Battery Maintenance: Testing the Power To check the battery level, press and hold the '6' and '8' key together on the keypad for 3 seconds.
Bio metrics are methods of authenticating the identity of a person based on physical or behavioral characteristics. Bio metric fingerprint authentication refers to technology that measures and analyzes human physical characteristics for identification and authentication purposes. Everyone has their own unique fingerprints, and what makes them unique is the pattern of ridges, valleys, and minutiae points that comprise an individual print.
The first two fingerprints programmed into the safe are the administrative fingerprints. Any additional users programmed require authorization from one of these fingerprints. 1 Open the safe. Program additional fingerprints by pressing and holding the '2' key then "PROGRAM" button together (3 seconds) (Figure H and H.1 on page 10). The entire status bar will blink RED prompting you to scan one of the administrative fingerprints.
Your VaultekĀ® safe supports quick access with the included Smart Key Nona. Take caution when using this feature and be responsible. Security can be compromised in the event it is lost or stolen. Only pair Nona Key after thoroughly understanding the inherent Asks. Refer to page 16 for Nona Key warnings. IMPORTANT! Before you can pair the Nona Key to your safe connect the per-installed battery by removing the pull tab from the side of Nona Key (Figure I).
Nona Key: Open Your Safe You must be approximately 5-8 feet before pressing the enter button. If you are using PROGRESSIVE ENTRY mode, you will need to awaken the safe first. Simply brush your hand across the keypad to illuminate the keys and then press the enter button on your Nona Key to open your safe. Nona Key: Multiple Safe Management Multiple Nona Keys can not pair with the same safe. It is recommended to pair one Nona Key per safe.