Omni 3600 Installation Guide VeriFone Part Number 22060 Revision A
Lithium Battery Caution The Random Access Memory (RAM) contents in Omni 3600 terminals are protected by a lithium battery. Do not, under any circumstances, attempt to replace this battery. Failure to comply may void the product warranty. Document Title: Omni 3600 Installation Guide VeriFone Part Number 22060, Revision A Copyright © 2001 VeriFone, Inc. All rights reserved.
Omni 3600 Installation Guide Contents Introduction Select a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Omni 3600 Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Omni 3600 Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Convenience . . . . . . . . . . . . . . . . . . . . . . . . . .
Omni 3600 Installation Guide Omni 3600 Base Communications Ports . . . . . . . . . . . . . . . . . . . . . . . 40 Telephone Line Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Telephone Line Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 ISDN Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Peripheral Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories and Documentation How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Download Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Cables for Optional Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Omni 3600 Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Telephone Line Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Omni 3600 Installation Guide Figure 22 Figure 23 Figure 24 Figure 25 Figure 26 Figure 27 Figure 28 Figure 29 6 Omni 3600 Base Features: Back (ISDN and Telco models) . . . . . . . . . . . . . . . . . . . . . . . . .35 Power Pack Connection (Docked Terminal) . . . . . . . . . . .38 Spare Smart Battery Docking . . . . . . . . . . . . . . . . . . . . . .40 Omni 3600 Base Connection Ports . . . . . . . . . . . . . . . . . .41 Direct Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Omni 3600 Installation Guide Introduction This guide describes how to set up and install an Omni 3600 terminal and Omni 3600 base. It also includes information on how to • protect the terminal from adverse Environmental conditions, • install and maintain the Smart Battery, • establish communications connections through the Omni 3600 Base Communications Ports, and • connect optional peripheral devices through the Omni 3600 base Peripheral Devices.
Omni 3600 Installation Guide Environment WARNING • Do not use the Omni 3600 terminal or Omni 3600 base where there is moisture or high humidity, chemicals or oils, or excessive heat or dust. • Avoid locations near electrical appliances or other devices that emit excessive voltage fluctuations or electrical noise (for example, air conditioners, electric motors, neon signs, high-frequency or magnetic security devices, or computer equipment). • Never place the terminal in direct sunlight.
Omni 3600 Installation Guide WARNING Do not use the Omni 3600 terminal or Omni 3600 base near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using these products during electrical storms. Convenience Omni 3600 Terminal Keep the Omni 3600 terminal with you to perform transactions.
Omni 3600 Installation Guide Omni 3600 Terminal This section discusses the features of the Omni 3600 terminal, including • providing power to the Omni 3600 terminal, • charging the smart battery, • installing paper, • installing the antenna, • installing MSAM cards, and • completing magnetic card and smart card transactions. Unpack the Shipping Carton Open the shipping carton and carefully inspect the contents for possible tampering or shipping damage (Figure 1).
Omni 3600 Installation Guide 1 Remove the following items: • Omni 3600 terminal • Power pack and power cable (Mobitex and off-line models only) • Roll of thermal printer paper • Battery pack • Antenna (if unattached; wireless models only) 2 Remove all plastic wrap from the Omni 3600 terminal and components. 3 Remove the clear protective film from the display lens. WARNING Do not use a damaged or tampered with Omni 3600 terminal or Omni 3600 base.
Omni 3600 Installation Guide Terminal Features Figure 2 illustrates the physical features of the Omni 3600 terminal.
Omni 3600 Installation Guide Notice the following features of the Omni 3600 terminal shown in Figure 2: • The display • Four types of keys: • A 12-key, telephone-style keypad • Eight function keys: four function keys, labeled F1 to F4, right of the display; four unlabeled, programmable function (PF) keys above the keypad • Three keys (icons at right) under the keypad (left-toright: CANCEL/OFF, BACKSPACE, ENTER/ON) • An ALPHA key center above the keypad • The magnetic card swipe, above the display.
Omni 3600 Installation Guide NOTE If the tamper-evident label or any component appears damaged, immediately notify the shipping company and your VeriFone distributor or service provider. Power Port On the back of the Omni 3600 is one port—the power port—identified by the lightning bolt icon shown at right.
Omni 3600 Installation Guide Figure 3 Connect Omni 3600 Terminal Power Pack WARNING Do not plug the power pack into an outdoor outlet. Smart Battery The Omni 3600 wireless terminal uses an Li-ion smart battery (P/N 22044-01). The internal logic of the smart battery prevents both overcharging and undercharging (a fault condition in which the battery level goes well below the minimum acceptable charge and the battery becomes unusable).
Omni 3600 Installation Guide • monitors state of charge (voltage and current), • communicates with the terminal (charge parameters and alarms to indicate full discharge), • determines full charge capacity (on charge cycle and uninterrupted discharge cycle), and • automatically shuts down when cell voltage is extremely low.
Omni 3600 Installation Guide Smart Battery Installation The smart battery installs in a slot on the back of the terminal, as shown in Figure 4. The locking tab clicks when the battery is in place. The slot is keyed, so that there is only one proper way to insert the battery. Figure 4 Install the Smart Battery Smart Battery Charging You must charge smart battery prior to initial use. After unpacking your Omni 3600 terminal, install the battery and connect the power pack to the unit.
