vBox2 is microprocessor driven IoT device for data collection from vending machine or coffee machine components using various standardised protocols. vBox2 transmits collected data over GPRS network to Vendon server gateway. Device firmware is preloaded and managed centrally using Over-TheAir technology. vBox2 supports user (operator) interaction via multi- purpose configurable function button. User operations are confirmed with sound signals. Device status indication LEDs are located on front panel.
Reset button Function button Power, online and operation status LEDs USB Mini-B connector Cellular antenna connector 3
Blinking (slow) - preparing cellular modem on vBox2 start up. OFF - vBox2 device is off. Red - modem status ON - modem is connected and communicates with the server (online). Blinking (fast) - modem is ON, and is exchanging data with the server (online, processing).
Do not dissemble or modify vBox2 device. Dismantling of the vBox2 (dismantling of the plastic casing or intervention in the PC board) can affect device’s functioning or damage device. Avoid liquid penetration into vBox2 device. Install or relocate vBox2 device only when disconnected from the power supply. Only cables provided by Vendon must be used. Do not alter the cables provided with the vBox2. A visual inspection of the vBox2 device must be performed on a regular basis.
vBox2 power supply is provided by connection C1 (see vBox2 components). Use only power source of type “PS1” with internal power limit up to 15W. Unit shall be supplied from LPS (Limited Power Source). Using a series fuse is recomended. 9-24V AC 400-200mA Contains: FCC ID: 2AZE3-VP-B244G Contains Transmitter Module FCC ID: 2AJYU-8VC0001 NOTE: This device complies with part 15 of the FCC Rules.
Attach an antenna. For better network reception place the antenna outside of the vending machine.
Krasta 44, Riga, LV-1003, Latvia +371 2866 9995 vendon@vendon.net www.vendon.