VPIXEL Phantom Wireless audio and video transceiver system User Quick Guide
1.
2.
3. Instruction of Usage 3.1. Install the adaptor Select the corresponding adaptor according to the connection port requirement, and install the adaptor to the Vpixel_S and Vpixel_R respectively. Picture3-1Install the connector Comments: 1.No mixed use of Vpixel_S adaptor and Vpixel_R adaptor,Vpixel_S adaptor is circle in orange,Vpixel_R adaptor is circle in blue. 2. Via choosing different adaptors to match HDMI、VGA、DP or Mini DP interface. 3.2. Connect Device 1.
Picture3-2connect computer 2. Vpixel_S via Lightning Digital AV Adapter connect lightning interface,achieving wireless display to iPhone or iPad devices.(Lightning Digital AV Adapter is Apple's official accessory,it needs an extra purchase.
3.3. Connect power source 1. Supply power to Vpixel_S and Vpixel_R via installing battery, and the battery can be used by multiple stacking because of its modular design. Picture3-4 install battery 2. Battery needs to be taked out and to be charged. Also, it can be multiple stacking charged. There is no charging while the battery is working.
3. Connecting to the power adapter, it can supply power to the Vpixel_S and Vpixel_R as well. Picture 3-6connect power adaptor Comment: The power supply capacity of the USB interface equipment such as projector/hd can't meet the demand of VPIXEL phantom main equipment, so please do not connect the power cord to the USB interface, and use the power adapter to meet the requirement of power supply. 3.4.
4. More functions 4.1. Lock and Switch screen The lock screen function can be enabled by pressing the lock screen button when the equipment works normally. At the same time, "Locked Screen" will be shown on the display screen. To restore the normal display by pressing the lock button again. This product supports the multi-user scenarios that a Vpixel_R works with the several Vpixel_S.
4.3. Match All the products are matched in set in our factory. It needs a matching operation only if you purchase a launcher separately or need to change the match status of the products. You can accomplish the matching operation by following the procedures below. Starting up and execute the matching. First aim the Vpixel_S infrared window at the Vpixel_R infrared window, and long press the "switch key" for 3 seconds.
Picture4-1connect to android phone Comments: 1. The Android version must be above 4.4 and it must have a Miracast function and support 5G Wi-Fi frequency range. 2. If the effect of the mobile projection screen is not good enough, please disconnect all automatic Wi-Fi and try again.
There are differences names of wireless display function between the different mobile phones. The common names such as: Multi-screen interaction, Miracast, WIFI Display, WLAN Display, Wireless Display, Allshare Display, Allshare Cast, WIFI direct connect, Share screen, Media output、Screen Mirror, etc. Attachment: Common mobile phone brand wireless display function set path (for reference) No.
5.
6. Q&A Q1:No display on the display terminal? A: Please check whether the Vpixel_R battery is power on or whether the power adapter is well connected. Please check whether the Vpixel_R adapter is the proper one, and the display connects fine. Check if the display source has been switched to the correct display mode (HDMI or VGA mode, etc.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.