Installation Guide

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

Y0009 / Y0010

181024

Lock Nut (E)

Ball Nut (G)

House Grounding Wire

Wire Connector (F)

Fixture Grounding Wire (D)

Mounting Plate (A)

Green Grounding Screw (C)

Mounting Screw (B)

Grounding Wire (K)

Outlet Box

Anchor (I)

Black Wire (J)

Dry Wall Screw (H)

Fixture Mounting Screw

White Wire (J)

Lock Nut (E)

Mounting Screw (B)

Wire Connector (F)

Ball Nut (G)

Mounting Plate (A)

Green Grounding

Screw (C)

Fixture Mounting Screw (D)

Hardware Package (included):

Dry Wall Screw (H) Anchor (I) White / Black Wire (J) Grounding Wire (K) Flat Headscrew Driver (L)

Remove the canopy from the fixture

befor installation

Figure.2

Canopy

Fixture

Finial

Canopy

Figure.1

Fixture

Remove the canopy from the fixture

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS Y0009 / Y0010 WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Figure.3 Canopy Finial Cord clamp Remove the canopy from the fixture before installation Flat HeadScrew driver Installation Steps Turn off the power at fuse or circuit box. 1. Carefully unpack the fixture, lay out the fixture on a clean surface. 2. Attach the mounting plate by using mounting screw to the outlet box, and secure it to the celling with dry wall screws and anchors. Support Brace 3. Attach the fixture mounting screws and lock nuts to the mounting plate, then secure it with ball nuts.
PAGE 3
The following parts are available for re-order if damaged or missing.