VRP-1000 and VRP-1200 TM TM User's Manual Home Theater Subwoofer
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Caution To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The lighting flash with arrowhead symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Congratulations! Congratulations on your purchase of a Velodyne Rear Port (VRP) subwoofer system. This system represents the state-of-the-art in home audio reproduction and will provide you with years of listening pleasure when properly cared for. Read and follow this instruction manual to insure safe and proper system connection and operation. Caution! Please observe the following instructions to insure safe and proper system operation.
Signal sensing auto turn on/off Variable volume control Selectable phase control (0° or 180°) Frequency response of 36 - 120 Hz (+/-3 dB) Green power on/ Red power standby mode indicator LED ☞ • • • • • Prepare for Installation Your new Velodyne subwoofer provides for a number of installation options. Read all the installation information below in order to determine which installation option is best for your system.
monitors, as there is very little stray magnetism. Certain types of televisions are particularly sensitive to stray magnetic fields. If your television produces distorted colors after installing your subwoofer, simply increase the distance between your television and the subwoofer until normal color and operation is returned. Your new Velodyne subwoofer, like any good speaker system, requires proper positioning within the listening space to provide maximum performance.
Volume Control This control allows you to balance the output from the subwoofer to the main speakers/amplifier in your system. This control should be set to achieve similar output levels from both the main speakers and subwoofer when listening to music. A good starting point for the volume control is 2 or 3 graduations from minimum.
LOW-PASS CROSSOVER 80 Hz RED : STANDBY GREEN : ON 1 + SPEAKER LEVEL R L 4 50Hz + 200Hz SUBWOOFER VOLUME INPUT INPUT 5 R 2 PHASE OUTPUT 00 L 3 + R - - L MIN + 180 0 MAX LFE IN 4 ~ 8 Ohm 6 7 R C VRP Series CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN VELODYNE ACOUSTICS, INC. MORGAN HILL, CA. S T ED US (AUDIO APPARATUS) 68BM E203436 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
(5) Power indicator Red: Unit is in standby mode. Green: Unit is in operation mode. (automatically turns to STANDBY mode if no signal for 8 min.) (6) PHASE switch Select the switch position at which you hear a louder bass sound. (7) VOLUME LEVEL knob Use this knob to adjust the output level of the subwoofer. Crossovers Speaker-level Connections When installed in this fashion the satellite speakers will be crossed over at 80 Hz.
+ R - - L + SUBWOOFER OUTPUT JACK REAR AMPLIFIER FRONT LOW-PASS CROSSOVER 80 Hz RED : STANDBY GREEN : ON + SPEAKER LEVEL R L 50Hz + 200Hz SUBWOOFER VOLUME INPUT INPUT R PHASE OUTPUT 00 L + R - - L MIN + 4 ~ 8 Ohm 180 0 MAX LFE IN R C LI S T ED US LISTED VRP Series (AUDIO APPARATUS) 68BM E203436 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
☞ + R - - L + SUBWOOFER OUTPUT JACK REAR AMPLIFIER FRONT LOW-PASS CROSSOVER 80 Hz RED : STANDBY GREEN : ON + SPEAKER LEVEL R L 50Hz + 200Hz SUBWOOFER VOLUME INPUT INPUT R PHASE OUTPUT 00 L + R - - L MIN + 180 0 MAX LFE IN 4 ~ 8 Ohm R C LI S T ED US LISTED VRP Series (AUDIO APPARATUS) 68BM E203436 100Watt 120V ~ 60Hz 2A WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Interconnect Cables When installing your new Velodyne subwoofer using the line level connections, you should always use shielded phono cables. There are many high quality cables available today. It is recommended that you keep the length of cable as short as possible to avoid any potential noise problems. When using speaker level connections, use a high quality speaker cable that mates well with the connectors.
11 If either of the above should happen, you should reduce the volume setting or shut the unit off until normal operating conditions return. You may also want to plug the unit into a different wall outlet, as dropping power line voltage will be most noticeable under strenuous conditions and may result in the unit shutting down intermittently. Troubleshooting and Service If you should experience a problem with the operation of your subwoofer, please check all of the following before seeking service.
SPECIFICATIONS VRP-1000 VRP-1200 Cabinet Design Bass-reflex with built-in power amplifier Bass-reflex with built-in power amplifier Frequency response 35 Hz - 140 Hz (+/-3 dB) 29 Hz - 140 Hz (+/-3 dB) Crossover frequency 50 - 200 Hz (variable) 50 - 200 Hz (variable) Max. output power 195 watts Dynamic/ 130 watts RMS Power 165 watts Dynamic/ 115 watts RMS Power Phase Input impedance Sensitivity Speaker-Level Line Speaker Power Supply 0° or 180° 1.
FOR YOUR RECORDS. . . Date Puchased___________________________________ Dealer__________________________________________ Serial #_________________________________________ *NOTE: Please complete and return your warranty card within ten (10) days or Register. . . ON LINE . . . It's faster . . . and easier www.velodyne.
LIMITED WARRANTY VELODYNE ACOUSTICS, Inc. (“VELODYNE”) warrants all powered subwoofers for a period of two years, and full range speakers for a period of five years. All VELODYNE products have a warranty from the date of purchase against defects in materials and workmanship subject to the following conditions: 1. 2. 3. 4. 5.
“Not only was the little Velodyne the best small sub I’ve ever used, it was one of the very best subs I’ve used.” -John Potis SoundStage!, April 2002 Velodyne Acoustics, Inc. 345 Digital Drive Morgan Hill, CA 95037 408.465.2800 voice 408.779.9227 fax 408.779.9208 service fax www.velodyne.com Service e-mail: service@velodyne.com Product e-mail: help@velodyne.com Technical e-mail: techhelp@velodyne.com Printed on recycled paper.