Quick Start Guide

ManualsBrandsVanatoo ManualsElectronicsTransparent One Encore

Quick Start Guide

VANATOO

TRANSPARENT ONE ENCORE

™

POWERED SPEAKERS

™

Unpack Your System

1) Active speaker

2) Passive speaker

3) 2 Grills

4) IR remote control

5) Optional isolation feet

6) USB A to USB B cable

7) 3.5 mm to 3.5 mm cable

8) Four conductor

speaker wire

9) 3.5 mm to RCA “Y” cable

10) Quick Start Guide and a

Safety Sheet

Connect the Speakers

TURN OVER

The included speaker interconnect cable with screw-on collar

connectors makes this quick and easy.

Connect Power

1. Make sure the power switch (2) is in the OFF position.

2. Plug the AC power cord into the power outlet.

Connect Your Audio Source

Turn the volume controls on the speaker (1) and on the audio

source both to minimum.

1. Analog (3) — Connect your source using the included

using 3.5mm to 3.5mm cable or 3.5mm to RCA cable as

appropriate for your source component.

2. Digital Coax (4) — Connect your source component using

a 75 ohm digital coaxial RCA cable.

3. Optical (5) — Connect your source component to the

Vanatoo T1E using a Toslink optical cable.

4. USB (6) — Connect your computer to the T1E using the

supplied USB A to USB B cable. Select the Vanatoo T1E

in your computer’s audio settings.

5. Bluetooth —

a. Press and release the “Pair-Prog” button (7) on the

rear of the active speaker, or press “Enable” and

then “BT Pair” on the remote control.

b. Ensure Bluetooth is turned-on on your source

device and pair with the Vanatoo T1E.

c. Ensure your source device is connected to the

Vanatoo T1E over Bluetooth and play music!

PAIR-PROG

SERVICE

Summary of content (4 pages)

PAGE 1
VANATOO ® TRANSPARENT ONE ENCORE ™ POWERED SPEAKERS ™ Quick Start Guide 1 Unpack Your System 1) Active speaker 7) 3.5 mm to 3.5 mm cable 2) Passive speaker 8) Four conductor speaker wire 3) 2 Grills 4) IR remote control 5) Optional isolation feet 6) USB A to USB B cable 2 1 3 2 9) 3.5 mm to RCA “Y” cable 10) Quick Start Guide and a Safety Sheet 5 4 6 8 7 9 Connect the Speakers The included speaker interconnect cable with screw-on collar connectors makes this quick and easy.
PAGE 2
5 Designate Left-Right speaker Set the Left–Right switch (9) to designate whether the active speaker is located to your right or left (as you face the speakers). This ensures the music is recreated as it was recorded. 6 Install the Grills Grills come in individual plastic bags. Simple magnetic mounting (no or little alignment necessary). Can go either way such that the “Vanatoo” logo is upright on the bottom. 7 Listen to Music! Turn the power switch to the ON position (2).
PAGE 3
VANATOO ® TRANSPARENT ONE ENCORE ™ POWERED SPEAKERS ™ SAFETY PRECAUTIONS 1. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
PAGE 4
VANATOO ® TRANSPARENT ONE ENCORE ™ POWERED SPEAKERS ™ PRÉCAUTIONS DE SÉCURITÉ 1. Le symbole composé d’un éclair terminé par une flèche, avec un triangle équilatéral, est destiné à avertir l’utilisateur de la présence d’un « voltage dangereux » sans isolation à l’intérieur du produit d’une force suffisant à provoquer un risque de choc électrique.