Quick Start Guide This guide provides an overview of the basic functions of your devices and simple step-by-step installation instructions.
W Welcome Welcome to In-Drive®, an in-vehicle system that offers a suite of connected services within the Drive Safe & Save™ program. Central to the In-Drive solution is the use of a simple self-installed device that collects essential vehicle data, and based on your driving behavior, can offer you insurance discounts. Getting started with the Drive Safe & Save with In-Drive program is easy.
Table of Contents Table of Contents Before You Begin Checklist In-Drive Visor Clip Overview In-Drive Communicator Overview Installing Your Devices Charging Your In-Drive Visor Clip Pairing your mobile phone with the In-Drive Visor Clip (Optional) Pairing Your Android Smartphone with the In-Drive Communicator Device (Optional) Help & Contact Before you begin, make sure you: Enrolled with your State Farm agent or online Have your State Farm login information ready: Username Password Ensure all contents are
2 Device Overview In-Drive Connect Package Customers: • T he In-Drive Visor Clip is an optional component that can be paired with your Bluetooth capable mobile phone and used as a speakerphone for safe, hands free talking. 1 • T he Emergency and State Farm Buttons are inactive for In-Drive Connect customers.
3 Installing Your Devices 1. Install your In-Drive Communicator (Figure A) › Locate your vehicle’s On-Board Diagnostic (OBD) II port. − This port is usually located under the dash, beneath the steering wheel. › Plug the In-Drive Communicator into the OBD II Port. › The green light will illuminate confirming successful installation. 2. Install your In-Drive Visor Clip 1 (Figure B) › Place the In-Drive Visor Clip on the driver’s side visor.
4 Pairing Your Devices (Optional) Pairing your mobile phone with the In-Drive Visor Clip You can use your In-Drive Visor Clip as a speakerphone so you can talk hands free while you drive. › Turn your mobile phone’s Blue,tooth feature on – review your mobile phone’s manual for details. › Set your phone to search for Bluetooth devices. › Select “In-Drive Visor Clip” from the search results on your phone – then select OK. › If prompted for the PIN, enter 0000.
Start Saving Take a Drive › During your first trip, the In-Drive Communicator will begin collecting your driving statistics. › Some diagnostic information will be available immediately. › Most measurements will be available within 30 days. Login at www.statefarm.com® to: › Learn safe driving tips. › Personalize your account. › Review your driving performance › Adjust your driving score using the online discount calculator.
Help In-Drive Communicator › If you connect the device and the green light does not illuminate, this could indicate a blown fuse or an issue with the hardware. Check your fuse. and if you still experience a problem, contact 888-270-0267. In-Drive Visor Clip › The In-Drive Visor Clip supports mobile phones with Bluetooth 2.0 or higher. › The In-Drive Visor Clip can be paired with more than one mobile phone.
