VAIS TECHNOLOG Y www.vaistech.com Quick Start Model :VML Automotive Audio Player with USB 2.
Installation i Connecting MultiMediaLinQ Audio Wiring Harness (included) Audio Y-Harness (included) To the Head Unit To the factory Audio harness Model :VML Used for programming i Service Port USB 2.0 Host Power and Audio wiring harness Hard Drive Installation/Removal ! WARNING CAUTION ELECTROSTATIC SENSITIVE DEVICES IDE 2.
Installation i IMPORTANT We strongly recommend that you install the unit in an easily accessible location, so you can later upgrade the unit or re-program it in case of incorrect programming. @ @ @ Installation @ @ @ @ @ @ i Gain access to the back of you vehicle’s Head Unit.
Installation CD-MP3 Emulation Mode Selection (CD-MP3 emulation) CD-MP3 Emulation Mode programming steps: @ @ @ @ @ @ @ @ @ Properly install VML player. Put the “Left” programming switch in the “DOWN” position. Put ignition switch into the “ACC” position. Wait for a long beep followed by a few short beeps. This may take up to one minute. Return programming switches to their default position (both switches “UP”). Wait up to 30 seconds until confirmation beep. Put ignition switch into the “OFF” position.
Storage Organization i Media Files location SCENARIO 1 SCENARIO 2 SCENARIO 3 “M3U playlists files” “MultiMediaLinQ Music Folder” “ROOT Music Folders” PRIORITY PRIORITY 1 ROOT PRIORITY 2 ROOT multimedialinq m3u Playlist1.m3u Playlist2.m3u ROOT multimedialinq Playlist 1 Song 1 Song 2 music Playlist 1 Song 1 Song 2 Song X Playlist 2 Song 1 Song 2 PlaylistX.
Head Unit Controls CD-MP3 Changer Emulation Source Selection Select desired source by pressing the DISC button on the head unit or MODE on the steering wheel control. Head Unit: To switch between the unit sources you need to use “DISC” or “CD” button on the radio (Diagram below assumes factory CD changer is present).
VML controls CD-MP3 Changer Emulation TRACK+ and TRACK- Select the desired track (Maximum number of tracks is 999 for CD-MP3 changer Emulation mode). You can fast switch through tracks by repeatedly pressing the [TRACK+] / [TRACK-] button. The track will change after a brief pause when you stop pressing the button. NOTE: If a playlist only contains one track, the [TRACK+] / [TRACK-] buttons will not function. FOLDER+ and FOLDER- Select the desired playlist (Maximum number of playlists is 999).
VML controls CD-MP3 Changer Emulation Category (Playlist, Artist, Album) Selection FLD. RAND + FOLDER+ and FOLDER- OR FLD. RAND + DISC+ and DISC- Select the desired browsing category Playlist, Artist or Album (). NOTE: If selected browsing category has playable files/songs in it, VML will start playing selected category. Otherwise VML will look for next available category. If no category is available to be selected, VML will continue to play current song.
Head Unit Controls CD/MD Changer Emulation Source Selection Select desired source by pressing DISC button on the head unit or MODE on the steering wheel control. Head Unit: To switch between the unit sources you need to use “DISC” or “CD” button on the radio (Diagram below assumes factory CD changer is present). CD CD1 CD VML CD1 VML MD1 CD OR CD VML MD1 VML Steering Wheel control: To switch between the unit and radio you need to use the “MODE” button on the steering wheel control.
VML controls CD/MD Changer Emulation TRACK+ and TRACK- Select the desired track (Maximum number of tracks is 999 for CD changer and MD changer Emulation mode). You can fast switch through tracks by repeatedly pressing the [TRACK+] / [TRACK-] button. The track will change after a brief pause when you stop pressing the button. NOTE: If a playlist only contains one track, the [TRACK+] / [TRACK-] buttons will not function.
VML controls CD/MD Changer Emulation Category (Playlist, Artist, Album) Selection DISC RAND + DISC+ and DISC- Select the desired browsing category Playlist, Artist or Album. NOTE: If selected browsing category has playable files/songs in it, VML will start playing selected category. Otherwise VML will look for next available category. If no category is available to be selected, VML will continue to play current song.
What You need to know i 12 IMPORTANT The VML Audio Player supports playback of MP3 and WAV files from a USB Mass Storage Device or optional automotive grade internal Hard Drive (see details below). i What is MP3? MP3 (MPEG-1 Audio Layer 3) is a digital audio encoding format using a form of lossy data compression. “MPEG Layer 3 audio coding technology licensed from Fraunhofer IIS and Thomson.
