VELUX INTEGRA® KLR 200 Operation 2 Smart operation - Groups Deleting a group You can delete a group if it is not relevant anymore. The example shows how to delete the group "South windows". Note: Only the group is deleted. You can still operate the products individually via the product navigator. . 1 Tap 3 Tap "Delete group". Tap "Groups". 2 4 2 1 5 Tap "Yes". 7 The group "South windows" is not in the product navigator anymore.
VELUX INTEGRA® KLR 200 Operation 2 Smart operation - Rooms Creating a room You can create rooms corresponding to the actual rooms in your home, and put your VELUX products in them. This makes it easier to find and operate the right products. The example shows how to create the room "Bedroom" including Window 4 and Window 5 in it.
VELUX INTEGRA® KLR 200 Operation 2 Smart operation - Rooms Editing a room You can change the contents of a room by adding or removing products. The example shows how to add Roller shutter 2 and Roller shutter 1 to the room "Bedroom" already consisting of Window 4 and Window 5.
VELUX INTEGRA® KLR 200 Operation 2 Smart operation - Rooms Renaming a room You can change the name of a room. The example shows how to change the name "Bedroom" into "Child's room". . 1 Tap 3 Tap "Rename room". Tap "Rooms". 2 4 2 Tap "Bedroom" 2. Tap 2 Select "Child's room" 2. Tap 1 . 1 5 7 Scroll down the display to find a name for the room on the list. Note: You can also enter a name of your own by tapping "Enter name". For use of keyboard, see the section Keyboard.
VELUX INTEGRA® KLR 200 Operation 2 Smart operation - Rooms Deleting a room You can delete a room if it is not relevant anymore. The example shows how to delete the room "Child's room". Note: Only the room is deleted. You can still operate the products individually via the product navigator. . 1 Tap 3 Tap "Delete room". Tap "Rooms". 2 4 2 1 5 Tap "Yes". 7 The room "Child's room" is not in the product navigator anymore.
VELUX INTEGRA® KLR 200 Operation 2 Smart operation - Favourites Editing order of products in the product navigator If you use some products, groups or programs more often than others, it may be convenient to show them in another order in the product navigator. The example shows how to put the products Window 4 and Window 5 first in the product navigator. 1 Tap . 3 Tap "Order of products". 5 Tap 7 Scroll down the display to find the relevant product, in this case "Window 5".
VELUX INTEGRA® KLR 200 Operation 2 Smart operation - Favourites Editing favourites When activating the function "Favourites", the product navigator only shows the products, groups and/or programs you use most often. You can at any time choose to see all your products, groups and/or programs again. The example shows how to choose Window 1, Roller shutter 1 and Venetian blind 1 as favourites. In consequence, these products will be the only ones shown in the product navigator.
VELUX INTEGRA® KLR 200 Operation Operation without using the control pad 2 Manual operation of centre-pivot windows You can open and close your centre-pivot window manually. If the window is already open, you must close it fully via the control pad first. • Open the window by pulling downwards on the control bar of the window. • Close the window again by pushing the control bar back again.
VELUX INTEGRA® KLR 200 Operation 2 Operation without using the control pad Closing centre-pivot windows in case of power failure or discharged battery A B 1 2 In case of power failure or discharged battery, you can close your centre-pivot window manually by disengaging the chain on the ventilation flap of the window. There are two different ways of doing this, depending on window type, where the ventilation flap can look like A or B .
VELUX INTEGRA® KLR 200 Operation 2 Operation without using the control pad Closing windows if the control pad has been mislaid If your control pad has been mislaid, you can still close your window by carrying out the following actions. Note: This feature is only available for the products shown. Centre-pivot windows 1 Determine window type A or B as shown on the previous page. Disengage the chain according to window type. 2 Press the test button on the window operator briefly.
VELUX INTEGRA® KLR 200 Setting up 3 Start-up of a new VELUX INTEGRA® system Initial set-up Before you can operate your VELUX INTEGRA® products, they must be registered in the control pad. 1 Remove the battery compartment lid by pressing the release button with a screwdriver as illustrated 1 , 2 . Insert batteries (type AA/LR6) 3 . Replace lid. 1 3 2 In the display screen, roll the wheel in the directions of the arrows to choose language 1 . 2.
VELUX INTEGRA® KLR 200 Setting up 3 Start-up of a new VELUX INTEGRA® system If the initial set-up fails If the control pad cannot find some of the products, you can make the products ready for registration by manually resetting them to their initial factory settings. Note: Reset products cannot be operated until they have been registered in the control pad. See the section Initial set-up. Products can be reset in different ways, depending on window type.
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system Adding products to the control pad You can operate up to 200 products, for instance windows, roller shutters and blinds, by registering them in your control pad. The example shows how to add more products to the control pad by following the instructions in the display. . 1 Tap 3 Tap "Add new products". 5 Tap when the control pad has found the products. 2 Tap "New product". 4 Tap . You can now operate the new products.
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control Adding a control to your system already operated with a VELUX INTEGRA® control pad KLR 200 "Control" is used as a generic term for all devices that can operate VELUX INTEGRA® products. To operate your VELUX INTEGRA® products with additional controls, the contents of the control pad KLR 200 already in use can be copied to other controls.
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control Adding a VELUX INTEGRA® control pad KLR 200 to your system already operated with a control pad KLR 200 The instructions below show how to copy the contents of one control pad KLR 200 to another. Control pad KLR 200 to send a copy is called control A . Control pad KLR 200 to receive a copy is called control B . A First execute items 1-4 with B .
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control Now execute items 5-8 with 5 A . Tap . 6 A A 7 Tap "Copy control pad". 8 Tap . A A You now have two minutes to execute item 9 with 9 Tap "New product". B . Tap "Receive copy". B Follow the instructions in the display and tap when you are ready. 11 Tap on both control pads to finish. 10 Tap "OK".
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control Adding a VELUX INTEGRA® controller KRX 100 to your system already operated with a control pad KLR 200 The instructions below show how to copy the contents of control pad KLR 200 to controller KRX 100. See also the instructions for the controller. Note: Only available for VELUX INTEGRA® products with radio frequency 868 MHz. Control pad KLR 200 to send a copy is called control A .
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control Prepare sensors and register them in the controller. Note: You have 10 minutes to execute items 4-8. Prepare sensors for registration: Press the button at the bottom of the sensor with a pointed object for at least 5 seconds until the diode flashes.
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control You now have two minutes to execute item 14 with 14 B AUTO SET-UP Prepare products for registration and press Register Register INFORMATION B VELUX ACTIVE enabled 18 . Press "Register" in the controller to start registration. 15 AUTO SET-UP Registration is running. This may take several minutes. B Back 16 Menu B Details The display shows that the program VELUX ACTIVE has been enabled.
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control Adding a VELUX INTEGRA® remote control without display to your system already operated with a control pad KLR 200 The instructions below show how to copy the contents of control pad KLR 200 to the remote control without display. See also the instructions for the remote control. Note: Only available for VELUX INTEGRA® products with radio frequency 868 MHz. Control pad KLR 200 to send a copy is called control A .
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control Adding a VELUX INTEGRA® control switch KLI 110 to your system already operated with a control pad KLR 200 The instructions below show how to copy the contents of control pad KLR 200 to control switch KLI 110. See also the instructions for the control switch. Control pad KLR 200 to send a copy is called control A . Control switch KLI 110 to receive a copy is called control B .
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control Adding a VELUX INTEGRA® interface KLF 050, which is fitted into a wall switch/socket of another make, to your system already operated with a control pad KLR 200 The instructions below show how to copy the contents of control pad KLR 200 to interface KLF 050 fitted into a wall switch/socket of another make. See also the instructions for the interface.
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control Adding a VELUX INTEGRA® interface KLF 100 to your system already operated with a control pad KLR 200 The instructions below show how to copy the contents of control pad KLR 200 to interface KLF 100. See also the instructions for the interface. Control pad KLR 200 to send a copy is called control A . Interface KLF 100 to receive a copy is called control B . A First execute item 1 with 1 B B .
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control You now have two minutes to execute item 6 with 6 B A B CD E F GH SYSTEM SETTINGS Register products Select products Security key Enter Back 8 INFORMATION B New products registered . Press to highlight "Register products". Press "Enter" to confirm your choice. 7 AUTO SET-UP B Automatic registration is running. Please wait. The registration can take up to one minute.
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control Adding other types of io-homecontrol® controls to your system already operated with a VELUX INTEGRA® control pad KLR 200 1 4 7 The instructions below show how to copy the contents of control pad KLR 200 to another type of io-homecontrol® control. See also the instructions for the control in question. ¿ 2 5 8 0 3 6 9 # Note: Only available for VELUX INTEGRA® products with radio frequency 868 MHz.
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control Two-way controls 2 First execute items 1-4 with A . Tap 1 . 2 A A Tap "Copy control pad". 3 You now have two minutes to execute item 5 with B 4 Tap . Tap to finish. A A 5 Tap "New product". 1 4 7 ¿ 2 5 8 0 3 6 9 # B . See instructions for the io-homecontrol® control. You may also refer to the section Joint operation of io-homecontrol® products.
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control Adding a VELUX INTEGRA® control pad KLR 200 to your system already operated with another control "Control" is used as a generic term for all devices that can operate VELUX INTEGRA® products. To operate your VELUX INTEGRA® products with additional controls, the contents of the control already in use can be copied to your new control pad KLR 200.
VELUX INTEGRA® KLR 200 Setting up 3 Extension of your VELUX INTEGRA® system - Adding a control Adding a VELUX INTEGRA® control pad KLR 200 to your system already operated with a remote control KLR 100 The instructions below show how to copy the contents from the remote control KLR 100 already in use to control pad KLR 200. See also the instructions for the remote control. Remote control KLR 100 to send a copy is called control A . Control pad KLR 200 to receive a copy is called control B .