VT-TABLET-5082 User Manual Product Version: 1.2 Date: 2021/8/18 For any question, please contact Chengdu Vantron Technology, Ltd. Copyright © Vantron Technology, Ltd. All rights reserved.
Change History This document describes VT-TABLET-5082 briefly and is intended for all readers. This table describes the version and release date. No. Version Date Description Author 1 1.0 2021/4/23 First release. Deng Shan 2 1.1 2021/7/21 Update interface Kang 3 1.
Foreword Copyright While all information contained herein have been carefully checked to assure its accuracy in technical details and printing, Vantron assumes no responsibility resulting from any error or features of this manual, or from improper uses of this manual or the software. Please contact our technical department for relevant operation solutions if there is any problem that cannot be solved according to this manual.
Limitation of Liability/Non-warranty For direct or indirect damage to this device or other devices of Vantron caused by failure of conforming to this manual or the safety instructions on device label, Vantron assumes neither warranty nor legal liability even if the device is still under warranty. VT-TABLET-5082 should be installed, debugged and maintained by professionals. The outside antennas are not permitted to be installed or to be changed by non-professionals.
Safety Instructions for Power Cables and Accessories Use Proper power source only. Start only with power source that satisfies voltage label and the voltage necessary according to this manual. Please contact technical support personnel of Vantron for any uncertainty about the requirements of necessary power source. Use tested power source.
Contents 1. OVERVIEW ................................................................................................................................................................................ 1 1.1 Introduction ...................................................................................................................... 1 1.2 Order Information ............................................................................................................. 2 2.
VT-TABLET-5082 User Manual 1. Overview 1.1 Introduction Thank you for choosing Vantron. It is our commitment to provide our valued customers with the embedded devices equipped with the state-of-the-art technology and product services. Tablet enables interaction between operators/users and applications, connects industrial control products such as wireless, transducer, built-in battery, storage, etc. Tablet adopts a display and supports units such as touch screen, keyboard, audio, sensors, etc.
VT-TABLET-5082 User Manual 1.2 Order Information Table 1-1 is an example of order information. Table 1-1 Order information 5V/9V DC Input ,8 '' IPS TFT LCD, RK3566, Quad-core 1.8 GHz, OTG VT-TABLET-5082 TYPEC USB, Two SPEAKERS, WIFI a/b/g/n/ac BT5.0,LTE B48, etc.
VT-TABLET-5082 User Manual 2. VT-Tablet-5082 Hardware Instructions 2.1 Product Appearance Figure 2-1 and Figure 2-2 show the views of our product.
VT-TABLET-5082 User Manual Figure 2-2 Back view 4
VT-TABLET-5082 User Manual 2.2 Specifications Table 2-1 shows the specifications. Table 2-1 Specifications CPU RK3566+RK809-5, Quad-core ARM Cortex-A55 (up to 1.8GHz) Processor SYS Mem LPDDR4-2400 2GB Flash eMMC 32/64GB Display 8” LCD, Resolution1280x800. Color depth: 16.7M. brightness : Typical 250 cd/m2 TP Capacity Touch screen, support 5 point and double tap to wake up. Media Camera Audio Front Camera, 5MP, MIPI 4-lanes Support 2x3.
VT-TABLET-5082 User Manual Storage -20C ~ +60℃ Temp. 2.3 Buttons Power Button Power off the device and on/off the screen. Volume buttons You can use volume up and down buttons to adjust the volume and use the down button to download the software. Never apply excessive pressure to a button, or you may cause damage which is not covered under the warranty. 2.4 Interface Description 2.4.1 USB OTG (Type C) With a standard Type C USB 2.
VT-TABLET-5082 User Manual 2.4.4 FM Support FM function, Frequency 87~108MHz. 2.4.5 Wi-Fi and Bluetooth The tablet supports 802.11 a/b/g/n/ac Wi-Fi and BLE 5.0 With 2 internal antennas, both Wi-Fi and BLE can achieve better performance. 2.4.6 LTE The tablet supports LTE B48 with 4 internal antennas, support Cat7. 2.5 Packing List Table 2-2 describes the packing information. Table 2-2 Packing list No.
VT-TABLET-5082 User Manual 3. Software Instruction VT-TABLET-5082 has been pre-loaded with Android image, so the system can run Android tool to update the system image. For more information, please refer to VTTABLET-5082_User_Guide.
VT-TABLET-5082 User Manual 4. Device instructions 1), Power supply: This device only supports 5V DC input. Please use the adapter provided with the DCJack. 2), Typec usb supports both host and client modes. 3), Enter the download mode method: 1) Hold down the download key (the middle of the three keys) on the board. 2) Plug in the 5V adapter. 3) Plug in the USB cable. Once the computer recognizes usb and go to download mode , you can release the button and download software.
VT-TABLET-5082 User Manual 5. Tips Waste Disposal It is recommended to disassemble the device before abandoning it in conformity with local regulations. Please ensure that the abandoned batteries are disposed according to local regulations on waste disposal. Do not throw batteries into fire (explosive) or put in common waste canister.
VT-TABLET-5082 User Manual Pay attention to caution signs. Caution signs in this manual remind of possible danger. Please comply with relevant safety tips below each sign. Meanwhile, you should strictly conform to all safety tips for operation environment. Notice Considering that reasonable efforts have been made to assure accuracy of this manual, Vantron assumes no responsibility of possible missing contents and information, errors in contents, citations, examples, and source programs.
VT-TABLET-5082 User Manual 6. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
VT-TABLET-5082 User Manual Appendix A: How to Contact Us If you have any problem or want to know more about our products, visit www.vantrontech.com or contact us. US Office: Vantron Technology, Inc. Address: 440 Boulder Court, Suite 300, Pleasanton, CA 94566, USA Tel: 925-621-8758 Email: sales@vantrontech.com China Office: Chengdu Vantron Technology, Ltd Address: 6th Floor, 1st Building, No.