REL VOL CD 1327 AF/ REG BAND ID3 ESP ENT PTY MODE -10 +10 INT/CHG EQ DISP A/PS SEARCH 1 2 3 4 5 6 TA
A 1 18 19 17 16 15 2 14 13 3 12 4 5 B 6 1 7 19 8 9 11 10 17 18 16 15 2 14 13 3 12 4 5 6 7 8 10 9 11 C RE SET 20 D F 15A AUX Ant.
E F 1 1 14 14 2 2 3 3 13 13 12 4 12 4 11 5 11 5 6 10 6 10 7 9 7 9 8 8 G H 1 188mm 2 3 58mm 4 I 4 1
J 2 A 2 B 1 1 K L M 5
INTRODUCTION Before Starting Thank you for purchasing this VDO Dayton product which has been designed and manufactured according to applicable Safety Regulations, following the highest standards and subjected to rigorous testing. Kindly familiarise yourself with the product by reading this user manual carefully. Use the product as intended, and keep this manual handy in your car for future reference. Environment This booklet is printed on low-chlorine recyclable paper.
GENERAL INFORMATION Disclaimer Designs and specifications are subject to changes without prior notice. Class 1 Laser Product z If there are earth connections on the chassis, insert toothed washers. Remove paint and dirt first, if necessary. z Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
z CD Mixed Mode (in accordance with Light Yellow Book); Only the audio tracks are played. z CD-Extra; Only the audio tracks are played. z Multi-session CD (in accordance with multisession CD specification 1.0) Notes on MP3 files The following MP3 files are supported by the CD player: z Files conform with MPEG1/2 or 2.5-Layer 3. z Up to 345 titles in up to 99 directories (each data name with 32 characters). z Bit rate: Maximum of 320 kbit/s, constant or variable.
Notes on Folders z An outline of a CD-ROM with MP3 files on it is shown below. Sub folders are shown as folders in the folder currently selected. 01 (ROOT) 02 (001.mp3) (010.mp3) 03 Important z Never use force or grip the display and the buttons too tightly when removing or attaching. z Avoid subjecting the front panel to excessive shocks. z Keep the front panel out of direct sunlight and high temperatures.
Cleaning the unit Do not clean using cleaning fluid, alcohol or other solvents. Use only a damp cloth. CD-R/CD-RW discs z When CD-R/CD-RW discs are used, playback is possible only for discs which have been finalized. z It may not be possible to play back CD-R/CDRW discs recorded on a music CD recorder or a personal computer because of disc characteristics, scratches or dirt on the disc, or dirt, condensation, etc., on the lens of this unit.
Connecting 4 loudspeakers Side & pol. Front/colour Pin Left (+) Left (-) Right (+) Right (-) 1 Green [B5] Green/black [B6] Grey [B3] Grey/black [B4] Rear Mounting Rear/colour Pin White White/black Blue Blue/black [B7] [B8] [B1] [B2] ) For this accessory, contact your dealer. Line out You can connect a power amplifier with 2 or 4 additional loudspeakers to this set using the labelled RCA cable. z Red socket to right channel z White socket to left channel.
4. 12. 5. SEL MENU Mute/demute audio level Short press the knob to select the modes in the following sequence: VOLUME>BASS> TREBLE>BALANCE> FADER. Long press the knob to select the modes in the following sequence: TA SEEK / AALARM> MASK DPI / MASK ALL> PI SOUND / PI MUTE> RETUNE L / RETUNE S.> TA VOL+/- > DSP ON / OFF> ESP ON / OFF> LOUD ON / OFF SEEK1 / SEEK2> STERO / MONO> DX / LOCAL> VOL LAST / VOL ADITION 6. VOL 13. 7. 6. Toggle sound equalization 8. 5. Toggle the display modes 9. 4.
Note 3: Do not touch the electrical contacts when removing or replacing the front panel! GENERAL OPERATION Switching On/Off Press button to switch the set on or off. Setting the Start-up Volume VOL LAST or VOL ADJ mode In this mode the start-up volume can be set the radio will have when it is switched on. 1. Long press the SEL MENU knob to select the special functions mode. 2. Turn the VOL knob to VOL LAST to set the radio to store the volume as it was when the radio was turned off, or 3.
4. Turn the volume knob either to the left or right to set the MINUTES. 5. Press the DISP button to store the current setting. The time has been set now. Preset Scan RADIO OPERATION Displaying time or frequency 1. Press the button to switch the set on. If the set is not in RADIO mode: 2. Press the SEL MENU knob to select RADIO. Note: The set must be in radio mode. 1. Press the DISP button to toggle between the actual time and the frequency of the section selected.
Traffic Announcements (TA) MASK DPI or MASK ALL mode You can activate the TA mode to give priority to hear announcements related to these subjects (even if you do not listen to the radio). This function is only available with RDS on. MASK DPI Activate/deactivate TA Press TA button to activate/deactivate TA. When traffic announcement is selected and information is received TP appears in the display.
TA VOL+/- mode DX/LOCAL With this option the volume for Traffic Announcements can be preset to the required level. 1. Long press the SEL MENU knob. 2. Turn the VOL knob to select the TA VOL mode. 3. Then turn the VOL knob clockwise to set volume “louder” and counter-clockwise “softer” depending on your requirements. Via this mode selection you can determine the threshold for radio station search. To only receive local radio stations with high transmitting power select the mode LOCAL.
Loading CD in the CD player 1. Press the button to switch the set on. 2. Press REL button to open the front. 3. Insert the CD (label facing up) into the CD slot. When a disk is loaded it will be played automatically. Note: If a CD does not automatically load, DO NOT FORCE it into the slot, this could damage the CD and the set. 4. Close the front. Displaying playback time In CD/MP3 mode the playback time can be displayed. 1.
Select a Track or File Root Search for Directories 1. Long press the SCH A/PS button. 2. Use the VOL knob (radio) or buttons (remote control) to select the desired track or file. 3. Long press the ENTER button to play the selected track or file. 1. Press the SCH/A/PS/ button three times. ROOT/ will appear in the display. 2. Turn the VOL knob to select the directory. 3. Press the BAND/ENT button to playback the first song in the selected directory. Pausing Interrupt play Radio: 1.
TROUBLESHOOTING SOUND TROUBLE Verify: May be, it will happen that your car radio will not functioning as you expected it to. Before calling for service, please read this user manual and review carefully the setting values: you may find that a function cannot work properly with the value, you defined. Nevertheless, if you need to send your set for reparation, always send it complete with detachable front (do not try to open the car radio to service it yourself).
