EN Laptop Ordenador portátil User manual Manual del usuario CN6Q15 / CN6QF5 / NS15A6 avita-americas.
IMPORTANT SAFETY INSTRUCTIONS Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• WARNING: Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus. Use the device where the ambient temperature is between 0 and 35°C (32 to 95°F). Low or high temperature conditions might cause the device to change its behavior to regulate its temperature. Using this device in very cold conditions outside of its operating range might temporarily shorten battery life and could cause temperatures.
FCC information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
Copyright and Trademark Notices Intel, the Intel logo and the Intel Inside logo are trademarks of Intel Corporation in the U.S. and/or other countries. Windows and windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
Contents Safety Precautions ...............................................................................1 Getting Star ted ................................................................................. 7 Getting to know your AVITA laptop ....................................................................... 7 Charging your AVITA laptop ..................................................................................... 10 Turning your AVITA laptop on .................................................
Getting Started Getting to know your AVITA laptop Top view EN EN - 5
Microphone For voice input. Camera indicator The camera indicator lights up when the built-in camera is in use. Camera The built-in camera allows you to take still photos and record videos. Power button Press to turn the Laptop on or off. Power indicator The power indicator lights up when the Laptop is powered on and blinks slowly when the Laptop is in Standby mode. Fingerprint sensor Scan a fingerprint to unlock the screen. Refer to the Fingerprint recognition section on page 19 for more information.
Right side HDMI OUT port Connect to a TV or a display device. USB Type-C port (5V DC, 1.5A) Connect to a USB storage device or a mouse, keyboard, or camera. Supports DisplayPort™ audio/video output. EN USB 3.0 port (5V DC, 1A) Connect to a USB storage device or a mouse, keyboard, or camera. DC jack Connect with 19V DC charger. Charging indicator Show the battery's charge status.
Charging your AVITA laptop IMPORTANT! Please Read. We recommend fully charging your Laptop before using it for the first time. For optimum performance, please connect the provided AC adaptor to your Laptop when it falls below 20% charge. To wall outlet Charging indicator Charging indicator Orange: Charging Green: Fully charged Orange (blinking): Low battery • • • Use ONLY the included AC Adaptor to charge the battery. The AC Adaptor may vary in appearance, depending on models and your region.
Turning your AVITA laptop on rst time When using the Laptop for the first time, you will be required to setup the following: 1. Press the Power button to turn on your Laptop. Power on Standby EN (White) (White-breathing) 2. Select the language, then click Yes . 3. Follow the onscreen instructions to configure your Laptop. About Windows Activation Windows will be active automatically once you connect your Laptop to a WiFi network.
Turning your AVITA laptop off 1. Click the icon in the lower-left corner of the screen or press the the keyboard to get to the Start menu. Start key on 2. Click the Power icon in the lower-left corner of the screen, it will display 3 options (Sleep, Shut down and Restart). 3. Select Shut down to power the Laptop off. • • NOTE Save all data before turning your Laptop off.
Power Management When the apparatus is not connected power adaptor and not providing the main function or when other energy-using products are not dependent on its function, the default system settings and its characteristics enable the apparatus to activate display sleep mode within 5 minutes of user inactivity, and to activate a distinct sleep mode within 10 minutes of user inactivity.
Basics Start menu Microsoft Windows 10 is a new operating system that is used to control a computer. Click the icon in the lower-left corner of the screen to get to the Start menu. You can also open the Start menu by pressing the Start key on the keyboard. Live titles Taskbar Live Tiles on the screen change and update in real time so you can get real-time updates about news or sports, check what your friends are up to, and get the latest weather forecast.
Settings Allows you to access the settings of your Laptop. Click it to enter the Settings screen. Power Click icon to Sleep, Shut down or Restart your Laptop. Start Click the Start icon to open/close the Windows Start menu. EN Taskbar The below table lists some of the frequently used icons in the Taskbar: Icon Description Shows the battery status. Displays when a Wi-Fi network connected. Displays when there is NO a Wi-Fi network connection or Wi-Fi is turned off. Airplane mode is on.
Action Center It allows you to receive system notifications, such as updates. It also has a really useful Quick Actions on the bottom. Checking notifications 1. 2. Click the icon in the lower-right corner of the screen to launch the ACTION CENTER screen. All messages appears in the Action Center and you can select and click them to read. Tip: You can go to Settings -> System -> Notifications & actions to set the Notifications and Actions.
Quick Actions menu Tablet mode Opens or closes the Tablet mode. Network Enables or disables Network, and connects to a wireless network so that you can check email, search the Web, access social media websites. All settings Allows you to access the settings of your Laptop. Nearby sharing Turns on/off Nearby sharing. Airplane mode Enables or disables Airplane mode. Turns it on to stop all EN wireless communication. Location Enables or disables Location.
Task view If you have a lot of apps and programs opened, click the icon on the taskbar to see all of your running apps and programs. You can select and click any item to open it. Creating a new desktop Select and click + New desktop, a new desktop will be added. Then you can open your desired apps and programs on the new desktop. Desktop list Deleting a desktop Move the cursor over the desktop you want to delete, then select right corner of the desktop.
Fingerprint recognition Unlock the screen using your fingerprint rather than entering a password. Setting up your fingerprint account You need create a Password first to use the fingerprint feature. 1. Go to Settings -> Accounts -> Sign-in options. EN 2. Select Add under Password to create a password. 3. Select Set up under Fingerprint to start the fingerprint registration. 4. Follow the onscreen instructions to set up your Fingerprint account.
Using the Touchpad Use the Touchpad to move the cursor or select an item. The left and right buttons of the Touchpad act the same as the left and right buttons of a mouse. Moving Slide your finger on the Touchpad to move the cursor. Left-click Tap the touchpad or press the left touchpad button. • • In the Start menu, click an app to launch it. On the File Explorer desktop, double click an application to launch it. Tap or Press Right-click To right-click an item, press the right touchpad button.
Dragging and dropping Press and hold the left button. Select an item using your other finger then drag and drop it to a new position. Two-finger scroll (up/down) Slide two fingers to scroll up or down. EN Two-finger scroll (left/right) Slide two fingers to scroll left or right. Zoom out Pinch two fingers while viewing a website, map, or image. Zoom in Spread two fingers apart while viewing a website, map, or image. • NOTE Please keep your fingers dry and clean when using the Touchpad.
Using the Keyboard Function keys Press and hold the Fn key, then press a hot key to trigger the following commands: Turns the Airplane mode on and off. Decreases the screen brightness. Increases the screen brightness. Enables or disables the Touchpad. Launches Windows Settings. Turns the speakers on and off. Decreases the sound volume. Increases the sound volume. Adjusts the keyboard backlight’s brightness or turn it off. Plays or pauses a selected media file. Prints the current screen.
Windows keys You can also use the following shortcuts to help you to launch the applications and navigate the Windows 10. Opens or closes the Start menu.
Chooses the programs on the taskbar Opens Ease of Access setting menu Opens the context menu of the Start button Connections and Setup Inserting a microSD card Insert the microSD card (sold separately) into the Laptop’s microSD slot until it clicks. To check the storage of the microSD card, go to Settings -> System -> Storage. Remove the microSD card by pushing in on the card's edge. The card will pop out and can be removed.
External display You can connect the Laptop to an external display device. The cables required to connect an external display are sold separately. Connecting to a display 1. Connect the Laptop to a TV or other display device using an HDMI cable (not included) through the HDMI port. TV EN HDMI cable (not included) 2. Turn on your TV or other display device and select its input mode. 3. Go to Action Center menu, select and click Project.
4. Select your desired mode as following: PC screen only Shows the screen on the Laptop only. Duplicate Shows the screen on both the Laptop and the external display. Extend Extends the screen to the external display. Second screen only Shows the screen on the external display only. Tip: You can also select the dual view (extend) mode. Go to Settings -> System -> Display, and select Detect on the Multiple displays option.
Connecting to a Wi-Fi network Connect the Laptop to a wireless network to use the Internet. 1. On the Taskbar, select and click . Access Point (AP) list EN 2. Select a network from the list of detected wireless networks and select Connect automatically -> Connect 3. Enter the Access Point's password, if necessary, and select Next. Tip: You can also go to Settings -> Network & Internet -> Wi-Fi, click it to On.
• • NOTE If the device finds a network that you connected to previously, it will connect to it automatically. If the Wi-Fi network does not appear in the list, it maybe a hidden network, please click "Hidden Network" and input SSID name of network along with password for a connection. Airplane mode The Airplane mode disables the wireless connection, allowing you to use your Laptop safely while in-flight. If you see icon displayed in the lower-right corner of the screen, the Airplane mode is on.
Bluetooth You can use Bluetooth to communicate between the Laptop and other Bluetooth devices, such as a smartphone. 1. Go to Action Center menu, select and click Bluetooth to turn it on. EN 2. Then the Laptop will be a discoverable bluetooth device and you can scan it on your other bluetooth device. Tip: You can also go to Settings -> Devices -> Bluetooth, click it to On. Brightness You can adjust the brightness level of the screen accroding to your requirements.
Using the taskbar to adjust brightness Click the icon in the lower-right corner of the screen to launch the ACTION CENTER menu. Drag the bar to adjust the brightness. Brightness adjustment bar Volume You can adjust the system volume or sound volume when playing music or video. Using the keyboard to control volume Press and hold the Fn key, then press the F7 key to decrease the sound volume. Press and hold the Fn key, then press the F8 key to increase the sound volume.
Troubleshooting When a problem occurs with the Laptop, it is easy to restore the Laptop to the factory default settings. Back up important data regularly before a problem occurs with the Laptop. You can go to Settings -> Update & security -> Recovery to recover your Laptop. Reset this PC If your PC isn't running well, resetting it might help. This lets you choose to keep your personal files or remove them, and then reinstalls Windows. Click Get started and then choose an option.
Laptop is frozen or a serious error appears • If the Laptop is frozen or suspended, you may need to close the application or refresh your Laptop. • If the Laptop is frozen or slow to respond, press and hold the power button for several seconds and follow the on-screen instructions to force SHUT DOWN the unit, then press the power button to turn on your Laptop again. Specifications Processor Intel® i3-1005G1 CPU Speed 1.
