CAN Wireless Receiver (CWR) Page 1 of 3
1.0 CAN WIRELESS RECEIVER 1.1 FUNCTION The CWR facilitates data transfers and other communications between the WDS and the TC3. 1.2 INSTALLATION The CWR is mounted onto the front pedestal using 1/4" self-tapping screws. VM0063 Screw, Hex Head Self Tapping 1/4"-14 x 1" Consider the following requirements when selecting a mounting location for the CWR: o Mount the CWR with the cables facing down.
1.3 CONNECTIONS The male M12 connector connects to a Bus Cable that runs to the Y Cable Assembly. VM0444 1.5 Meter 3.1 Bus Cable The female M12 connector connects to a Bus Cable that runs to the DRS. VM0444 1.5 Meter 3.1 Bus Cable 1.4 FCC Per FCC 15.19(a)(3) and (a)(4) This device complies with part 15 of the FCC Rules.