VK-1000 APP Quick Guide Getting Started z Turning the VK-1000 On or Off To turn the VK-1000 on Long press button 3 seconds will turn on the VK-1000. Once VK-1000 be turned on Green LED will flash twice. To turn the VK-1000 off When VK-1000 on active mode, long press button 3 seconds will turn off the VK-1000. Once VK-1000 be turned off Red LED will flash four times. z Pairing. Long press button 6 seconds will turn on the VK-1000 and enter pairing mode.
VK-1000 APP Quick Guide z Working with iPhone 4S Make sure the Bluetooth radio has been enabled of iPhone4S. Press Setting Select General 20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C. Tel. No.:+886-2-2698-3608 Fax No.
VK-1000 APP Quick Guide Turn on the Bluetooth setting. Back to the main screen and run Vencer BLE Phone Finder APP. 20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C. Tel. No.:+886-2-2698-3608 Fax No.
VK-1000 APP Quick Guide Long Press VK-1000 Button for 6 seconds to enter the pairing mode for VK-1000. Red/Green LED will flash alternative. Press search button to search the BLE device. APP start to searching. 20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C. Tel. No.:+886-2-2698-3608 Fax No.
VK-1000 APP Quick Guide Found VK-1000 BLE device. Click VK-1000 to establish the connection. 20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C. Tel. No.:+886-2-2698-3608 Fax No.
VK-1000 APP Quick Guide VK-1000 connected with iPhone4S and go to setting page. Press back button to back to previous page. 20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C. Tel. No.:+886-2-2698-3608 Fax No.
VK-1000 APP Quick Guide Press search button again to search 2nd device. Click second VK-1000 to establish the connection 20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C. Tel. No.:+886-2-2698-3608 Fax No.
VK-1000 APP Quick Guide Both two VK-1000 devices connected with iPhone4S. Alert setting. 20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C. Tel. No.:+886-2-2698-3608 Fax No.
VK-1000 APP Quick Guide z z z z z Find me. z z Battery indicator: Indicator the power status. Device signal strength: The right side signal higher than left side. User setting for alert signal: (-70) means the signal strength less than -70 the alert will be enable. Alert level setting: Setting the alert method that user preferred. High: Continuously beep 100 times. Middle: Continuously Red LED flash 100 times. No any alert.
VK-1000 APP Quick Guide This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
