User's Manual

Patent Pending
P/N 88-812 Rev. 3
THE WIRELESS TEMP SENSOR SYSTEM IS MADE UP OF AT LEAST ONE THERMOSTAT WITH A
S1-LXRFM THERMOSTAT RF MODULE INSTALLED AND AT LEAST ONE WIRELESS TEMP SENSOR.
SUGGESTED USES FOR ONE WIRELESS TEMP SENSOR:
SUGGESTED USES FOR MULTIPLE WIRELESS REMOTE SENSORS:
To report the outdoor temperature when using a compatible thermostat.
It is recommended to attach the wireless sensor to a north-facing wall
where it will not be in direct sunlight or the spray of sprinklers.
To report the temperature of a room, such as that of a baby’s room when
using a compatible thermostat.
To control the temperature in a space that is different from where a
compatible thermostat is located.
To control to the average of multiple wireless sensors in a large open
space using a compatible thermostat. This type of application would
include large, open office areas.
One outdoor sensor and up to 8 indoor sensors may be used with 1
thermostat.
The thermostat automatically averages the temperatures from up to 8
linked wireless indoor sensors.
If more than 1 wireless indoor sensor is used with 1 thermostat, then
each sensor must have a different ID Number.
WIRELESS TEMP SENSOR
The S1-LXRFTS requires 2 AAA batteries.
Front Cover Removed
Link Button
DIP
Mounting
Mounting
Bottom
Top
Screw
Screw
Batteries
DIP Switch
Legend
Link LED
+
+
Setup & Installation
The wireless sensor must be linked to a thermostat with an
RF Module installed for proper communication and operation.
RF Module
Installation
Using the supplied screws, attach the rear housing
the mounting surface. For outdoor applications it is
recommended to install the sensor on a surface that is
not in direct sunlight. The components of the sensor
have been precoated at the factory to give limited
protection against moisture.
to
Install 2) AAA batteries as illustrated above.
Battery type recommendation:
Temperature range: 32-120 Fahrenheit, Alkaline.
Temperature range: 0-130 Fahrenheit, Lithium.
+
+
IMPORTANT: DO NOT MOUNT SENSOR IN DIRECT SUNLIGHT
S1-LXRFTS
WIRELESS TEMP SENSOR
S1-LXRFM
Switches
(ACCSRY)
Button
Accessory
To average with a thermostat’s internal sensor.
To average with a thermostat’s internal sensor.