User's Guide

Your Quick Start Guide
53-10043-B0 10/28/15
© 2015 Verizon Telematics Inc.
HUMAG1115EN
Regulatory Information: FCC Requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
Modifications not expressly approved by Verizon Telematics Inc. could void the user’s authority to operate the equipment.
RF Exposure
This equipment complies with FCC Radio Frequency Exposure limits set forth for uncontrolled environment, when installed and operated so that a minimum
distance of 20 cm is kept towards the nearest human body.
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of
Apple Inc. iTunes is for legal or rightholder-authorized copying only. Don’t steal music.
Google Play is a trademark of Google Inc.
Welcome to hum.
* Something missing? Call us! [phone]
12 Volt Adaptor & Speaker Charging Cord
OBD II Readerhum Speaker
System in Your Box
*
TIP: Can’t find the welcome email? No worries—visit customer.hum.com, click “account setup”
and enter the email address associated with your account.
Create your hum account by clicking the link provided in your welcome email.
If you’ve already created your account, great! Jump to step 2.
Create Your Account
1
TIP: Your vehicle identification number (VIN) is commonly located on a plate at the top of the
dash on the driver’s side, viewable through the windshield.
Go to the App Store or Google Play
™
and download the hum app or
login in at hum.com to enter your VIN.
SM
Download the hum App and Provide Your VIN
2
TIP: Every vehicle is different, but OBD II ports are usually located under the driver’s side dash.
For help locating your OBD II port, visit www.hum.com/port.
IMPORTANT: Make sure your vehicle is OFF before installing your OBD II Reader. We
recommend charging your hum Speaker for at least 20 minutes prior to activation.
Simply plug the OBD II Reader into your vehicle’s OBD II port.
Then, turn on the hum Speaker and clip it to your visor.
Install the hum System
3
TIP: If you don’t hear the welcome greeting, press the blue button on your hum
Speaker or call [phone].
Congratulations!
Your car is now safer, smarter and more connected!
Go for a drive and listen for the welcome greeting from the hum Speaker.
If you hear it, you’ve activated successfully!
Drive to Confirm Activation
4
Regulatory Information: FCC Requirements
T
his device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
Modifications not expressly approved by Verizon Telematics Inc. could void the user's authority to operate the equipment.
RF Exposure
T
his equipment complies with FCC Radio Frequency Exposure limits set forth for uncontrolled environment, when the OBD Reader is installed and operated
so that a minimum distance of 20 cm is kept towards the nearest human body.
T
he `OBD II Reader' described in this document is also named the VT-100. The operating supply voltage is +6 to +20Vdc. The operating temperature range is
-40 to +70C.
T
he `hum Speaker' described in this document is also named the AT-660. The operating voltage is +4.75 to +5.25Vdc. The operating temperature range is -20 to
+60C.
T
he `OBD II Reader' and the `hum Speaker' comprise the `hum' product.
Apple Inc. iTunes is for legal or rightholder-authorized copying only. Don't steal music.
Google Play is a trademark of Google Inc.