VSE/VCE KLR 100 User manual ENGLISH VAS 452672-2011-06
Contents Congratulations on your new VELUX product In order to make the best use of your product please read these instructions on operation and maintenance.
Display - Display light - Sleep mode Keypad lock Access code Software version Clearing remote control settings 52-53 52 53 54 55 56 57 Extending the system Registering new products Using additional activation controls - Copying to a new remote control - Copying to a remote control in operation - Adding products to a remote control in operation - Copying products to other types of activation controls Security key 58-59 61-65 62-63 64 65 66-67 68-69 Resetting Resetting and preparing for registration Reset
Important information / Warnings Please keep instructions for future reference and hand them over to any new user. Safety • Before operating ensure that the skylight with electrical products can be operated without risk of damage to property or injury to people or animals. • For personal safety, never have head, hand, arm or any other body part out of or through the opening of the skylight without first having switched off main power supply.
• This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Important information / Warnings Product • This product has been designed for use with genuine VELUX products. Connection to or use with other products may cause damage, malfunction or injury. • Electrical products must be disposed of in conformity with all local codes, ordinances, rules and regulations for electronic waste and not with household waste. • Used remote control batteries have to be disposed of in conformity with the relevant environmental regulations and ordinances.
VELUX 7
Initial set-up roducts to be operated with the remote control must be P registered in the remote control. Registration, however, depends on whether the remote control is new or whether it is already used for operating other products. 1 • I f the remote control is already in operation, proceed with section Registering new products. • If the remote control is new, proceed as follows. hen the initial set-up has been completed, the registered W products will appear in the display.
Auto set-up Prepare products for registration and press Register within 10 minutes Register 5 Press "Register" to start registration. Back P1 P2 Auto set-up 6 Registration is running. This can take up to two minutes. 7 he display shows "Completed" when all products have T been registered. Note: If the display shows "Failed", remove the batteries from the remote control. Prepare the products for registration, see section Resetting and preparing for registration. Repeat the initial set-up.
Remote control functions The display indicates which product is being operated, which menu function is being used etc. The top line of the display states the chosen area. Products are as default shown under the area House. The bottom line of the display states the function of the two selection keys. Note: The display shows the last product operated. The word "Window" is used for both windows and skylights.
Selection keys - for activating the menu and confirming the chosen menu function. - for locating the Room, the Group, the Zone or the product to be operated. The current function of the individual selection key is stated directly above in the display. House No. 1 Window Menu Locate P1 P2 P1 P2 P1 P2 Navigation keys - for scrolling up and down in the product or menu list. - for scrolling through the time intervals to set the remote control to close the skylight automatically.
Locating and operating a product To be able to operate a product (eg a roller shade), you first have to locate the product in question in the display. The examples show the easiest way to find the product you want to operate. One skylight With one electrical product The skylight (indicated as "Window" in the remote display) is equipped with a skylight operator only and therefore you do not have to locate the product first. Press to start operation. House No.
More than one skylight 1 2 3 With one electrical product House Three skylights are equipped with skylight operators only. No. 2 Window The example shows how to locate and open skylight No. 2. Press to find skylight No. 2 (indicated as "Window"). Press to open the skylight. Menu Locate P1 P2 Note: You can rearrange the order of the individual products, Groups, Rooms and Zones displayed, see section Rearranging order.
Locating and operating a product More than one skylight 1 2 3 4 5 With more than one electrical product One skylight is equipped with a skylight operator. In addition, all five skylights are each equipped with a roller shade. House No. 1 Window The example shows how to locate and operate roller shade No. 3 (indicated as "Blind"). 1 Press "Locate". Menu Locate House 2 isplays the list of product types within the area House.
Choosing positions A product or a Group of products can be set to travel to a certain position. The example shows how to set a roller shade to close by 50%. 1 ocate the product in question, see section Locating and L operating a product. House 2 roduct chosen is displayed. The example shows roller P shade No. 2 (indicated as "Blind"). No. 2 Blind Menu Locate Set position 50% down 3 ress and hold key P and watch the display.
Closing the skylight automatically When a skylight has been opened with the remote control, you can set it to close again automatically after a certain time. For instance you might want to air your house briefly when returning home. The possible settings are: Off, 5 min, 10 min, 15 min, 20 min, 30 min, 45 min and 60 min. he example shows how to time skylight No. 1 (indiT cated as "Window" in the remote display) to close after 10 minutes. House 1 2 ocate skylight No. 1 (indicated as "Window").
Disabling rain sensor I f the rain sensor gets wet, the skylight operator automatically closes the skylight within 30 seconds. I f you want to open the skylight even if it is raining, you must disable the rain sensor. When the rain sensor is disabled, the skylight can only open up to 50% of its normal opening distance and the rain sensor will be disabled for 60 minutes. he example shows how to open skylight No. 1 (indicated T as "Window" in the remote display) even if it is raining.
Menu guide Guide to the menu functions of the remote control. Additional information about the individual function is provided in the relevant section. House settings Room Group Rearrange order Rename Clear Enter House Menu Back User settings No. 1 Window Locate menu p. 24-27 p. 28-29 p. 34-35 p. 30-31 p. 57 Language Display Time and date Access code Keypad lock Favourite settings p. 22 p. 52-53 p. 20-21 p. 55 p. 54 p.
Navigating through the menus The example shows how to find the menu item Room by means of menu choices. 1 Press "Menu". House No. 1 Window Menu Locate P1 P2 menu 2 isplays a list of menu items under Menu. D to highlight "House settings". Press Press 3 "Enter" to confirm your choice. Displays a list of menu items under House settings. Press Press to highlight "Room". "Enter" to confirm your choice. ou can now proceed with the menu functions under menu Y item Room.
Time and date Time and date must be set the first time the remote control is to be used as correct settings are required for remote programming functions. Time must be changed manually at the start and end of Daylight Saving Time. The time and date format can be set in item 5 by choosing "Set format". The example shows how to set the time. The date is set correspondingly by choosing "Date" in item 4. 1 Press 2 Scroll through the menus: No. 1 Window Menu "Menu".
clock Set clock Set format Summer time 5 ress P Press to highlight "Set clock". "Enter" to confirm your choice. Enter Back P1 P2 Set Clock 9:00 am 6 ress P Press to set minutes. "Enter" to change to hours. Enter Back P1 P2 Set clock 11:00 am 7 ress P Press to set hours. "Enter" to confirm your settings. Enter Back P1 P2 Information Saved 11:00 am 8 The display shows that the new time has been saved.
Changing language You can change the display text language. The example shows how to change it into French. House No. 1 Window 1 Press 2 Scroll through the menus: "Menu". User settings Menu Locate P1 P2 Language language Dansk English Français Deutsch 3 he display shows a list of languages. The current lanT guage has been ticked. Enter Back P1 P2 language Dansk English Français Deutsch 4 ress P Press to highlight a new language. "Enter" to confirm your choice.
Room, Group and Zone To make it easier to locate and operate the products it is recommended to link each product to a Room and/or a Group. Products are as default shown under the area House. Room 1 Room 2 Definition of Room A Room consists of one or more products of any type located in the same physical room, eg bedroom or kitchen. A product can be assigned to one Room only. Room 1 Definition of Group Room 2 A Group consists of at least two products of the same type (eg two roller shades).
Creating a Room Rooms are created to make it easier to locate and operate your products. he example shows two rooms T with two skylights (indicated as "Window" in the remote display) in each. Below it is shown how to create Room 1 by moving the relevant products from House to Room 1. House House No. 1 Window Menu 1 Press 2 Scroll through the menus: "Menu". House settings Room Locate Create Product from 3 Displays the areas, here the area House.
5 House Window Displays the product chosen. • P ress "More" to move additional products to Room 1. You will return to the list in item 4. Repeat items 4-5 until the relevant products have been moved to Room 1. • Press "Continue" to proceed. No. 1 More Continue P1 P2 Continue 6 Save Room Undo product Undo new Room Displays a list of options. Press Press to highlight "Save Room". "Enter" to confirm your choice. Highlight one of the other options to undo your choice.
Editing a Room You can edit the Rooms you have created, ie one or more products can be moved from one Room to another. he example shows how the skylight operator in skylight T No. 1 (indicated as "Window" in the remote display) can be moved from Room 1 to Room 2. Room 1 No. 1 Window 1 Press 2 Scroll through the menus: "Menu". House settings Room Menu Locate P1 P2 Edit Move from 3 4 Displays a list of the Rooms created. Press to highlight the Room from which to move the product.
5 isplays a list of the individual products within the product D type in question. Press to highlight the product to be moved. The individual products can be identified by pressing for a short period of time. This will activate the product briefly. Press 6 "Enter" to confirm your choice. isplays a list of Rooms in which the product can be D placed. to highlight the Room in which to place the Press product. Press "Enter" to confirm the new location of the product. Window No. 1 No. 2 No.
Creating a Group To make it easier to locate and operate products of the same type simultaneously, you can create a Group. he example shows a room with four T skylights, each with a skylight operator. 2 1 It is shown how to create Group 1 consisting of the skylight operators on the two Room 1 skylights No. 3 and No. 4 (indicated as "Window" in the remote display). The example presupposes that Room 1 has been created.
5 isplays a list of the individual products within the product D type in question. to highlight the product to be included in Group 1. Press The individual products can be identified by pressing for a short period of time. This will activate the product briefly. Press 6 "Enter" to confirm your choice. he display asks whether to move additional products to T Group 1. Enter Back P1 P2 Information Add more to Group or save Group • P ress "More" to move additional products to Group 1.
Naming You can change the name of House and the names of the automatically numbered Rooms, Zones, Groups, products and Programs into more personal names. The example shows how to change Room 1 into Kitchen. ote: When you have used the function Rename, autoN matic renumbering is disabled. 1 Press 2 Scroll through the menus: "Menu". House settings Room 1 No. 1 Window Menu Locate P1 P2 Rename Rename 3 Displays a list with House, Room, Zone, Group and Product.
Dictionary 6 7 Displays a list of pre-defined locations. Press Press to highlight the relevant location. "Enter" to confirm your choice. ress P Press to highlight the save symbol . "Enter". Note: You can also create a new name by choosing and entering the relevant characters, one by one. After entering the last character, the new name is saved by highlighting the save symbol .
Favorite settings ou can appoint an area and/or a product or a Group of Y products as your favorite. Typically this will be the area or the product that is operated most often. If you have selected a product as your favorite, the display will as default return to this product whenever the remote control has been used. electing your favorite product S The example shows how to select skylight No. 2 (indicated as "Window" in the remote display) as your favorite product. No.
Deselecting your favorite product You can undo your choice of favorite product. he example shows how to deselect skylight No. 2 (indiT cated as "Window" in the remote display) as your favorite product. House No. 1 Window Menu 1 Press 2 Scroll through the menus: "Menu". User settings Favourite settings Favourite product Locate InformatiON Favourite product: House Window No. 2 Edit 3 Press 4 he display shows a list of all products in House.
Rearranging order ou can rearrange the order of the individual products, Y Groups, Rooms and Zones displayed. I n the example, three Rooms have been created. It shows how to rearrange the order of the roller shades (indicated as "Blind" in the remote display) in Room 2. Room 1 No. 1 Window Menu 1 Press 2 Scroll through the menus: 3 isplays a list of the Rooms created containing the prodD ucts in question. "Menu".
5 isplays a list of the individual products of the chosen D product type. The individual products can be identified by pressing for a short period of time. This will activate the product briefly. to highlight the product in question. Press Press "Enter" to confirm your choice. Rearrange order No. 1 No. 2 No. 3 Enter Back P1 P2 Rearrange order 6 7 No. 1 No. 3 No. 2 he list of the individual products of the chosen product T type is still displayed. to move the chosen product.
VELUX
Programs A program contains a sequence of commands on how and when the products are to be operated. There are two different program types: • M y program A personal program that will be activated automatically without using the remote control. For instance you can record a morning program to run up the roller shades in the bedroom and open the skylights between 7 and 7.15 am on weekdays from October to April. • S hortcut P1/P2 A personal program that can be activated by using the shortcut keys.
My program My program is an automatically activated program which contains a sequence of operating commands for one or more products. The sequence is automatically activated at a pre-set time within a period defined by a starting date and an end date. The example shows how to program skylight No. 1 (indicated as "Window" in the remote display) in Room 1 to open at 6.30 pm and close again at 6.45 pm each Monday for 12 months.
house Window 6 he display shows the selected product. T "Continue" to proceed. • Press • Press "Edit" to return to item 3 in case of additions or changes. No. 1 Continue Edit P1 P2 information Save selected products? 7 The display asks whether to save the selected product. Press "Yes" to save the selected product. Yes No P1 P2 Position Set position Save position 8 ress P Press to highlight "Set position". "Enter" to confirm your choice.
My program Set time 00:30 pm 11 ress P to set the time for the skylight to be opened. First choose minutes. Press "Enter" to change to hours. Enter Back P1 P2 Set time 6:30 pm 12 ress P Press to set hours. "Enter" to confirm your setting. Enter Back P1 P2 Set day 13 ress P to select the day of the week for the skylight to be opened. Press "Select". Monday Tuesday Wednesday Thursday Select Back P1 P2 Set day 14 Monday he display shows the chosen day of the week.
Save 16 The display shows various options. Press to highlight "Add functions" to set the closing position of the skylight plus the day and time for closing. Press "Enter" to confirm your choice. Save program Add functions Cancel recording Enter Back P1 P2 Room 1 Window 17 he display shows the latest selected product. T "Enter" to continue. Press Repeat items 8-16, only this time applied to the closing settings. No. 1 Enter Edit P1 P2 18 The display shows various options.
My program My program 1 he display asks whether to enable the program or to 20 Tkeep it disabled. Press Press to highlight "Enable". "Select" to confirm your choice. Enable Disable Select Back P1 P2 Set starting and end date to enable the program. Set date Starting date: 21 Press Press "Edit" to choose a starting date. "Enter" to confirm your setting. Starting date 2011.01.01 Enter Edit P1 P2 Set date End date 2011.12.31 End date: Press 22 Press "Edit" to choose an end date.
Choose "Enable" under menu item Program settings to get a full list of all recorded programs that can be activated automatically. The list comprises both enabled and disabled programs. The enabled programs have been ticked and the disabled programs can be enabled any time you want. Note: For solar products, automatically activated programs may result in a quick discharge of the battery due to frequent operation of the products.
Shortcut P1/P2 A program under Shortcut P1/P2 contains a sequence of operating commands for one or more products. The sequence is activated by pressing shortcut key P1 or P2. You can record up to eight programs, four under each of the shortcut keys. The programs can be set to be executed immediately, with a delay or at a certain time. he example shows how to program skylight No.
Room 1 Window 6 he display shows the selected product. T • Press "Continue" to proceed. • Press "Edit" to return to item 3 in case of additions or changes. No. 1 Continue Edit P1 P2 information Save selected products? 7 he display asks whether to save the selected product. T "Yes" to save the selected product. Press Yes No P1 P2 Position Set position Save position 8 ress P Press to highlight "Set position". "Enter" to confirm your choice.
Shortcut P1/P2 Time control 11 The display shows two time setting options. Press to highlight "Delay", ie the time that will pass from pressing P1 till the product will be activated. Press "Enter" to confirm your choice. Delay Starting time Enter Back P1 P2 set delay 12 ress P to set the relevant delay. First choose minutes. Choose 0 minutes if you want the window to open immediately. Press "Enter" to change to hours.
information Save selected products? 16 he display asks whether to save the selected product. T Press "Yes" to save the selected product. Yes No P1 P2 position Set position Save position 17 ress P Press to highlight "Set position". "Enter" to confirm your choice. Enter Back P1 P2 Set position 0% open ress to set the closing position of the skylight. 0% 18 Pcorresponds to fully closed. Press "Enter" to confirm your setting.
Shortcut P1/P2 set delay 00 h 30 min 21 ress P Press to set the delay. First choose minutes. "Enter" to change to hours. Enter Back P1 P2 set delay 01 h 30 min 22 ress P Press to set hours. "Enter" to confirm your setting. Enter Back P1 P2 23 The display shows various options. • Press to highlight "Add functions" to add additional operating commands for the skylight or other products to the program. Press "Enter" to return to item 15.
Information 25 The display shows that Shortcut 1 has been saved. 26 Shortcut 1 saved to Shortcut P1/P2 time and date heck current time and date settings to ensure accurate C operation of the products. The display shows day, date and time. "Keep" to confirm the settings. • Press • Press "Edit" to change day, date or time. Monday 2011.05.
Shortcut P1/P2 Activating a program under Shortcut P1/P2 ou can activate any one of the personal shortcut proY grams by pressing the shortcut key P1 or P2. You can still use the various functions of the remote control at the same time as one or more programs have been activated. elow four shortcut programs have been recorded under B shortcut key P1. The example shows how to activate the program Shortcut 3 via shortcut key P1. House 1 ress P1 three times to activate the program Shortcut 3.
Interrupting a program under Shortcut P1/P2 I con indicates that a program has been activated. A shortcut program in progress can be interrupted as follows: House No. 1 Window 1 Press P1 or P2 to find the shortcut program in progress. Menu Locate P1 P2 program 2 The activated shortcut program has been ticked. Press Press to highlight the program in question. "Stop" to interrupt the program.
Display Display light In standard settings, the light in the display is turned on when the keypad is activated and turned off again after 20 seconds. If you do not want any light in the display and you want to prolong the battery lifetime, you can opt out of this. House The example shows how to turn off the light in the display. No. 1 Window 1 Press 2 Scroll through the menus: Menu "Menu".
Sleep mode The life of the batteries can be prolonged by setting the remote control to go into sleep mode. When it has been set to go into sleep mode, the light in the display will be turned off 20 seconds after the latest key pressure. Time is shown. Press any key to activate the remote control again. However, a long press of the stop key will immediately stop all products in operation. House No. 1 Window The example shows how to set the remote control to go into sleep mode.
Keypad lock The keypad can be locked so that products cannot be operated without unlocking the keypad. The stop key can still be used. 1 Press 2 Scroll through the menus: "Menu". User settings House No. 1 Window Menu Locate P1 P2 Keypad lock Keypad lock 3 Disable Enable ress P to highlight "Enable". Press "Enter" to confirm your choice. The keypad lock is immediately activated. Enter Back P1 P2 Using the keypad even if it is locked: essage as shown. M "Menu". Press "Locate".
Access code You can choose a personal access code to protect your personal settings, for instance against unintentional deletion of programs. The access code must consist of four digits from 0 to 9. 1 Press 2 Scroll through the menus: 3 "Menu". User settings ress P Press House No. 1 Window Menu Locate P1 P2 Access code Access code to highlight "Select/Change". "Enter" to confirm your choice.
Software version When addressing technical inquiries to your VELUX sales company, you will be asked to provide the version number of the software in the remote control. To find this proceed as follows: Room 1 No. 1 Window 1 Press 2 Scroll through the menus: "Menu". System settings Menu Locate P1 P2 Software version software version 005.000.000.091 3 The display shows a code, for instance 005.XXX.XXX.XXX. The first three digits are the version number.
Clearing remote control settings When clearing the remote control settings, all personal settings for eg Rooms, Zones, Groups and Programs and all personal names are deleted. The products, however, remain registered in the remote control. Room 1 No. 1 Window Menu 1 Press 2 Select the submenu: "Menu". Locate P1 P2 House settings House settings 3 4 isplays a list of menu items. D to highlight "Clear". Press Press "Enter" to confirm your choice.
Registering new products When a new additional product has been installed, it can be registered in a remote control already in operation. This new product can for instance be another skylight, a Venetian blind or a roller shade. The example shows how to register a new roller shade (indicated as "Blind" in the remote display) in the remote control and place it in Room 1.
Now the product must be placed. 7a 7b I f no Rooms have been created, the product is automatically placed in House. Operation can start. I f Rooms have been created, the product has to be placed in the appropriate Room. The display shows a list of new products. The individual for a short products can be identified by pressing period of time. This will activate the product briefly. to highlight the product to be placed. Press Press "Enter" to confirm your choice. House No.
VELUX
Using additional activation controls Products and remote control settings can be copied from one remote control to another. Copying depends on the type of activation control and on whether the remote control to be copied to is new or already in operation. • C opying to a new remote control How to copy the contents from one remote control to another remote control not yet in operation.
Copying to a new remote control You can copy the contents from a remote control already in operation to a new one so that the latter can also operate the products already registered. The example shows how to copy the products and the personal settings from a remote control A in operation to a new remote control B not yet in operation. A Step 1: Prepare remote control A for copying B House No. 1 Window 1 Press 2 Select the submenu: "Menu".
Step 2: Register products in remote control B 4 I nsert the three batteries supplied (type AA, 1.5 volt) into the remote control as shown. B language 5 Choose language: ress P Press to highlight your language. "Enter" to confirm your choice. Eesti English Español Français Enter P1 P2 Auto set-up 6 ress P "Register" to start registration of each product. Please disregard the information in the display.
Copying to a remote control in operation If you have two remote controls with different products registered, you can copy the contents from one to the other so that the latter becomes an exact copy including all personal settings such as Names, Rooms and Groups. A Step 1: Change security key in remote controls A and B Change the security key in both remote controls so that they have the same key, see section Security key.
Adding products to a remote control in operation If you have two remote controls with different products registered, you can add the missing products in both. Then all products can be operated with one or both remote controls. The example shows how to add the products from remote control A to remote control B and at the same time maintain the settings and the programs of both remote controls.
Copying products to other types of activation controls You can copy one or more products registered in the remote control to another type of activation control. This other type of activation control can thus operate both its own and the copied products. The example shows how to copy a product from remote control A to control keypad B so that the latter can operate the products already registered plus the product from remote control A.
Step 2: Register the product in activation control B o copy a product to control keypad KLI 110, please refer T to section Configuring control keypad KLI 110 in addition to existing remote control KLR 100 in the instructions provided with the control keypad. B he product selected can now be operated with activation T control B.
Security key Each remote control and each product have a security key. To allow for communication between remote control and products, they must have the same security key. This also ensures that external activation controls cannot communicate with and thus operate the products unintentionally. he example shows how to change the security key in T remote control A and in the products registered in A (step 1).
A B House tep 2: Change security key in remote control B (and S others) No. 1 Window Menu 1 Press 2 Scroll through the menus: Locate "Menu". System settings Security key Security key 3 ress P Press to highlight "Receive". "Enter" to confirm your choice. The display indicates that the security key is being transferred from remote control A to remote control B.
Resetting and preparing for registration The skylight and all connected electrical products can be reset to remove the present registration and to prepare for a new registration. When resetting, the button located under the skylight operator cover hole closest to the center of the skylight (A) is operated by carefully inserting a pointed object. 1 o reset the skylight operator and connected electrical T products, close the sash by pressing button closest to the center of the skylight (A).
Resetting the remote control The remote control can be reset to its initial factory settings if you want to delete all registered products and all programming and start afresh. 1 Slide off the battery cover as shown. 2 ress the button on the right side of the remote control P with a pointed object for at least 5 seconds. 3 Replace the battery cover. Information 4 ress P "Yes" to confirm that you want to reset the remote control. The remote control will be reset.
Adjusting the maximum opening The skylight can be adjusted to three different maximum openings: 12" (300 mm), 8" (200 mm) and 4" (100 mm). Default is generally 12" (300 mm) but for specific skylights the maximum default opening may be 8" (200 mm). Note: For in-reach applications where the skylight is installed less than 8 ft. (2.5 m) from the floor, the default maximum opening must be 4" (100 mm).
4 5 hen the skylight is closed, press and hold the button W closest to the center of the skylight (A) for at least 5 seconds. The skylight operator and other electrical products connected to the skylight will run briefly back and forth indicating that they are ready to be registered. A min 5 sec o make a new registration and reinstate the conT nection with the remote control, please refer to the instructions in section Initial set-up or Registering new products.
Fitting of holder for remote control The remote control is provided with a wall-mounted holder, which can be fitted anywhere in your home. Note: Check that the remote control can operate the relevant products from the proposed position before it is fastened to the holder. 1 it the back section to the wall with the two screws supF plied. 2 ook the front section onto the back section at the top, H click it into place at the bottom and fix it with a screw.
If required, the remote control can be fastened with screws to the holder. 1 it the back section to the wall with the two screws supF plied. 2 lace the remote control in the front section. Clip the P white strap around the assembled unit. Hook the assembled unit to the back section at the top. Ensure that the strap fits into the openings in the sides of the back section. Lock the unit into place at the bottom. 3 Fix the unit with screw at the bottom.
Power failure / Mislaid remote control Closing skylights In case of power failure The chain can be disengaged by removing the plug in the center of the bottom sash and turning the screw, with the provided 2.5 mm hex key, counter-clockwise until it stops. Note: The chain can be re-engaged by executing the above procedure in reverse order.
Maintenance Switch off the main power supply before proceeding! 1 now and ice S Remove snow and ice to allow melted water to drain off from and around the skylight. 2 leaning the rain sensor C Dirt on the rain sensor may cause operating problems. Therefore, it is recommended to clean the rain sensor with a soft wet cloth once or twice a year or when needed.
Display symbols Batteries must be changed within 2 weeks (type AA, 1.5 volt). Automatic closing has been activated for the product in question. Automatic closing has been activated for one of the other products in the remote control. Automatic registration of product(s) is running. Note: In some cases, this might take up to several minutes. Operation of a product. The product or function requested has been ticked. A program has been activated.
Display texts / Glossary Display texts Adjustment: VELUX electrical decoration and sunscreening products are not adjusted to the skylight size on delivery. When operated the first time, they will therefore run from bottom to top of the skylight or vice versa without interruption. After adjustment the product is ready for use. Battery level low: The batteries in the remote control are running out of power. Blocked: Unknown object obstructs operation of product. Remove obstruction to obtain normal operation.
www.velux.com user manual for KLR. ©2010, 2011, VELUX Group ® V ELUX and the VELUX logo are registered trademarks used under licence by the VELUX Group CA: VELUX Canada Inc. 1 800 88-VELUX (888-3589) JP: VELUX-Japan Ltd. 0570-00-8145 US: VELUX America Inc.