the sensor module out and disengage the hooks at the top of the sensor mount. Remove the battery pull tabs. 5 Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401 sales@verkada.com All specifications are subject to change without notice Copyright © Verkada Inc. All rights reserved.
Installation Mounting 2/5 Engage the hooks at the top of the sensor mount and swing the sensor module into place. 6 While the device is in test mode, place the sensor module and the magnet piece on the desired surfaces to see if the sensor registers a closed door (the sensor module’s LED will turn off when it senses a closed door). Door Door frame With a screwdriver, make pilot holes and screw the sensor mount into place. Door Door frame Verkada Inc.
Installation Mounting 3/5 Use the provided T10 Security Torx L-key to unscrew the security screw at the bottom of the magnet. Swing the magnet cover out and disengage the hook at the top of the magnet cover. Make sure to align the “align” mark and screw the magnet piece on to the desired surface. Door 7 Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401 sales@verkada.com Door frame All specifications are subject to change without notice Copyright © Verkada Inc. All rights reserved.
Installation Mounting 4/5 Engage the hooks at the top of the sensor mount and swing the sensor module into place. Door Door frame Door Door frame Use the provided T10 Security Torx L-key to secure the security screw in place. 8 Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401 sales@verkada.com All specifications are subject to change without notice Copyright © Verkada Inc. All rights reserved.
Installation Mounting 5/5 Engage the hook at the top of the magnet cover and swing the magnet cover into place. Door Door frame Door Door frame Use the provided T10 Security Torx L-key to secure the security screw in place. 9 Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401 sales@verkada.com All specifications are subject to change without notice Copyright © Verkada Inc. All rights reserved.
Appendix BR31 Compliance FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix Support Thank you for purchasing this Verkada product. If for any reason things don’t work right, or you need assistance, please contact us immediately. verkada.com/support Sincerely, The Verkada Team 11 Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401 sales@verkada.com All specifications are subject to change without notice Copyright © Verkada Inc. All rights reserved.