VA-LT002 www.vava.com NORTH AMERICA US Distributo r: SUNVALLEYTEK INTERNATIONAL INC. Address: 46724 Lakeview Blvd, Fremont, CA 94538 E-mail: support@vava.com Tel: 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST) EUROPE EU Importer: ZBT International Trading GmbH Address: Halstenbeker Weg 98C, 25462 Rellingen, Deutschland E-mail: europe@sunvalley-group.de ASIA PACIFIC JP Importer: 株式会社SUNVALLEY JAPAN Address: 〒104-0032東京都中央区八丁堀３丁目18-6 PMO京橋東９F E-mail: support.jp@sunvalley.co.
CONTENTS 01/02 English Deutsch 03/04 Français 05/06 Español Italiano 日本語 07/08 09/10 11/12
EN PACKAGE CONTENTS CONTENTS PACKAGE CONTENTS PRODUCT DIAGRAM PROJECTOR REMOTE CONTROL QUICK INSTALLATION GUIDE PREPARATION INSTALLING THE PROJECTOR FUNCTIONS 1. MOTION DETECTION 2. MULTI-SCREEN PROJECTION 3. 3D FUNCTION 4. HDR10 5. DOLBY AND DTS DECODING 6. TEMPERATURE PROTECTION OPERATION GUIDE 1. POWER ON/OFF 2. POSITION ADJUSTMENT 3. USER INTERFACE OVERVIEW 4. CONNECTION WITH PERIPHERALS 5. FILE MANAGEMENT 6. SEARCHING FOR / INSTALLING / DELETING APPS 7. PAIRING VIA BLUETOOTH 8. NETWORK SETTING 9.
Back / Bottom PRODUCT DIAGRAM 8 PROJECTOR 9 10 11 12 13 14 15 8. HDMI Input 1 9. HDMI Input 2 10. HDMI 3 ARC 11. USB Port 12. Audio Output Front / Top 5 2 16 13. AV Input 17 3 18 14. S/PDIF Port 15. Ethernet Port 16. Power Port 17. Rear Foot 18. Speaker Air Vents 19. Front Foot x 2 When front feet are at the lowest, the three feet are in parallel with each other.
QUICK INSTALLATION GUIDE Projection Distance & Image Dimensions PREPARATION Take the following 4 items into consideration when installing the projector . 1) Distance between the projector back and the wall (W1) 2) Heights: image width (height) (H1), height between the bottom of the image and the desk (H2), height of the desk (H3), and the recommended height of the wall (H4) 3) Surface for placing the projector You can place the projector on almost any sturdy, flat and level surface (here a desk e.g.
Take 100" image (immobile desk) for example. INSTALLING THE PROJECTOR 1) Distance (W1): 18.2cm / 7.2in. 2) Heights: H1: 124.5cm / 49.0in; H2: 30.8cm / 12.1in; H3: 37.0cm / 14.6in (thus the image center is at 1.3m / 51.2in high, suitable for audience sitting on a sofa in front); H4: ≥ 192.3cm / 75.7in. 3) Area of the desk (L2 x W2): ≥53.3 x 55cm / 21.0 x 21.7in. 4) Area for the wall (L3 x H4): ≥221.4 x 192.3 cm / 87.2 x 75.7in.
FUNCTIONS 5. DOLBY AND DTS DECODING 1. MOTION DETECTION The projector supports Dolby and DTS (dedicated to sound) decoding, perfect for a home theater. There are two PIR motion sensors at the front of the projector; when it detects human approaching, the projector will lower the brightness of the laser light in case of any harm to our eyes. This function is active by default and can be disabled in the Settings –>General.
OPERATION GUIDE 3. USER INTERFACE OVERVIEW 1. POWER ON/OFF There are mainly 4 sections on the homepage, including the followings: signal source (HDMI & AV), App Store, File Manager, and Multi Screen. On top you can see the Network, Notification, Bluetooth, and Settings icons as well as the time. Connect the projector to power, press the Power button on the projector or the remote to power it off / on. 2.
2) Selecting audio output On the homepage, go through Settings -> Sound, and select the corresponding output method among the following 4 ones in Audio Output . - Speaker: Use the built-in speaker - Headphone: Connect to headphones - S/PDIF: Connect to external audio device by S/PDIF port PCM: All formats will be converted to PCM for output. RAW: No processing for the source audio. Recommended for Dolby and DTS sources for better performance.
7. PAIRING VIA BLUETOOTH 8. NETWORK SETTING Select the Bluetooth icon at the top right corner to enter the Bluetooth interface. Select the Network icon at the top right corner to enter the network setting interface. For wired connection, just plug in the Ethernet cable. For the wireless, find the network name on the drop-down list, select, and type in the password to connect. It supports network anomaly detection. 1) The Show Password option cannot be selected when the keyboard is shown.
9. SYSTEM UPGRADE 1) OTA (on the air) update Select Settings -> General -> System Version, select Version Update if any prompt. 2) Upgrade by USB drive Select Settings -> General -> USB Disk Upgrade, go to Select, and find and choose the upgrade file on the USB drive, and then select Update. Select the Wipe Data (system-related settings) or / and Wipe Media (files like audio, video, and app) to clear the data or / and media files on the device if needed.
4) Electric focus Adjust the focus by the Left / Right button on the remote to get the clearest image on the interface. 11. PLAYBACK SETTINGS When playing videos, press the Menu button to prompt a sidebar menu, including the followings: Video ratio, Sound track, Subtitle, Playback settings, Cycle mode, and Dolby. SPECIFICATIONS Projection System Display Type DLP Light Source Laser (ALPD3.0) Laser Safety Class Class 1 Throw Rate 0.
Bluetooth Out Yes (Connect with Bluetooth speaker) DTS Yes Dolby Yes Interfaces HDMI 3 ports (HDCP2.2, 1 with ARC) USB 1 Video In AV3.5 Audio Out Line out 1 (3.5mm) and S/PDIF 1 RJ45 1 Connectivity Internet Wired and wireless (802.11ac 2.4G / 5G 2T2R, with DFS) Bluetooth BT4.2 (dual mode) Power Input 100-240V, 50/60Hz Power Consumption <360W StandbyPowerConsumption <0.5W Others Dimensions 533 x 368 x 107mm / 21.0 x 14.5 x 4.2in Weight 10.
FAQ Question Answer For its beautiful color, high brightness, and long Benefits of laser light source? life. Advanced laser-powered phosphor display (ALPD) is a large-format display technology and the critical technology for laser display.
TROUBLESHOOTING Problem Solution The device cannot show image or Power off the device, unplug the power cord. Plug there’s an anomaly. it again after 1min and power on the device. Power off the device, unplug the power cord. Plug Android system just broke down. it again after 1min and power on the device. Power off the device, unplug the power cord. Plug Remote control got disconnected; it again after 1min and power on the device with or cannot power on the device the button on the device.
FCC Compliance Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
