Battery Maintenance [CE CEC ECT ET Testing the Battery Power First time users should change the default code as soon as possible to prevent unauthorized access to your safe. To check the battery level, press and hold '6' and '8' key together on the keypad for 3 seconds. TIP: Code Requirements Low Battery Your code can be a minimum of 4 and a maximum « Two keys cannot be pressed simultaneously. of 8 digits.
mart LUT] Bio metric Scanner Continue on next page for more information about the fingerprint scanner. Bio metrics are methods of authenticating the identity of a person based on physical or behavioral Program g the 1st and 2nd fingerprints characteristics. Bio metric fingerprint authentication refers to technology that measures and analyzes human physical characteristics for identification and authentication purposes.
Te | p ing Additional Fi nits 3-20 Deleting Fi : The first two fingerprints programmed into the safe are the administrative fingerprints. Any additional users Individual fingerprints can not be deleted from the keypad on the safe. Following this procedure will erase all of programmed require authorization from one of these fingerprints. the fingerprints including both administrative fingerprints. If you wish to delete individual fingerprints, you must the Vaultek® Wi-Fi® line dashboard.
Smart Key Operation Continue on next page for more information about Smart Key. Your Vaultek® safe supports quick access with the included Smart Key Nona. Take caution when using this Toggle Smart Key Entry Modes feature and be responsible. Security can be compromised in the event it is lost or stolen. Only pair Smart Key after thoroughly understanding the inherent risks. After pairing you can toggle between access modes from the keypad, Wi-Fi® smartphone app, or the online Web Dashboard.
Smart Key Operation Multiple Safe Management A Multiple safes can pair with the same Smart Key, but multiple Smart Keys can not pair with the same safe. B Recommended setting when using the Smart Key is Progressive entry mode. € Additionally, you can manage multiple safes through the Vaultek® Wi-Fi® smartphone app and Web Dashboard. CAUTION when managing multiple safes in On Demand entry mode there is a chance you can open all safes within range.
Toggle Open Door Alarm Press and hold '3' and '5' View Battery Status Press and hold '6' and '8' Delete Fingerprints Press and hold '3' then "PROGRAM" button then enter master code Toggle Interior Light Press and hold '5'and '7' Toggle LCD Brightness Press and hold '5'and '8' View Temperature/ Humidity Press and hold '2' and '5' 17 Vaultek® Your safe features an open door alarm that will sound when the safe door is left open for more than 6 minutes. By default, this alarm is ON.