Installation and User Guide Vaddio™ AV Bridge™ CONFERENCE HD Media Streaming Solution with Audio Inputs and Outputs for UC Conferencing Applications Part Numbers: 999-8215-000: AV Bridge CONFERENCE (North America) 999-8215-001: AV Bridge CONFERENCE (International) © 2014 Vaddio - All Rights Reserved.
AV Bridge CONFERENCE Inside Front Cover - Blank Vaddio AV Bridge CONFERENCE - Document Number 342-0767 Rev A Page 2 of 32
AV Bridge CONFERENCE Table of Contents Overview .................................................................................................................................................................... 4 Unpacking .................................................................................................................................................................. 5 Anatomy of the AV Bridge CONFERENCE .....................................................................................
AV Bridge CONFERENCE Overview The Vaddio AV Bridge CONFERENCE is a room based HD Media Streaming solution enabling IP or USB streaming. Like the original AV Bridge, it’s an appliance that “bridges” the room’s analog audio and video into a computer (PC or Mac) for UC applications, but with one important distintction.
AV Bridge CONFERENCE Unpacking Carefully remove the device and all of the parts from the packaging. Unpack and identify the following parts: Image AV Bridge CONFERENCE shown with provided Rack Ears Attached For P/N 999-8515-000 AV Bridge CONFERENCE System (North America) One (1) 998-8515-000 AV Bridge CONFERENCE HD Audio/Video Encoder One (1) Pair of Rack Ears One (1) 18 VDC, 2.75 Amp Switching Power Supply with AC Power Cord for North America One (1) 6’ (1.83m) USB 2.
AV Bridge CONFERENCE Image: Rear Panel Connector and Features ➊ ➋ ➌ ➍ ➎ ➏ ➑ ➐ 1) Power Connector: 5.5mm OD x 2.5mm ID, center positive coaxial connector for supplying power to the device. Use with provided desktop 18 VDC, 2.75 Amp power supply. 2) DIP Switches: Used to reset device to factory defaults. Setting all dip switches to the off-position will reset the unit to factory defaults on the next power cycle. User will lose all programmed configurations on the factory default operation.
AV Bridge CONFERENCE Diagram: The simple way to look at AV Bridge CONFERENCE The AV Bridge CONFERENCE “bridges” the A/V signals into the PC for applications like UC conferencing, lecture capture, recording, storage for later playback, editing, distribution and other programs that can manipulate the A/V content. With the 2-way analog audio, the AV Bridge CONFERENCE is perfect for most UC conferencing applications. Cessna 172 (Still not included) A/V Bridge CONFERENCE (It‘s still a Metaphor) USB 2.
AV Bridge CONFERENCE Step-by-Step Installation Instructions To install the AV Bridge CONFERENCE, follow the steps below to attach various pieces of equipment. Step 1: Plug in the 18VDC, 2.75 Amp power supply included with the AV Bridge CONFERENCE system package. The front panel LCD display will illuminate blue when the power is applied. The menu is now active and ready for configuration. Step 2: Connect the Video Content Source(s) to the AV Bridge CONFERENCE for USB 2.0 Streaming.
AV Bridge CONFERENCE Compatibility: Operating Systems Apple OS X (10.7 and above) Windows XP w/Service Pack 3 with known issues and errata Windows 7 Linux Evolving Compatibilities: As more UC soft-client and lecture capture programs are released and gain popularity, Vaddio will provide a continuing research and development effort to ensure the compatibility with other manufacturer’s products. USB 2.0 The USB 2.
AV Bridge CONFERENCE System Configuration and Programming Front Panel Menu System The front panel menus allow some basic configuration of the AV Bridge CONFERENCE and serves to display the important system parameters and settings.
AV Bridge CONFERENCE Network Settings The Network settings is a “read only” message representing the current IP addresses defined for the AV Bridge CONFERENCE by the webpages. Properties displayed include: Mac Address: IP Address: Subnet Mask: IP Gateway: Net Type: DHCP Hotkey Buttons and Indicators A number of common user controls have been included on the front panel for quick access by the user during a streaming session.
AV Bridge CONFERENCE Screen Shot: A/V Configuration Web Page Choose video input and video mute pattern, audio input and audio processing desired, and the connectivity speed (Note: the baud rate is defaulted at 38400). Video mute and audio mute can be selected (when selected the mute buttons will turn red), the gain (input) and volume control (output) of the audio is available to adjust as well. In each section, after a change is made click on Save if the intent is to keep any parameter change.
AV Bridge CONFERENCE Screen Shot: Streaming The Streaming Page allows an administrator to set up the type of streaming, audio delay, USB streaming settings and USB terminal type, color space, IP streaming settings, video speed and quality, protocol and path. ➊ ➲ ➋ ➌ ➍ ➎ ➏ The Streaming Menu: 1) The USB STREAMING MODE is set for either USB 2.0 streaming (MJPEG/PCM) or IP streaming (H.264/AAC) however, the AV Bridge CONFERENCE cannot stream both at the same time.
AV Bridge CONFERENCE Screen Shot: Room Labels The room Labels menu allows the admin to label the company name, room name, room phone and help phone on a per camera basis. The labels appear on every page at the top/middle of the page. Simply enter the room information and click Save. ➲ ➲ ➲ ➲ Screen Shot: Network Configuration - DHCP The Networking page is for configuring the AV Bridge CONFERENCE IP address. It supports either DHCP or Static IP address along with a Host Name.
AV Bridge CONFERENCE Screen Shot: Network Configuration - Static IP To set up the Ethernet Port to Static IP address, click on Static and enter the IP address, the subnet mask and the gateway and click on save. Double check the data prior to clicking Save. ➲ ➲ ➲ ➲ Screen Shot: Security The admin account has a password for login security. The admin account will always require a password entry for login to the administrator pages on the AV Bridge CONFERENCE.
AV Bridge CONFERENCE Screen Shot: Diagnostics The diagnostics function within the AV Bridge CONFERENCE is for advanced troubleshooting. It includes logging capabilities of key events and error reporting during normal operations. The internal logging function is setup as a revolving FIFO with estimated internal storage capabilities for up to one week. The administrator has the ability to clear the log or download the log to a local PC.
AV Bridge CONFERENCE Screen Shot: System Confirmation Messages The system will provide user notification and ask for confirmation to enter the firmware/software update process. A confirmation pop-up and warning is displayed after clicking on “Begin Firmware Update…” Click Continue to proceed. ➲ ➲ Screen Shot: Firmware Update in Progress The in progress notification will prompt the administrator for patience. Please do not interrupt the Firmware Update while in process.
AV Bridge CONFERENCE Screen Shot: Help Menu The Help menu provides general information on the AV Bridge CONFERENCE to assist the administrator in configuration and programming of the device. The Help also includes information on the current firmware release loaded on the device. Click on the support for product related documentation from the Vaddio website. ➲ ➲ ➲ TECHNICAL SUPPORT NOTE: Please work with your Network Administrator prior to calling Vaddio for technical support.
AV Bridge CONFERENCE Warranty Information (See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details): Hardware* Warranty: Two (2) year limited warranty on all parts and labor for Vaddio manufactured products. Vaddio warrants its manufactured products against defects in materials and workmanship for a period of two years from the day of purchase, to the original purchaser, if Vaddio receives notice of such defects during the warranty.
AV Bridge CONFERENCE Compliance and CE Declaration of Conformity - AV Bridge CONFERENCE Compliance testing was performed to the following regulations: FCC 47 CFR Part 15, Subpart B ICES-003, Issue 4: 2004 EN-55011:2007 + A2: 2007 EN 55022:2006 + A1: 2007 CISPR 22:1997 IEC 60950-1:2005 (Second Edition); Am 1:2009 EN 60950-1:2006+A11:2009+A1:2010+A12:2011 EMC Directive 2004/108/EC Class A Class A Class A Class A Class A Safety Safety Class A FCC Part 15 Compliance This equipment has been tested and found t
AV Bridge CONFERENCE General Specifications Part Numbers Firmware Release 1.0.0 Supported Media Players Video Inputs & Supported Video Resolutions: Video Processing Analog Audio Input Analog Audio Output Audio Processing USB 2.
AV Bridge CONFERENCE Appendix 1: Connectors Pin Outs RS-232 on AV Bridge CONFERENCE Baud Rate: Selectable 9600, 19.2, or 38.4 kbps NOTE: The Default Baud Rate is 38.4 kbps Pin # 1 2 3 4 5 6 7 8 RS-232 Port Unused Unused Unused Unused Unused GND TXD RXD The DE-15 video port will accept either RGBHV or YPbPr video formats.
AV Bridge CONFERENCE Appendix 2: Vaddio Serial Command API The Vaddio Serial Command protocol is a high level text based command line interface supported on the RS-232 port or via Telnet session on the AV Bridge CONFERENCE. Format: The AV Bridge CONFERENCE command application protocol interface is intended to allow external controllers such as AMX or Crestron to control the device.
AV Bridge CONFERENCE Command List (Command Line Interface Shell) Audio Input NAME audio input - Gets or sets the current audio input source SYNOPSIS audio input {get|balanced|unbalanced} DESCRIPTION Method used to get or set the current audio input source OPTIONS get Get the current audio input balanced Set audio input to balanced unbalanced Set audio input to unbalanced EXAMPLES audio input get input: balanced Returns the current audio input ---audio input unbalanced OK Sets the audio input to u
AV Bridge CONFERENCE Audio Volume NAME audio volume - Gets or sets the current audio gain (input/capture) and volume (output/playback) SYNOPSIS audio volume {get|up|down|set } DESCRIPTION Method used to get or set the current audio volume OPTIONS get Get the current audio volume up Increment audio volume one step down Decrement audio volume one step set Set the audio volume level.
AV Bridge CONFERENCE Help NAME help - display an overview of the CLI syntax SYNOPSIS help DESCRIPTION Display an overview of the command line syntax History NAME history - command history SYNOPSIS history [limit] DESCRIPTION Since many of the programs read user input a line at a time, the command history is used to keep track of these lines and also recall historic information HISTORY NAVIGATION The command history can be navigated using the up and down arrow keys.
AV Bridge CONFERENCE Network Settings NAME network settings - get current network settings SYNOPSIS network settings {get} DESCRIPTION Method used to get the current network settings of the device OPTIONS get Get the current network settings for the machine EXAMPLES network settings get MAC Address: 00:04:a3:85:0a:ee IP Address: 10.10.8.116 Netmask: 255.255.255.0 Gateway: 10.10.8.
AV Bridge CONFERENCE Streaming Mode NAME streaming mode - Gets or sets the current streaming mode SYNOPSIS streaming mode {get|usb} DESCRIPTION Method used to get or set the current streaming settings OPTIONS get Get the current streaming mode usb Set the current streaming mode to USB EXAMPLES streaming mode get mode: usb Returns the current streaming mode ---streaming mode usb OK Sets the streaming mode to usb Streaming Quality NAME streaming quality - Gets or sets the current streaming qua
AV Bridge CONFERENCE Streaming NAME streaming - Gets or sets the current streaming settings SYNOPSIS streaming {mode {get|usb|ethernet} | resolution {get|1080p|720p|4cif|480p|cif} | quality {get|low|standard|high}} DESCRIPTION Method used to get or set the current streaming settings OPTIONS mode Get or set the current streaming mode resolution Get or set the current streaming video resolution quality Get or set the current streaming video frame rate and bit rate EXAMPLES streaming mode get mode:
AV Bridge CONFERENCE Video Mute NAME video mute - Gets or sets the current video mute SYNOPSIS video mute {get|on|off|toggle} DESCRIPTION Method used to get or set the current video mute OPTIONS get Get the current video mute on Set video mute to on off Set video mute to off toggle Toggle the video mute EXAMPLES video mute get mute: off Returns the current video mute ---video mute on OK Turns the video mute on ---video mute off OK Turns the video mute off Video NAME video - Gets or sets the cur
AV Bridge CONFERENCE Inside Back Cover - Mostly Blank Vaddio AV Bridge CONFERENCE - Document Number 342-0767 Rev A Page 31 of 32
AV Bridge CONFERENCE Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2014 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice or obligation. Vaddio and AV Bridge are trademarks of Vaddio. All other trademarks are property of their respective owners. Document A, SD: 67949.8 Vaddio342-0767 AV BridgeRev.
