Data Sheet

ManualsBrandsVeracity ManualsComputers & AccessoriesPower Supply for 8x Longstar LITE Units

Deliver unsurpassed

power and bandwidth

over extreme distances

of coaxial cable

Cut costs and installation time by re-using

long runs of legacy coax cabling, especially

in rail and metro applications.

DATASHEET

EXTREME DISTANCE

LONG RANGE ETHERNET OVER COAX

LONGSTAR

| Long range Ethernet and POE over new or legacy coaxial cable

| Unrestricted 100Base-T and POE over 1400m (4,600ft) on RG11

| Ruggedised for high-performance over extreme temperature range

| Fully automatic, simple to install and maintenance-free

| BS EN 50121-4 compliant (rail and metro)

| Up to 4.2km (2.5 miles) data-only link at 10Base-T without POE

ETHERNET OVER COAX

Summary of content (4 pages)

PAGE 1
E T H E R N E T O V E R C O A X D ATA S H E E T LONG RANGE ETHERNET OVER COAX LONGSTAR EXTREME DISTANCE Deliver unsurpassed power and bandwidth over extreme distances of coaxial cable | Long range Ethernet and POE over new or legacy coaxial cable | Unrestricted 100Base-T and POE over 1400m (4,600ft) on RG11 | Ruggedised for high-performance over extreme temperature range | Fully automatic, simple to install and maintenance-free Cut costs and installation time by re-using long runs of legacy
PAGE 2
Long-range Ethernet with POE over coax at distances up to 1,400 metres HIGHWIRE Longstar’s ruggedness and high performance is particularly suited to rail, metro and industrial applications HIGHWIRE Longstar delivers unsurpassed distances HIGHWIRE Longstar delivers a full bandwidth 100Base-T network signal and POE Plus over unsurpassed lengths of regular coaxial cable.
PAGE 3
I M A G I N A T I O N | I N N O V A T I O N | D ATA S H E E T I N T E G R A T I O N HIGHWIRE Longstar is a rugged and low-cost alternative to fibre, also with power delivery HIGHWIRE Longstar is also suited to new coax installations, due to the low levels of signal distortion through long runs of RG6 or RG11 cabling Simple Rackmount Option Up to 24 HIGHWIRE Longstar Base units can be rack-mounted using the simple 1U space-saving bracket.
PAGE 4
E T H E R N E T O V E R C O A X TECHNICAL SPECIFICATION POWER (Non POE models) Unit power DC Power input POWER (POE models) Unit Power POE in (Base) POE out (Camera) DC power in (Base) LONGSTAR INTERFACE Connector Cable Rate LONGSTAR 1.0 watts Detachable screw terminal for class II isolated external supply 8-57 volts DC or 20-28 volts AC, max 100mA 1.0 watts IEEE 802.3af (POE) or IEEE 802.3at (POE Plus), 2-event, power class 4 IEEE 802.3af (POE) or IEEE 802.