Specifications

ManualsBrandsVarex Imaging ManualsElectronics802.11ac/a/b/g/n 2T2R Wifi + Bluetooth 4.2 USB Module

100097489

Series

Brand name: Varex Imaging Corporation

Model name: WUBT-236ACN(BT)[MN]

802.11ac/a/n 2T2R Wifi USB Module

Varex Imaging Corporation WUBT-236ACN(BT)[MN] is a highly integrated single-chip Wireless LAN (WLAN).

It is integrated 2T2R WLAN MAC, baseband, and dual band RF in a single chip. WUBT-236ACN(BT)[MN]

provides a cost effective solution for M2M (machine to machine) connectivity product/device by one USB

port, it can be easily integrated into the most familiar operation system (Android/Linux/Windows). .

802.11ac/a/n 2T2R Wifi USB Module with various USB input format & internal printing or external RF

antenna connector for high performance wireless LAN device. It is designed to provide completely M2M

connection & excellent cost performance with low power consumption and enhance the advantages of

robust system & applications.

Support Multiple Operation Systems (Android/Linux/Windows)

Key Feature

● 802.11ac/a/an Wi-F

● Support 802.11ac 2x2, compliant with MU-MIMO

● Maximum data rates:

300Mbps in 802.11n, 866.7Mbps in 802.11ac.

Embedded Application

Applications include portable handheld devices,

thin client computer, medical devices, network

security & monitoring, 3D printer, TV, STB, POS,

digital signs, gaming machine, robotic machinery,

industrial tablets, etc.

Summary of content (8 pages)

PAGE 1
Brand name: Varex Imaging Corporation Model name: WUBT-236ACN(BT)[MN] 802.11ac/a/n 2T2R Wifi USB Module Support Multiple Operation Systems (Android/Linux/Windows) Varex Imaging Corporation WUBT-236ACN(BT)[MN] is a highly integrated single-chip Wireless LAN (WLAN). It is integrated 2T2R WLAN MAC, baseband, and dual band RF in a single chip.
PAGE 2
Specification Standards IEEE 802.11ac/a /an(2T2R) Chipset Realtek RTL8822BU-CG 802.11a:54Mbps Data Rate 802.11n:MCS0~15 802.11ac: MCS0~9 FCC & IC: 5.15-5.25 GHz, 5.725-5.85 GHz Operating Frequency Japan: 5.15-5.25 GHz *Subject to local regulations Interface WLAN: USB Antenna ANT0 for WLAN 11a only, ANT0+ ANT1 for WLAN 11 an/ac Wi-Fi : 802.11n: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) Modulation 802.11a: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) 802.
PAGE 3
Block Diagram Pin Description Pin_1 USB 5V Pin_2 USB D- Pin_3 USB D+ Pin_4 USB GND LED WiFi LED Ant_0 RF Antenna for WLAN 11a Ant_0 + Ant_1 RF Antenna for WLAN 11 an/ac 100097489 Series
PAGE 4
Federal Communication Commission Interference Statement: Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
PAGE 5
described in the user documentation that comes with the product. We will retain control over the final installation of the modular such that compliance of the end product is assured. In such cases, an operating condition on the limit modular approval for the module must be only approved for use when installed in devices produced by a specific manufacturer.
PAGE 6
Caution: 1) The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 2) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p.
PAGE 7
This radio transmitter (IC: 9909A-UBT236ACNBT has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
PAGE 8
Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module.