User's Manual Part 2

ManualsBrandsVeriFone ManualsElectronicsPoint of Sale Terminal

OMNI 3600 TERMINAL AND OMNI 3600 BASE INSTALLATION

Omni 3600 Terminal

16 OMNI 3600 REFERENCE MANUAL

Printer Test

To ensure the printer is operating correctly:

1 Turn on the terminal by pressing the green enter key (see Figure 2, page 10).

2 Enter system mode by pressing F2+F4 at the initial copyright screen, and

entering the system mode password (see Passwords).

3 Toggle through the

SYS MODE MENU

screens, using the down arrow key until you

reach

SYS MODE MENU 6

4 Press F4 to enter the

Printer ID

screen.

5 Press F3,

Test

, to start the printer self-test.

The test printout, with printer information and repeating character strings, is

approximately 38 cm (15 in.) long.

Install/Replace

MSAM Cards

When you first receive your Omni 3600 terminal, you may need to install a

merchant smart card or one or more micromodule-sized security account

manager (MSAM) cards, or you may need to replace old cards. Often, these small

cards arrive on a larger, credit card-style plastic card, from which they must be

removed. The following procedure describes MSAM card installation.

1 Remove the battery (see Smart Battery)

2 Open the MSAM door located beneath the battery (Figure 9):

a Push down and back on the raised arrow on the door.

b Lift up on the raised arrow with the tip of your index finger.

c Open the door until it is in the upright position, resting against the end of

the terminal.

NOTE

To prevent damage to the print roller on the paper roll cover, always close the

cover by gently pressing down on the paper roll cover tab.

CAUTION

Observe standard precautions for handling electrostatically sensitive devices.

Electrostatic discharges can damage this equipment. An anti-static wrist strap

grounded to a metal surface is recommended.

Summary of content (15 pages)

PAGE 1
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Terminal NOTE To prevent damage to the print roller on the paper roll cover, always close the cover by gently pressing down on the paper roll cover tab. Printer Test To ensure the printer is operating correctly: 1 Turn on the terminal by pressing the green enter key (see Figure 2, page 10). 2 Enter system mode by pressing F2+F4 at the initial copyright screen, and entering the system mode password (see Passwords).
PAGE 2
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Terminal Figure 9 Open the MSAM Access Door The three MSAM cardholders are now accessible. Each cardholder consists of a hinged tilt-up cover attached to a connector base (Figure 10). Figure 10 MSAM Card Installation 3 Access the MSAM cardholders (reference Figure 10): a Unlock the cardholder: Slide the lock plate to the unlocked position, in the OPEN direction (Figure 11).
PAGE 3
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Terminal b Open the cardholder by pivoting the cover on its hinge away from the connector base (Figure 12). Figure 12 Insert MSAM Card into Cardholder 4 Remove any previously installed MSAM card by sliding the card from the cover. 5 Install an MSAM card by aligning the card and carefully sliding it within the guides on the cover until fully inserted.
PAGE 4
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Terminal 1 Remove screw from SIM card access door on back of Omni 3600 terminal (Figure 13). Figure 13 Remove SIM Door Screw 2 Remove the SIM card access door (Figure 14): Figure 14 Slide Off SIM Card Access Door 3 Open the SIM card holder and slide the SIM card supplied by your provider into the cardholder (Figure 15). NOTE Do not lose the SIM card dust cover or retaining screw.
PAGE 5
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Terminal Wireless Transactions Smart Card Reader Transactions To conduct a wireless transaction: • Ensure the terminal is in an optimal position for transmitting. • Follow the on-screen instructions provided with your application. To conduct a smart card transaction: 1 Position the smart card with the contacts up and insert it into the smart card reader slot in a smooth, continuous motion until it seats firmly (Figure 16).
PAGE 6
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Terminal Antenna (Some Wireless Models) NOTE For some Omni 3600 terminals to establish a wireless connection, an external antenna is provided. This connection allows communication with your service provider to upload transaction data from the terminal and download system upgrades to the terminal. Radio service is activated by your service provider. Most Omni 3600 terminals have an internal antenna and this section can be ignored.
PAGE 7
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Base If the unit is on a flat surface (for example, a table top) or docked in the Omni 3600 base, position the antenna so that it points directly at the sky. Soft detentes are felt and clicks heard when positioning the antenna. These detentes maintain antenna positions of 60°, 90°, and 180°.
PAGE 8
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Base Unpack the Shipping Carton Refer to Figure 20 and the following procedure while unpacking the Omni 3600 base shipping carton. OPTIONAL ACCESSORIES OMNI 3600 BASE TELCO CABLE (OPTIONAL) Figure 20 Omni 3600 Base Shipping Carton Contents 1 Remove the following items: • Omni 3600 base • Telco cable (optional) NOTE The power pack and power cable, spare battery packs, and Telco cable are available separately.
PAGE 9
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Base TERMINAL DOCKING CRADLE TELSET PORT Figure 22 TELCO PORT RS-232 PORT POWER PORT Omni 3600 Base Features: Back (Telco models) The Omni 3600 base • recharges the smart battery within a docked Omni 3600 terminal, • charges a spare smart battery pack placed in the spare battery dock, • establishes communications to a host through a 14.
PAGE 10
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Base • Omni 3600 base power LED: • Steady green indicates the Omni 3600 base is connected to the power adapter. • Not lit indicates the Omni 3600 base is not connected to the power pack, the power pack is not connected to the wall outlet, or the power is out. Table 1 illustrates different LED states.
PAGE 11
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Base Power Connection The Omni 3600 base unit must be plugged in to a power outlet to • recharge a smart battery in a docked terminal, • charge spare smart batteries, • communicate with peripheral devices, and • establish Telco host connections. WARNING Do not plug the power pack into an outdoor outlet.
PAGE 12
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Base Omni 3600 Terminal Docking NOTE Spare Smart Battery Pack Place the Omni 3600 terminal in the docking cradle (Figure 23) to recharge the terminal smart battery, establish communications connections for data transfers, and communicate with peripheral devices. The Omni 3600 terminal will not turn off or enter sleep mode while docked on the Omni 3600 base. This ensures that the unit is not placed into sleep mode during data transfers.
PAGE 13
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Base WARNING Do not dispose of batteries in a fire. Li-ion batteries must be recycled or disposed of properly. Do not dispose of Li-ion batteries in municipal waste sites. Omni 3600 Base Communications Ports NOTE The communications ports are located on the back of the Omni 3600 base (see Figure 25).
PAGE 14
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Base Figure 26 Direct Connection Pass-through connection — Run a telephone cord from the Telco port on the Omni 3600 base to the RJ11 jack on a standard telephone (Figure 27). Do not string the telephone cord across a walkway or place it so as to interfere in hightraffic areas. With a pass-through connection, the phone line is busy during downloads.
PAGE 15
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Base Check Readers Supported The Omni 3600 base supports two VeriFone check readers: CR 600 and CR 1000i. Contact your VeriFone representative or visit the online store at www.verifone.com for information on these devices. Figure 28 provides an example of a peripheral connection.