User's Manual

095209 Wireless Optical Mouse User Manual
Welcome
Thank you for selecting this product! Your RF wireless optical mouse uses a newly developed RF wireless
technology 27MHz that replaces the traditional wired mouse. You can use your wireless optical mouse freely and
improve your efficiency and enjoy your beautiful life from the high technology. The receiver of this mouse can be put
into its transmitter, and it is an outstanding design.
Product Features
1，Radio frequency 27MHz, enjoy your freely wireless space
2， It has 256 ID code, there is no interference even many mice being used at the same time.
3，Automatically save power sleeping functions, battery life be prolonged.
4，5 buttons and free definition functions .
Systems Compatibility
IBM PC and Win 95/98/Me/2000/XP, No need driver
The Steps of Install Battery
1，Please prepare for two PCS new AA alkaline batteries
2，Press the two sides of the mouse transmitter and pull the battery cover rearward (Please see the reference
picture)
3
，
Please insert the batteries correctly according to the polarity marks of the battery grooves.
4
，
Pull the battery covers forward, when you hear “crack” sound which shows the battery cover is locked
successfully.
。
Receiver Installation
1，please use extended cable, and put the receiver and transmitter on one desktop, in this way, you may have
higher working efficiency.
2， If you use PS/2 connector, please use the USB to PS/2 adaptor and connect with the connector before your
computer start-up For laptop, you may connect the receiver directly with the USB connector.
ID Setup
1，Please move the mouse near to the receiver
2，press the ID button I the front of the receiver,the light of the receiver begains to flicker.
3，Press the ID button of the mouse bottom with some hard and acuate object within 10 seconds, the receiver
light will flash very fast, a few seconds later it will be on which shows it is successfully to finish the digital
transmission between the mouse and the receiver. You may start to use it.
4
，
Working distance: within 1-2 m.
user-defined buttons
after the installation of drive program,users can self define the buttons freely, as long as to press the button
predefined, we can turn on the preseted function
。
before use self defined buttons, please install drive program first,
so that we can use software to define functions
Installation of drive program
put the drive program disk into the CD-room,unfold the disk and run the file named setup.exe.The system will run
files automatically and appear the picture below
3 4