User's Manual

FCC Statement:
This device complies with part 18 of the FCC rules.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 18 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
Note: Modifications to this product will void the user's authority to
operate this equipment.
Part & Function
Setup
#1DC jack
#2 Vibration Pad
On/Off
Switch
#3 Vibration out
VIBRATION PAD
Vibrator
Wire
plug
This vibration pad only works with the Multi-Alert system receiver.
When using the vibration pad, move the function switch to the on position.
On
Off
Pad
Pad
On
12V
Ready
#4 12V ready indicator
#5 Pad On indicator
RoHS
2002/95/EC