VERIX OPERATING ENVIRONMENT SOFTPAY Omni 3600 Reference Manual E-PAYMENT APPLICATION VERIX DEVELOPER TOOLKIT DEVELOPMENT TOOLS VERISHIELD SECURITY ARCHITECTURE OMNI 37XX HAND-OVER-COUNTER MULTI-APPLICATION APPLIANCES OMNI 33XX MULTI-APPLICATION APPLIANCES OMNI 3600 HAND-HELD RADIO MODEM APPLIANCES VERICENTRE APPLIANCE MANAGEMENT SUITE Part Number 22379, Revision A
Omni 3600 Reference Manual © 2003 VeriFone, Inc. All rights reserved. No part of the contents of this document may be reproduced or transmitted in any form without the written permission of VeriFone, Inc. The information contained in this document is subject to change without notice. Although VeriFone has attempted to ensure the accuracy of the contents of this document, this document may include errors or omissions.
CONTENTS CHAPTER 1 Omni 3600 Terminal and Omni 3600 Base Installation CHAPTER 2 Using the Terminal Keys CHAPTER 3 System Mode Select a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Omni 3600 Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Omni 3600 Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Environment . . . . . . . . . . . . . . . . .
C ONTENTS CHAPTER 4 Performing Downloads CHAPTER 5 File Authentication 4 System Mode Menu 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Edit Keyed Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . System Mode Menu 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . System Mode Menu 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C ONTENTS CHAPTER 6 Troubleshooting and Service The FILESIGN.EXE File Signing Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FILESIGN.EXE System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating Modes for FILESIGN.EXE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Command-Line Entries for FILESIGN.EXE . . . . . . . . . . . . . . . . . . . . . . . . Command-Line Mode Syntax Example . . . . . . . . . . . . . . . . . . . . . . . . . . . FILESIGN.
C ONTENTS 6 OMNI 3600 REFERENCE MANUAL
CHAPTER 1 Omni 3600 Terminal and Omni 3600 Base Installation This chapter describes how to set up and install the Omni 3600 terminal and Omni 3600 base, including how to: NOTE • protect the terminal from adverse Environmental conditions, • install and maintain the Smart Battery, • establish communications connections through the Omni 3600 Base Communications Ports, and • connect optional peripheral devices through the Omni 3600 base (see Peripheral Devices).
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Terminal • Never place the terminal in direct sunlight. CAUTION Do not use the Omni 3600 terminal or Omni 3600 base outdoors. They are for indoor use only, and are not waterproof or dustproof. Damage to the unit from exposure to sun, rain, or dust may void your warranty. • Keep the Omni 3600 terminal and Omni 3600 base away from anything that radiates heat, such as a stove or motor.
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Terminal PAPER ROLL SMART BATTERY PACK OMNI 3600 TERMINAL POWER PACK POWER CABLE (REGIONAL) MOD10 ADAPTOR (OPTIONAL) Figure 1 Omni 3600 Terminal Shipping Carton Components 1 Remove the following items: • Omni 3600 terminal • Power pack and power cable (if present) • Roll of thermal printer paper • Battery pack • MOD10 adaptor (optional) 2 Remove all plastic wrap from the Omni 3600 terminal and components.
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Terminal Terminal Features Figure 2 illustrates the physical features of the Omni 3600 terminal.
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Terminal The Omni 3600 terminal is equipped with a tamper-evident label (on a screw hole on the case bottom). Power Port On the back of the Omni 3600 is one port—the power port. Use this port to connect the Omni 3600 to the power pack to recharge the battery through the unit Connect Power Pack To connect the Omni 3600 terminal to power: 1 Insert the round barrel connector (Figure 3) into the power port on the back of the terminal.
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Terminal The following are features of the smart battery: • Two Li-ion cells • A fuel gauge module • NOTE • monitors state of charge (voltage and current), • communicates with the terminal (charge parameters and alarms to indicate full discharge), • determines full charge capacity (on charge cycle and uninterrupted discharge cycle), and • automatically shuts down when cell voltage is extremely low.
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Terminal Smart Battery Removal To remove the smart battery, press the locking tab at the top of the battery and pull the smart battery from its slot. Smart Battery Charging On initial use, the smart battery must be fully charged and fully discharged through normal operation. After unpacking your Omni 3600 terminal, install the battery and connect the power pack to the unit for 4 hours.
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Terminal NOTE It is recommended that you keep a spare, charged smart battery available. Smart Battery Life To ensure that you get the longest possible performance from the smart battery, it must be allowed to fully discharge periodically. The smart battery can be charged and discharged hundreds of times, but will eventually wear out.
O MNI 3600 TERMINAL AND O MNI 3600 B ASE I NSTALLATION Omni 3600 Terminal 2 Rotate the printer door up and back. Note that the door is hinged; it is not necessary to remove it from the unit. Figure 6 Open the Printer Cover 3 Loosen the glued leading edge of the paper from the roll. 4 Hold the paper roll so paper feeds from the bottom (Figure 7) and pull approximately two inches of paper free of the roll.
