Cattle Rider User Manual Copyright © 2021, Vence, Corp.
Overview The Vence Cattle Rider (CR) is a livestock collar used for tracking and managing cattle. The CR is a battery powered device utilizing the following sensors to gather animal data: accelerometer, magnetometer, gyroscope, temperature sensor, GPS module. Sensor measurements are gathered and reported to the Vence Herd Manager (HM) management system via a LoraWan embedded radio.
Installation Guidelines: Cattle Rider collar is adjustable for neck circumference via metal slides on either side of the counter weight. Care should be taken to ensure collar will be centered on the animals neck. With proper adjustment, the counter weight will sit slightly offset from the bottom of neck.
Cattle Rider Specifications: Mechanical/Environmental Operating Temperature -40C to 85C (up to 100% RH) Rugged Enclosure 4.4” W x 7.4” L x H Electrical Power Replaceable Tadiran TL-4930 D Cell (Note: 2) 2.5V to 3.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Industry Canada statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).