Manual

ManualsBrandsVaddio ManualsAudioAutoTrak 2.0 EasyTALK Wireless Audio Interface

Optional EasyTalk™ Wireless Audio

Interface for AutoTrak™ 2.0

Part Numbers:

999-7230-000 North America

999-7230-001 International

The Optional EasyTalk AutoTrak 2.0 Wireless Audio Interface (above) works with

existing AutoTrak 2.0 IR Lanyard with a built-in professional quality, unidirectional

microphone mounted in the Central Medallion and the rechargeable lithium-ion

battery pack and transmitter inside the Belt Pack. (The IR Lanyard and

rechargeable Belt Pack are sold as part of the AutoTrak 2.0 System).

Installation and User Guide

Summary of content (12 pages)

PAGE 1
Installation and User Guide Optional EasyTalk™ Wireless Audio Interface for AutoTrak™ 2.0 Part Numbers: 999-7230-000 North America 999-7230-001 International The Optional EasyTalk AutoTrak 2.0 Wireless Audio Interface (above) works with existing AutoTrak 2.0 IR Lanyard with a built-in professional quality, unidirectional microphone mounted in the Central Medallion and the rechargeable lithium-ion battery pack and transmitter inside the Belt Pack.
PAGE 2
Optional AutoTrak 2.0 EasyTalk Wireless Audio Interface Inside Front Cover - Blank Optional AutoTrak 2.
PAGE 3
Optional AutoTrak 2.0 EasyTalk Wireless Audio Interface Overview: The optional EasyTalk Wireless Audio Interface System expands audio capabilities for the AutoTrak 2.0 Automated camera tracking system. Key features of the EasyTalk Wireless Audio Interface include:  HD Wireless Link with Adaptive Frequency Hopping (AFH) for interference free operation.  USB Audio Output on Wireless Audio Interface allowing connection to a PC for Skype Applications.
PAGE 4
Optional AutoTrak 2.0 EasyTalk Wireless Audio Interface Unpacking: Carefully remove all of the parts for the Optional EasyTalk Wireless Interface for the AutoTrak 2.0 from the packaging. The System 999-7230-000 for North America includes:  One (1) 998-7230-000 EasyTalk AutoTrak 2.0 Wireless Audio Receiver  One (1) 2.39GHZ-2.51GHz ½-Wave, 3.5” RP-SMA Right Angle, Antenna  Two (2) 342-0341 Rack Ears  12 VDC, 1 Amp Power Supply with North American Power Cord  One (1) 6’ (1.83m) USB 2.
PAGE 5
Optional AutoTrak 2.0 EasyTalk Wireless Audio Interface The Rear Panel Connections: ① ② ③ ④ ⑤ ⑥ ⑦ 1) 12 VDC, 1.0 Amp Power Connector: The 5.5mm OD and 2.5mm ID coaxial power connector should be plugged into the PowerRite power supply provided by Vaddio. Use of any unauthorized power supplies will void any and all warranties.
PAGE 6
Optional AutoTrak 2.0 EasyTalk Wireless Audio Interface 4) GPIO Port: The GPIO Port provides the ability to interface with external control systems. Inputs are logic level low. Outputs are open collectors. Pin 1 2 3 4 5 6 7 5) Function Power (12 VDC) Mute Toggle (Input) Mute Status (Output) Volume Up (Input) Volume Down (Output) Not Used Ground USB Type B Connector: This connector is used to interface with the Host PC for soft-client codec type applications.
PAGE 7
Optional AutoTrak 2.0 EasyTalk Wireless Audio Interface Step 9: To replace the removable battery cover, start sliding the cover on at the bottom of the battery pack compartment and slide cover upward to the top of the small opening until the cover latches back into place. Step 10: Adjust the mic volume by using the + (plus) and – (minus) buttons on the front panel of the Wireless Receiver and set the audio levels on the audio system to taste.
PAGE 8
Optional AutoTrak 2.0 EasyTalk Wireless Audio Interface Compliance and CE Declaration of Conformity: EasyTalk AutoTrak 2.0 Wireless Audio Interface Compliance testing was performed to the following regulations:              FCC Part 15 Subpart B FCC Part 15, Subpart C Section 15.247 FCC Part 15, Subpart C Section 15.207 Industry Canada RSS-210 Issue 8 Industry Canada RSS-Gen Issue 3 Class A Class A Class A Class A IEC 60950-1/A1: 2009 Safety ETSI EN 300 328 V1.7.
PAGE 9
Optional AutoTrak 2.0 EasyTalk Wireless Audio Interface Warranty Information: (See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details): Hardware* Warranty: One year limited warranty on all parts. Vaddio warrants this product against defects in materials and workmanship for a period of one year from the day of purchase from Vaddio.
PAGE 10
Optional AutoTrak 2.0 EasyTalk Wireless Audio Interface Appendix 1: Pin-outs and Stuff RS-232 Control: DE-9 Female (DB-9 for convention): Communication Specification Communication Speed: 9600 bps or 38,400 Stop bit: 1 Data bits: 8 Parity: None No Flow control Control Port - RS-232 on DE-9 Female Connector PIN# Signal 2) TXD 3) RXD 5) GND All other pins - Unused AutoTrak II Audio User Serial Command Set: The EasyTalk AutoTrak 2.
PAGE 11
Optional AutoTrak 2.
PAGE 12
Optional AutoTrak 2.0 EasyTalk Wireless Audio Interface 9433 Science Center Drive, Minneapolis, MN 55428 Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2012 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio, AutoTrak, and EasyTalk, are trademarks of Vaddio. All other trademarks are property of their respective owners. Document 342-0387 Rev.