Quick Start Guide

ManualsBrandsVAVA ManualsElectronicsIPC for Home Cam

VAVA Home Cam

Quick Start Guide

VA-HS002

www.vava.com

E-mail: support@vava.com

Tel: 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST)

Address: 46724 Lakeview Blvd, Fremont, CA 94538

NORTH AMERICA

EUROPE

E-mail:

support.uk@vava.com(UK)

support.de@vava.com(DE)

support.fr@vava.com(FR)

support.es@vava.com(ES)

support.it@vava.com(IT)

EU Importer: ZBT International Trading GmbH, Halstenbeker Weg 98C,

25462 Rellingen, Deutschland

ASIA PACIFIC

E-mail: support.jp@vava.com(JP)

JP Importer: 株式会社SUNVALLEYJAPAN

Address: 〒104-0032東京都中央区八丁堀３丁目18-6PMO京橋東９F

MANUFACTURER

Shenzhen NearbyExpress Technology Development Co.,Ltd.

Address: 333 Bulong Road, Shenzhen, China, 518129

MADE IN CHINA

Summary of content (8 pages)

PAGE 1
VA-HS002 www.vava.com NORTH AMERICA E-mail: support@vava.com Tel: 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST) Address: 46724 Lakeview Blvd, Fremont, CA 94538 EUROPE E-mail: support.uk@vava.com(UK) support.de@vava.com(DE) support.fr@vava.com(FR) support.es@vava.com(ES) support.it@vava.com(IT) EU Importer: ZBT International Trading GmbH, Halstenbeker Weg 98C, 25462 Rellingen, Deutschland ASIA PACIFIC E-mail: support.jp@vava.
PAGE 2
What’s in the Box Camera Base Station Ethernet Cable Camera Power Adapter USB Charging Cable Base Station Power Adapter Magnetic Wall Mount Mounting Screws & Anchors Desktop Mount VAVA HOME CAM Quick Start Guide Stand Mount Quick Start Guide
PAGE 3
Product Diagram Base Station ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ Speaker USB Port Reset Button LED Indicator Power Port Sync Button Micro SD Card Slot Ethernet Port Camera 1 Lens 2 Light Sensor 3 PIR Motion Sensor 4 LED Indicator 5 Microphone 6 Speaker 7 Reset Button 8 Sync Button 9 Micro USB Charging Port 10 Mount Port 11 Magnetic Mount 12 Desktop Mount 13 Stand Mount 1 2 5 3 4 7 6 8 9 10 11 13 12 01/02
PAGE 4
Get Started Connect Your Base Station 1. Insert the TF card into the base station. Note: The LED indicator on the base station will keep flashing red when connecting to the internet and turn solid white once successfully connected. Charge the Camera Please fully charge the camera before use to ensure longer working time. Micro USB Charging Port 2. Connect the base station to your router with the included Ethernet cable. Turn on the Camera Press the Sync Button on the camera to turn it on.
PAGE 5
Mount Your Camera On the Stand Mount Install the camera on a shelf, wall, or any flat surface with our complete mounting set. On the wall Fasten the mounting screws into the wall and attach the magnetic mount. When you are mounting the camera to drywall, be sure to use the plastic anchors.
PAGE 6
On a desktop or a shelf Specifications Camera Lens Sensor Resolution Night View Microphone Speaker PIR Detection Battery Power Consumption in Standby Mode Adapter Power Internet Weather Proof Dimensions Working Environment 140°Wide Angle, f / 2.2 IMX323, 1 / 2.9 inch 1080p 2 x 850nm Infrared Light, Effective Range: 8m / 26.2ft Built-In 1.5W, 8Ω Detection Angle 110°, Effective Range: 7m / 23.0ft 2500mAh Polymer Battery, 7.68V ≤4mW 5V / 1.8A 2.4G Wi-Fi, Effective Range 60m / 197.0ft (empty space) IP66 80.
PAGE 7
Base Station Button Controls Camera Button Sync Button Function Turn on the camera Pair with the base station Turn off the camera Reset Button Reboot the camera Operation Press once Press and hold for 5 seconds to enter pairing mode with the LED indicator flashing blue slowly Press and hold for around 10 seconds Press once to reboot the camera without losing any data Note: The Sync Button is not functional during firmware upgrading.
PAGE 8
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC STATEMENT: This device complies with Part 15 of the FCC Rules.