Battery Status Press and hold '6' and '8' Travel Mode Press and hold '1' and '8' Interior Light Press and hold '5'and '7' Open Door Alarm Press and hold '3' and '5' then "PROGRAM" together Impact Detection (DMT) Press and hold '7* then "PROGRAM" together 17 Vaultek® To check battery level press and hold keys '6' and '8' together 3 seconds. The status bar will glow GREEN or RED to indicate the battery level. See page 07 for more information.
Your Vaultek® safe can be secured a few different ways. Included is a security cable to attach your safe to larger Vaultek® strongly encourages you to register your safe as soon as you receive it. Registration stationary objects. There are also mounting screws included to mount the safe to a flat surface using the provides many benefits including three year warranty, technical support, and ordering per-drilled holes on the bottom. replacement Keys should you misplace them.
If you have any questions about your Vaultek® MX Series safe or need help configuring the system, please visit and or email our support team at Battery Can | keep the safe plugged in at all times? Leaving your safe plugged in continually will not harm the safe or battery. However, to preserve the battery life we suggest that you unplug occasionally to allow the battery to cycle down.
If you experience any issues with your safe, try the following solutions. Nona Key is not working. After pairing you need to assign an entry mode. Refer to Enable Nona Key on page 13. After Nona Key is paired you need to assign to either On Demand or Progressive entry mode, otherwise Nona Key will disable after pairing. Fingerprint scanner works sometimes and not others. (Bio metric Model Only) We have a few suggestions to help improve the success rate on page 09. Lid is not engaging.
This device has been evaluated to meet general RF exposure requirement, and this device can be used in fixed exposure condition without restriction. This device shall be used with a minimum separation distance of 20 cm from the human body. FCC statements: This device complies with part 15 of the FCC rules.