User Dual Dash Cam Manual OnDash N2 Pro
Hey, find us here: www.vantrue.net/contact Always a surprise in Vantrue -1- f facebook.com/vantrue.
VERZEICHNIS 1. What’s in the box? Was ist in der Box? ボックスに何が入っていますか? 3 26 51 2. Camera Overview Die Übersicht über Kamera ドラレコの概要 4 27 52 3. Getting Started Vorbereitung vor dem Einschalten 入門 5 29 54 4. Basic Operation Grundlegende Operation 基本操作 9 33 58 5. Specifications Spezifikationen 製品仕様 24 48 72 6.
1. What’s in the box? A C D B E F G A. Dual Car Charger with Built-in Mini USB Cable (10ft) E. N2 Pro Dual Dash Cam User Manual B. VANTRUE® N2 Pro Dual Dash Cam F. Quick Start Guide C. Suction Cup Mount G. Warranty Card D.
2. Camera Overview 1 8 4 5 2 6 9 3 10 11 12 13 7 15 16 17 NO. Name Description 1 Mount Connector Connects to the Suction Cup Mount. 2 Front Camera Lens Front Facing Camera for video recording road events. 3 Speaker Delivers sound during video playback. 4 5 Power Button Up Button Power ON/OFF; IR LED Light Switch. Move selector up; rewind; Microphone on/off. 6 Down Button Move selector down; fast forward; Turn off LCD screen. 7 Menu Button Enter/exit setup menu.
12 IR LED Lights 13 Rear Camera Lens 14 Mini USB Port 15 HDMI Port 16 Reset Button 17 MicroSD Card Slot 4 IR LED lights enhances the night vision in car. Rear facing camera for in-car video recording. USB port for charging or transferring data. For HDMI (High-Definition Multimedia Interface) cable Press to force reset the device. Provides expandable storage (up to 256GB in FAT32, Class 10) LED Indicator Red light is visible on the OK Button [10] Camera is charging.
1440P Super HD 1440P Super HD USB Charger POWER BANK B. Ensure the Mini USB Cable and Car Charger are well connected While charging, the LED indicator light on the OK Button will blink red. Note: 1. The device has two USB ports available for charging – on the camera or via the suction cup mount. 2. When charging via computer, please use the USB port located on the mount.
3.2 Installing a Memory Card Please use a genuine microSD memory card from 32GB to 256GB with a speed rating of class 10 or higher. Carefully insert the memory card into the camera’s card slot until it clicks. To remove the card, power off the camera first, then push the card into the slot until it clicks again.
ro N2 P 2. Thoroughly clean the windshield using water or alcohol, and wipe clean with a dry cloth. 3. Wipe the Suction Mounting Pad clean on the Suction Mount. 4. Securely attach the Suction Mount to the windshield, and rotate the locking clamp on the mount 90° upward until it clicks. 5. Carefully route the power cable around the windscreen and tuck it under the trim.
6. With the Mini USB Cable, connect the supplied Car Charger to the Camera Mount Base. 7. Insert the Car Charger into your vehicle’s cigarette lighter port. vehicle’s cigarette lighter port 8. Start the car. 9. The camera will auto power on and start recording. 4. Basic Operation 4.1. There are two ways to power ON/OFF the camera: A. Manually Single press the Power Button to power ON the camera unit, long press the button to power it OFF.
B. Automatically When connected to the car charger, the camera will auto-power ON after you start your car and the battery charging will commence. The camera will power OFF 5 seconds after you turn off the car engine. 4.2. Menu Settings After powering ON the camera, press the MENU button to enter the setup process.(If the camera is recording video, press the OK button to stop recording before pressing the MENU button.) Record Setup System Setup GPS Setup Files A.
toggle it OFF/ON. -Parking Monitor: Default is OFF. Press DOWN followed by OK to toggle it OFF/ON. -Exposure: Default is 0. Pressing OK gives the following options: 0, -1.0, -2.0, +2.0, +1.0 -Car Number Plate: Press UP/DOWN and OK to set your car license number. -HDR: Default is ON. -Stamp: Default is ON. Press OK to toggle it OFF/ON. Stamp shows the date/time, logo, car number, Speed and GPS Location information. -Rotate Display: Default is OFF. Press OK and DOWN button to toggle it OFF/ON.
-Default Setting: Press OK and select OK to reset the device back to stock factory settings. Press the MENU button to exit and complete the setup. C. GPS setup Note: To use the GPS function requires the purchase of an extra GPS mount for the camera. -GPS Setup: Default is ON. Press OK to toggle it ON/OFF. -Speed Unit: Default is MPH. Press OK to select either KM/H or MP/H. Press the MENU button to exit and complete the setup. D. Files Review and delete images/videos stored in the file folders.
Time&Date 03 / 05 / 2017 10 / 48 / 08 DD/MM/YY M BACK ENTER OK 4.4 Dual Recording Modes By default (DUAL CAM RECORDING mode), 1080P+1080P resolution will show on the screen, both cameras will capture road front and inside cabin at dual 1920x1080P (30fps).
4.5 Auto LCD OFF This feature avoids any chance of the screen being a distraction in the vehicle, especially at night when the illumination from the LED screen can be a nuisance or even a hazard to the driver. The default setting is 3 MIN. With this function, the camera’s LCD will light off after 3 minutes but recording will continue with blue light blinks on the emergency button. You can press any button to light on the screen.
1080P+1080P 0:23 3 0 03:07:29 01/01/2017 By default, the Loop Recording Time is 3 minutes. Please go to “Record Setup”>“Loop Recording” to change it to 1 minute or 5 minutes. When Loop Recording is turned off, the camera will record video in 20 minute clips, but will not overwrite old videos when the storage card is full. The loop recording video file name format is “Year_Date_Time_ SerialA”.
1080P+1080P 0:23 3 0 03:07:29 A 01/01/2017 Night mode off Night mode auto on/off Night mode on Please note: If IR lights on, the video footage of the cabin will turn into black and white. 4.8 Event Recording Critical event detection is triggered by the G-Sensor (Gravity Sensor) and will auto-detect vehicle impacts and collisions. This will cause the camera to protect the current video clip from being overwritten by locking it and saving the footage in the “Video/Event” folder.
Event videos are stored in the “Video/Event” folder, and cannot be automatically overwritten. Note: The camera will auto overwrite old Event videos once the Event folder has accumulated 30% of the card capacity. Please regularly transfer important videos to your PC or another storage location (e.g. external hard drive). To maintain good read/write performance, the microSD card should be formatted every 1-2 two weeks. 4.9 Voice Recording By default, the voice recording is ON.
4.10 Parking Mode Parking Mode operates as a sentry function under different situations. To activate Parking Mode, go to “Record Setup”>“Parking Monitor”, press OK and select ON. 4.10.1 Triggered by MOTION DETECTION When the Parking Mode has been turned on, and no movement is detected in front of the camera after 5 minutes of recording, then Parking Mode is activated. This is represented by an icon (P) at the left side of the screen. Full frame recording will be triggered by the motion detection sensor.
NOTE: To ensure the camera is able to function in Parking Mode, please keep it powered with a mobile power bank or hardwire it directly to the car battery. We do not recommend running the camera continuously for more than 10 hours. 4.11 TIME LAPSE If TIME LAPSE is selected, the camera will take static photos at the set time interval – either 1, 5 ,10, 30 or 60 seconds – to create a video montage.
0:23 ! P OK 4.13 Connecting External GPS Receiver (Optional Accessory) 1. Install the External GPS Mount onto the camera instead of the original mount. 2. Plug the Mini USB Connector into the GPS Mount to power it. 3. Once charged, the camera will power on. Recording will commence if a microSD card has been inserted, just press the Confirm Button to stop recording. 4. Press the MENU button to enter setup, go to “GPS Setup”>“GPS Setup” to activate the camera’s GPS function. 5.
4.14 Viewing Video/Photos on the Camera Press MENU and go to “Files”, press OK and UP/DOWN button to navigate to >“Normal” or >“Event” or >“Photos” or >“All” file folders to view and playback videos or photos on the camera display. Use the UP/DOWN buttons to select the file and press Confirm to playback/pause. During playback, press UP to rewind, and DOWN to fast forward.
NOTE: When connected to your computer under “Mass Storage” status, standard camera setup and operations will be disabled. View on a TV The camera has a mini HDMI port for connecting an external display such as a monitor or TV. Please note that the product doesn’t come supplied a mini HDMI to HDMI cable. 1. Use a USB charger to charge the camera. 2. Insert the mini HDMI connector into the camera’s HDMI port. 3. Insert the HDMI connector end into your TV or monitor’s HDMI port. 4.
4.16 Working Temperature The camera is designed to operate in temperatures from -4 to 158°F (-20 to 70°C), temperatures outside this range risk degrading thecamera’s performance work and causing damage. To avoid damage •In hot weather, do not expose the camera directly to the sun when the car is parked. •In extreme winter conditions, i.e. 4°F (-20°C) or lower, detach the camera from the windshield when not in use, and store in the glove box.
5. Specifications The specifications of this product may change without prior notice due to product improvements. Model N2 Pro Processor NOVATEK NT96660 Image Sensor Front: OV4689 Rear: Sony IMX323 Display 1.5 inch TFT LCD (4:3) Lens Front: 170° wide viewing angle, full 6 layer glass lens with F/1.8 wide aperture. Rear: 140° wide viewing angle, F/2.0 wide aperture lens. Languages English/Deutsch/Japanese/Spanish/French/Italian/ 简体中文(Simplified Chinese) Video H.
6. Warranty & Support Warranty The VANTRUE® OnDash N2 Pro Dual Dash Cam comes with a full 12 months warranty.If you register your product on our official site (www.vantrue.net/register), you can extend the warranty to 18 months. Support If you have any questions regarding your product, please do not hesitate to contact us at support@vantrue.net, or drop us a message through the live chat box at www.vantrue.net. Queries are typically answered within 12-24hours.
1. Was ist in der Box? A C D B E G F A. Dual Auto-Ladegerät mit eingebautem 10ft Mini-USB-Kabel E. N2 Pro Dual Dash Cam User Bedienungsanleitung B. VANTRUE® N2 Pro Dual Dash Cam F. Schnellstartanleitung C. Saugnapfhalterung G. Garantiekarte D.
2. Die Übersicht über Kamera 1 8 4 5 6 2 9 3 10 11 12 13 7 16 17 15 Num. Name 18 Beschreibung 1 Steckverbinder Verbindet sich mit der Saugnapfhalterung. 2 Lautsprecher Liefert Ton bei der Wiedergabe von Videos. 3 Frontkamera-Objektiv 4 PowerTaste 5 Aufwärts-Taste 6 Abwärtstaste Frontkamera für Überwachung der Fahrspuren. Power Ein / Aus wenn lange drücken; IR LED Lichtschalter. Aufwärtsauswahl; Langsam vorwärts bei der Wiedergabe von Videos; Mikrofon EIN / AUS-Schalter.
10 OK-Taste Stoppt / startet die Videoaufnahme; Bestätigt die Einstellung. 11 LCD Bildschirm 1,5 "TFT Farb-LCD-Bildschirm. 12 IR LED Lampe 4 IR LED-Lampen verbessern die Nachtsicht im Auto. 13 Rückfahrkamera Objektiv Rückseitige Kamera für Videoaufnahmen im Auto. 14 Mini USB Anschluss USB-Anschluss zum Laden oder Übertragen von Dateien. 15 AV-Ausgang AV Anschluss verbindet sich mit einem externen Gerät. 16 HDMI-Anschluss Verbindet mit HDMI-Kabel.
3. Vorbereitung vor dem Einschalten 3.1. Vor dem Gebrauch laden Sie die Kamera 2-3 Stunden lang auf. A. Laden Sie über Ihr USB-Ladegerät auf 1440P Super HD 1440P Super HD USB-Ladegerät Energie Bank B. Laden über das Autoladegerät auf. Während des Ladevorgangs blinkt die LED-Anzeige rot.
Hinweis: 1. Das Gerät verfügt über zwei Anschlüsse zum Laden - den USB-Anschluss an der Kamera und den USB-Anschluss an der Saugnapfhalterung. 2. Verwenden Sie beim Aufladen über einen Computer den USB-Anschluss an der Halterung. Wenn Sie den Anschluss an der Kamera verwenden, erkennt das Gerät Dateien, die mit dem Computer verbunden sind, und wechselt automatisch in den Modus "Massenspeicher", in dem die Kamera nicht eingerichtet oder betrieben wird. 3.
HINWEIS: 1. Die MicroSD-Karte sollte alle zwei Wochen formatiert werden, um die Lebensdauer der Speicherkarte zu maximieren. 2. Bitte nehmen Sie die Karte nicht heraus, wenn die Kamera aufnimmt, falls die wichtigen Videodateien fehlen. 3.3 Installieren Sie die Kamera auf Ihrer Windschutzscheibe 1.Verbinden Sie die Saughalterung mit der Montagesockel der Kamera und drücken Sie sie hinein, bis sie einrastet. ro N2 P 2.
5. Verlegen Sie das Stromkabel um die Verkleidung Ihres Fahrzeugs. 6. Stecken Sie den Mini-USB-Stecker des Kabels in den USB-Anschluss an der Verriegelungsstange der Saugnapfhalterung. 7.Stecken Sie das Kfz-Ladegerät in den Zigarettenanzünder Ihres Fahrzeugs. Zigarettenanzünderanschluss des Autos 8. Starten Sie das Auto, die Kamera schaltet sich automatisch ein und beginnt mit der Aufnahme.
4. Grundlegende Operation 4.1. Es gibt zwei Möglichkeiten, die Kamera ein- / auszuschalten: A. Manuell Drücken Sie lange die Ein / Aus-Taste, um die Kamera ein- / auszuschalten. B. Automatisch. Beim Anschluss an das Autoladegerät schaltet sich die Kamera automatisch ein, nachdem Sie Ihr Fahrzeug gestartet haben und der Ladevorgang beginnt. Es schaltet sich automatisch innerhalb von 5 Sekunden nach dem Ausschalten des Fahrzeugs aus. 4.2.
A. Video Einstellung Drücken Sie die OK-Taste, um die Einstellungen zu bestätigen, und drücken Sie die Aufwärts/ Abwärts-Taste, um Einstellungsoptionen auszuwählen. -Auflösung: Die Standardeinstellung (DUAL CAM REkORDING Modus), zwei Kameras sind mit 1920x1080P (30fps). In SINGLE FRONT CAM REKORDING Modus, 2560x1440P (30fps), 2304x1296P (30fps), 1920x1080P (60fps), 1920x1080P (30fps)können frei gewählt werden. -Zirkulationsaufnahme: Die Standardeinstellung ist 3 Minuten pro Videoclip.
Spanish, French, and und Italianisch zu wählen. -Formatierung: Drücken Sie OK und die Abwärtstaste, und wählen Sie OK, um die microSD-Karte zu formatieren. -Datum& Zeit Einstellung: Drücken Sie Abwärts / Aufwärts und OK, um Datum und Uhrzeit einzustellen. Wenn Sie fertig sind, drücken Sie die Ein/Ausschalttaste, um das Menü zu verlassen. -Bildschirmschoner Einstellung: Die Standardeinstellung ist 3 Min. Der Kamera-Bildschirm wird während der Aufnahme in 3 Minuten ausgeschaltet.
-Normal: Normale Aufnahme von Videos und Bildern werden gespeichert. -Notfall : Notfallvideos (vom G-Sensor erkannt und manuell gesperrt) werden gespeichert. -Foto: Bilder werden gespeichert. -Alle: Alle Bilder und Videos werden gespeichert. 0.33/59.11GB Files Notfall Normal Foto Alle M Zurück Betreten OK 4.3 Zeit & Datum Einstellung Gehen Sie zur MENÜ-Oberfläche und "System Einstellung">"Zeit & Datum", drücken Sie die Ab-Taste zum Einstellen.
4.4 Dual-Aufnahmemodus In der Standardeinstellung (Duale Aufnahme-Modus) wird eine Auflösung von 1080P + 1080P auf dem Bildschirm angezeigt. Beide Kameras erfassen die vorde Straßen und die innere kabine bei Dual 1920x1080P (30fps).
Die Standardeinstellung ist 3 MIN. Bei dieser Funktion leuchtet die LCD-Anzeige der Kamera nach 3 Minuten auf, aber die Aufnahme wird fortgesetzt, wobei auf der Notfalltaste blaues Licht blinkt. Sie können eine beliebige Taste drücken, um auf dem Bildschirm zu leuchten. ! P OK Bitte gehen Sie zur System Einstellung, um diese Zeit auf 1, 3, 5 oder AUS einzustellen, um sie zu deaktivieren, damit das LCD immer an bleibt. 4.
1080P+1080P 0:23 3 0 03:07:29 01/01/2017 Standardmäßig ist die Zirkulation-Aufnahmezeit 3 Minuten. Bitte gehen Sie zu "Video Einstellung">"Zirkulationsaufnahme", um auf 1 Minute, 3 Minuten oder 5 Minuten für Ihren Bedarf zu wechseln. Wenn es ausgeschaltet wird, nimmt die Kamera Videos in 25 Minuten pro Clip auf, aber würde die alten Videos nicht überschreiben, wenn die Karte voll ist.
1080P+1080P 0:23 3 0 03:07:29 A 01/01/2017 Nachtsicht Modus Aus Nachtsicht Modus auto Ein/Aus Nachtsicht Modus Ein Bitte beachten Sie: Wenn IR leuchtet, werden die Videoaufnahmen der Kabine gedreht in schwarz und weiß. 4.
Das Notfallvideo wird im Ordner "Not" gespeichert und nicht überschrieben. Hinweis: Die Kamera überschreibt automatisch alte Notfall-Videos, sobald der Not-Ordner 30% der Kartenkapazität erreicht hat. Bitte übertragen Sie wichtige Videos regelmäßig auf Ihren PC oder einen anderen Speicherort (z. B. externe Festplatte). Um eine gute Lese/ Schreibleistung beizubehalten, sollte die microSD-Karte alle 1-2 Wochen formatiert werden. 4.9 Audio Rekord Standardmäßig ist die Audioaufnahme eingeschaltet.
4.10 Parkmodus Um den Parkmodus zu verwenden, gehen Sie zu "Video Einstellung" und wählen Sie Ein. Der Parkmodus wird durch den Bewegungserkennungssensor ausgelöst. Nach dem Aktivieren des Parkmonitors schaltet die Kamera automatisch in den Parkmodus, wenn während der Aufnahme 5 Minuten lang keine Bewegung vor der Kamera festgestellt wird. Das Parkmodus-Symbol erscheint auf der linken Seite des Bildschirms.
HINWEIS: Um die Kamera im Parkmodus zu halten, sollten Sie sie mit einer zusätzlichen Powerbank betreiben oder direkt mit der Autobatterie verdrahten. Empfehlen Sie nicht, die Kamera über 10 Stunden ununterbrochen in Betrieb zu halten. 4.11 Zeitraffer Wenn ZEITRAFFER ausgewählt ist, nimmt die Kamera statische Fotos im festgelegten Zeitintervall auf - entweder 1, 5, 10, 30 oder 60 Sekunden -, um eine Videomontage zu erstellen. Wenn Sie beispielsweise Zeitraffer 1 Sek.
0:23 ! P OK 4.13 Anschluss eines externen GPS-Empfängers (optionales Zubehör) Um die GPS-Funktion der Kamera zu verwenden, kaufen Sie bitte eine externe GPS-Empfängerhalterung. Die externe GPS-Empfängerhalterung könnte von Amazon gekauft werden. 1.Installieren Sie die externe GPS-Halterung anstelle der Originalhalterung an der Kamera. 2. Stecken Sie den Mini-USB-Stecker in den Anschluss an der GPSHalterung und laden für sie auf. 3.
6. Sie können das GPS und die Geschwindigkeit auf das Videomaterial stempeln, gehen Sie zu "Video Einstellung"> "Stempel">"Geschwindigkeit Stempel", "GPSStempel" zu setzen. 7. Sie können das Video auf VANTRUE GPS Viewer (zum Download auf www.vantrue.net.) Ansehen. 4.14 Video und Fotos ansehen Drücken Sie die Netztaste und gehen Sie zu "Dateiverwaltung"> "Not", "Normal", "Foto" und "Alle">"Not", um Videos auf der Kamera anzuzeigen und abzuspielen.
Auf einem Computer anzeigen 1. Stecken Sie den Micro-USB-Stecker des Datenkabels in den Anschluss der Kamera. 2. Schließen Sie den größeren USB A-Anschluss des Datenkabels an den Anschluss an Ihrem Computer an. 3. Auf dem Bildschirm der Kamera erscheint die "USB:Massenspeicher" -Schnittstelle; 4. Je nach Betriebssystem Ihres Computers erscheint das Gerät als Wechseldatenträger oder entfernbares Laufwerk.
4.15 Aktualisieren der Firmware Das System wird automatisch aktualisiert, wenn die microSD-Karte Firmware-Aktualisierungsdateien enthält. Nach dem Upgrade wird die Kamera automatisch neu gestartet. Stellen Sie sicher, dass Ihr Gerät mit der neuesten Firmware immer auf dem neuesten Stand ist. Bitte überprüfen Sie regelmäßig auf der VANTRUE-Website (www.vantrue.net) die neuesten FirmwareUpdates. Sie können Ihr Produkt auf der Website registrieren (www.vantrue.
5. Spezifikationen Spezifikationen dieses Produkts können sich ohne vorherige Ankündigung für Produktverbesserungen ändern. Modell N2 Pro Processor NOVATEK NT96660 Image Sensor Front: OV4689 Rear: Sony IMX323 Bildschirm 1.5 inch TFT LCD (4:3) Lens Front: 170° breiter Betrachtungswinkel und volle 6 Schicht Glaslinse mit großer Öffnung von F / 1.8. Rück: 140° breiter Betrachtungswinkel , F/2.0 große Öffnung lens.
6. Garantie und Unterstützung Garantie Die VANTRUE ® OnDash N2 Pro Dual Dash Kamera wird mit 12 Monaten Garantie geliefert. Wenn Sie Ihr Produkt auf unserer offiziellen Website (www.vantrue.net/register) registrieren, können Sie die Garantie auf 18 Monate verlängern. Unterstützung Wenn Sie Fragen zu Ihrem Produkt haben, zögern Sie nicht, uns über Amazon zu kontaktieren oder senden Sie uns eine E-Mail an support@vantrue.net. Jeder Kontakt wird innerhalb von 24 Stunden beantwortet.
Kontaktieren uns: f www.vantrue.net/contact facebook.com/vantrue.
1. ボックスに何が入っていますか? A C D B E F G A. デュアルUSBポート付きの車載充 E. N2 Pro デュアルドラレコ取扱説明書 B. VANTRUE® N2 Pro デュアルドライ F. クィックスタートガイド C. 吸盤マウント G. 保証書 電器(3m) ブレコーダー D.
2. ドラレコの概要 1 8 4 5 6 2 9 3 10 11 12 13 7 15 16 17 NO. 名称 働き 1 ブラケットホルダー 付属のブラケットを取り付けます。 2 フロントカメラレンズ フロントカメラでビデオを録画します。 3 スピーカー 動画を再生する場合サウンドを実現します。 4 電源 ボタン 電源のオン/オフをします; 録画中、IR LEDライトのオン/オフをします 5 アップボタン メニューモード−上向き; 再生中−巻き戻し; マイクのオン/オフをします。 6 ダウンボタン 下向き; 再生中−早送り; スクリーンのライトのオン/オフをします。 7 メニューボタン 録画停止中に押してメニューモードへ。 8 マイク 映像とともに音声も記録します。 9 スナップショット /緊急 / 駐車モードボタン 映像とともに音声も記録します。 10 OKボタン 確認ボタン●録画中、押して録画停止 11 LCD 1.
13 リアカメラレンズ フロントカメラで車内のビデオを録画 します。 14 ミニUSBポート 充電やデータを転送します。 15 HDMI ポート HDMIケーブルを接続し、外部モニタ ーへ出力します。 16 リセットボタン 初期設定に戻ります。 17 メモリカード挿入口 向きを確認してmicroSDHC カードを 挿入します。 LEDインジケータ OKボタンは赤になる(点灯しています)[10] 充電中 緊急ボタンはグリーンになる(点滅しています)[9] 録画中 スクリーンの概要 1080P+ 撮影解像度 (フロントカメラ+リアカメラ) 1080P 撮影時間 (現在のビデオ) 録画待機中 録画中 A 1080P+1080P ループ録画設定時間 タイムラプス撮影オン 上書禁止動画撮影時鍵 マーク点灯します。 3 駐車監視モードオン 駐車監視モードオフ GPS受信モード ON (要・別売GPS受信機) GPS受信モード OFF (要・別売GPS受信機) 0:23 夜間モード オフ 夜間モード 自動 夜間モード オン 録画中に静止画撮影 G-センサー ON
3. 入門 3.1.使用の前に、ドラレコに2-3時間充電してください。 a. USB充電器で充電 1440P Super HD 1440P Super HD USBチャージャー モバイルバッテリー b. 車載充電器で充電 充電中、OKボタンのLED インジケーターは赤く点灯して います。 注意: 1. デバイスは二つの充電用USBポートがあります。本体の下部にUSBポートが あり、吸盤マウントの上部にUSBポートがあります。 2.
3.2 メモリーカードの取り付け クラス10以上と32GB以上のmicroSDを使ってください。64GB、128GB、 256GBのカードをサポートします。ご使用前に、microSDはフォーマ ットを行ってください。メモリーカードのデータが壊れる可能性があ りますので、動作中にメモリーカードを取り出すことをしないでくだ さい。 挿入:microSD メモリーカードの端子面と本機の背面が同じ向きになる ようにして、カチッと音がするまでmicroSD メモリーカード挿入口へ 差し込みます。 取出し:microSDメモリーカードを1 回押すと取り出すことができます。 注意:64GB以上のメモリーカードを使用したい、パソコン或いは本体で メモリーカードを「FAT32」へフォーマットしてください。 注意: 1.microSDカードは消耗品です。メモリーカードの寿命を延長するため、 2週間を経って、メモリーカードをフォーマットしてくださいね。 2.メモリーカードには書き込み可能回数などの製品寿命があります。使 用状況に応じて定期的に新品に交換するをおすすめします。 3.
3.3 ドライブレコーダーの取り付け 1. ブラケットを本機ブラケットホルダーに、カチッと音がするまで差 し込んで取り付けてください。 ro N2 P 2. フロントガラスを拭いて事前に決めた位置に軽く押し当て、 マウ ントをロック方向に 90 度まわしてください。 3. 【フロントガラス 上部より 1/5 以内、ルームミラー裏側で視界を 妨げない場所 へ設置して下さい】 4.
5. シガープラグのUSBケーブルでマウントのUSBポート と接続してく ださい 6.
4. 基本操作 4.1. 電源のオン/ オフ A. 手動で。 電源ボタンを押し、ドラレコを起動します;電源ボタンを3秒間押し 続いて、ドラレコはオフになります。 b. 自動で。 シガーライターソケットや他の外部電源に接続すると、カメラは自 動的にオンになります。電源が切られた30秒後、本機の電源は自動 的にオフになります。 4.2.
A.
B.
▶全て: 全ての通常の録画ビデオ、画像とイベントビデオが保存され ます。 ファイル 0.33/59.11GB イベント ノーマル 画像 全て M 戻る 確認 OK 4.3.日付/時間の設定 【システム設定】>【日付/時間の設定】を選択し、確認ボタンを押して ください。 まず、年を設定してください、アップ/ダウンボタンを押しで、正確な番 号を選択し、確認ボタンを押して、次、月を設定してください、確認ボ タンを押し、年、月、日、そして、時間は全部設定した後、確認ボタン を押してください。そうしたら、設定終了しました。 日付/時間 03 / 05 / 2017 10 / 48 / 08 DD/MM/YY M 戻る 確認 OK 4.4.
1080P+1080P 0:23 3 0 03:07:29 01/01/2017 前録モードを使うため、【録画設定】>【解像度】を押して、前録モー ドの選択可能な設定:2560x1440P (30fps), 2304x1296P (30fps), 1920x1080P (60fps), 1920x1080P (30fps) 解像度 Dual 1920x1080P 30fps 2560x1440P 30fps 2304x1296P 30fps 1920x1080P 30fps M 戻る 確認 4.5.
! P OK 選択項目は1分、3分、5分、オフがあります。もしオフを選択して、モ ニターは常に点灯しています。 4.6.
4.7.赤外線夜視補助ライト 赤外線夜視補助ライト:初期設定は自動です、電源ボタンを押して、オ ン/自動/オフが選択できます。 M 1080P+1080P 0:23 3 0 03:07:29 A 01/01/2017 夜間モード オフ 夜間モード 自動 夜間モード オン 注意: 赤外線夜視補助ライトはオンをすると、赤外線に反応したものを 白黒で映像を写しだす。 4.8.
録画中、揺れや衝撃を発生した場合、感度に合わ自動的に録画ファイ ルをロックします。その際画面の中部にキーのアイコンが現れます。 ロックされた映像は新たなビデオに上書きされません。 ! 1080P+1080P 0:23 3 ! P OK 0 03:07:29 01/01/2017 ロックされた映像はイベントファイルに保存されて、新たなビデオに 上書きされません。 注意:イベントファイルにビデオの容量は総容量の30%以上に達する場 合に、以前のイベントビデオは新たなビデオに上書きされます。定期的 にPCで重要なビデオを保存してください。あるいは、書き込み速度を 守るため、1-2週間ぐらいメモリーカードをフォーマットしてください。 4.9.
1080P+1080P 0:23 3 0 03:07:29 01/01/2017 4.10.
! P OK ドラレコ本体は移動される場合に、駐車モードは自動的に退出します。 ★注意: カメラはオンにしているとき、動きの感知ができます。内蔵 しているバッテリーの容量は小さいので短時間しか機能しません。長 時間(10時間以下)使用する場合、外部電源を接続してください。また バッテリー消費を少なくする為LCD スクリーンセーバーにて選択時間 をなるべく短くすることをお勧めします。 4.11.
4.12. 撮影 ▶録画中、緊急/カメラボタンを押し、写真を撮ることもできます。 0:23 ! P OK 4.13.専用なGPS受信機の取り付け(別売品) VANTRUE OnDash N2 ProドライブレコーダーはGPS受信機を含んでい ないので、GPS機能を使いたい場合は、AmazonでVANTRUE GPS受信機 を購入してください。 1.付属のマウントの代わりに、GPSマウントを取り付けてください。 2.GPSマウントのUSBポートで給電してください。 3.電源を入れると、ドラレコは自動的に録画します、確認ボタンを押 し、録画を停止します。そして、メニューボタンを押し、【GPS設定】 >【GPS設定】を押し、オンを選択してください。 4.
5. 画面にGPSと速度のスタンプを現わしたい場合、【録画設定】> 【スタンプ】>【GPSスタンプ】、【速度スタンプ】を設定してくだ さい。 6.VANTRUE GPS ViewerでGPS情報を含まれているビデオを再生できま す。(VANTRUE GPS Viewerのダウンロードアドレス: (www.vantrue.net) 4.14.
PC で表示 1.カードリーダーなどを使用してパソコンで再生します。ファイルを MOV をサポートするプレーヤー使用すると、ビデオとオーディオファ イルを再生することができます。 2.付属のUSBケーブルでカメラ本体のUSBポートと接続すると、画面で 「ストレージ」と「電源オン」が表示されます。「ストレージ」を選 択して、ドラレコを操作出来なく、ただパソコンでデータを読み取る ことができます。PC でビデオを再生することができます。 注意:パソコンでドラレコに給電する場合に、マウントのUSBポートと 接続してください。 TV で表示 HDMI ケーブルでHDTV と接続し、動画を見ることができます。HDMI ケーブルが含まれていませんです、自分でHDMIケーブルを用意してく ださい。 1.USB充電器でドラレコに給電してください。 2.ミニHDMIケーブルでドラレコをHDTVと接続してください。 3.テレビをHDMI入力モードに調整します。 4.正常に接続されると、カメラの画面は黒くなり、テレビ画面に投影さ れます。 注意:HDMIモードを使用する時、必ずドラレコに給電してください。 4.15.
4.16.
5. 製品仕様 本製品の仕様及び外観は、改良のため予告なく変更することがあります。予 めご了承ください。 型番 N2 Pro プロセッサー NOVATEK NT96660 画像センサ フロント: OV4689 リア: Sony IMX323 液晶サイズ 1.5 インチ TFT LCD (4:3) レンズ フロント: 広角170度大口径F/1.8の光学6G多層ガラスレンズ リア: 広角140度大口径F/2.0レンズ 言語 英語、中国語、日本語、ドイツ語、スペイン語、フランス語、 イタリア語 ビデオ H.
6. 保証とアフターサービス 保証について VANTRUE® OnDash N2 Proドライブレコーダーは12ヶ月の保証期間があり ます。18ヶ月の保証期間に延長するため、弊社のウェブサイトで (www.vantrue.net/register)ご注文の商品を登録してください。 サポートについて 製品に何のご質問・問題がございましたら、いつでもお気軽にアマゾン経 由でお問い合わせいただくか。或いは、support@vantrue.netまでご連絡 ください。すべてのお問い合わせは、営業日に24時間以内にご返信を差し 上げます。 ご意見? 製品について何の意見がございますか?いつも私たちの製品とサービスの 品質とユーザーエクスペリエンスを向上させるために全力で取り組んでい ます。製品を改善する上の意見やアドバイスを持っている場合は、ご遠慮 なく弊社までご連絡をお願いいたします(アマゾお問い合わせ或いは support@vantrue.
お問い合わせ: f www.vantrue.net/contact facebook.com/vantrue.