User’s Manual 900 MHz Daughter Board VSUB075 Note: Required information is contained on pages two and three Vantage Controls 1061 South 800 East Orem, UT 84097 (801) 229-2800 June 13, 2001
FCC Compliance Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Introduction The VSUB075 is an RF transceiver module. It interfaces with other equipment using standard serial asynchronous communications protocol at a rate between 9600 and 57600 baud. The transmitter has a peak output power of 140 milliwatts. It is designed to be incorporated into control devices developed by Vantage Controls. The module operates under FCC approval in the 902-928 MHz ISM frequency band.
Specifications Model #: ....................................................................................... VSUB075 Frequency Range...................................................902-928 MHz ISM Band Power Supply ............................................................................... 8-12 VDC Current required while transmitting .................................................. 180mA Current required while receiving.........................................................
