Specifications

ManualsBrandsValcom Manualsaudio & home theatreIP FlexHorn One-Way

1 947630

ISSUE 1

VIP-480L IP Paging Horn

INTRODUCTION

The VIP-480L IP Paging Horn is a self contained

paging system which enables voice paging up to

1200 feet from an Ethernet connection. The

VIP-480L consist of a high efficiency 3 Watt

Class-D Horn and a VIP-LLE Network Extender

allowing stand alone capability when used with a

SIP Phone System or can be accessed from a

variety of Valcom managed VoIP products.

SPECIFICATIONS

Access Methods

• PBX, FXO Port w/VIP-811

• POTS telephone set w/VIP-811

• PBX, FXS Port w/VIP-821

• Valcom M Cast Page Group

• SIP

Features

• RJ-45 network connection

• LED Status Indicator

• Network activity LEDs

• 802.3af compliant

• High Efficiency Class-D 3 Watt Amplifier

Dimensions/Weight

(HORN)

• 6.8”H x 8.3”W x 3.3” D

(17.3cm H x 21.1cm W x 8.4cm D)

• 2.1 lbs. (0.95 kg)

Network Extender

(VIP-LLE)

• 1.30” H x 6.10" W x 6.00" D

(3.51 cm H x 15.72 cm W x 13.51 cm D)

• Weight: 0.85 lbs. (0.39 kg)

Nominal Specifications – HORN

Input Impedance: 600 Ohms

Input Level: -10dBm

Output Impedance: 600 Ohms

Output Level: -10dBm nominal

Nominal Specifications – VIP-LLE

Via 802.3af PoE Ethernet Switch:

Class 3 (12.95W)

Environment

Temperature: 0 to +40° C

Humidity: 0 to 85% non-precipitating

Packing List

Qty Item

1 VIP-LLE Network Extender

1 3 Watt High Efficiency Horn

1 VSP Document

2 Mounting Brackets

1 VIP Quick Start Guide

4 Rubber Feet

4 Wood Screws

1 RJ-45 Termination Block

1 RJ-45 Patch Cable

1 “C” Clamp

Summary of content (5 pages)

PAGE 1
ISSUE 1 VIP-480L IP Paging Horn INTRODUCTION The VIP-480L IP Paging Horn is a self contained paging system which enables voice paging up to 1200 feet from an Ethernet connection. The VIP-480L consist of a high efficiency 3 Watt Class-D Horn and a VIP-LLE Network Extender allowing stand alone capability when used with a SIP Phone System or can be accessed from a variety of Valcom managed VoIP products.
PAGE 2
Mounting (HORN) INSTALLATION FCC Information This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
PAGE 3
Network Connection (Fig. 1) TECHNICAL ASSISTANCE The VIP-LLE Network Extender has one CAT-5 RJ-45 “NETWORK” connector and one CAT-5 color-coded connector on the rear panel. Use the supplied CAT-5 patch cable to connect the NETWORK connector of the VIP-LLE Network Extender to a 802.3af compliant PoE port (300 feet maximum distance). Signal Connections (Fig.
PAGE 4
UNIVERSAL BRACKET SURFACE MOUNTED WITH A UNIVERSAL MOUNTING BRACKET UNIVERSAL BRACKET WITH CLAMP "C" CLAMP FOR "I" BEAM MOUNTING ATTACH CLAMP TO HORN ATTACH FLEXHORN TO BEAM FLUSH MOUNT USING MOUNTING SCREWS: USING THE TEMPLATE, MARK LOCATION OF OPENING AND MOUNTING HOLES ON WALL. DRILL HOLES APPROPRIATE TO MOUNTING HARDWARE AND CUT OUT THE OPENING. HOLDING FLEXHORN FIRMLY AGAINST A FLAT SURFACE, DRILL THROUGH EACH MOUNTING BOSS AS SHOWN.
PAGE 5
W/BR PAIR VALCOM Status Link Act RJ-45 Termination Block VIP-LLE BL/W 802.3af Compliant PoE Port (300' Max Distance) YL BR GY BK OR BL GN RD W/BL W/O W/GN W/BR W/BL W/GN PAIR Amplified Paging Horn *W/O PAIR NOT USED 900' MAX DISTANCE CAT 3/5/6 FIGURE 1 VALCOM LIMITED WARRANTY Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment.