USER’S MANUAL REGISTER NOW AT V-MODA.
CAUTION If serial number on the product, on manual cover or bottom of packaging is missing or defaced, please return to retailer immediately.
V-MODA.com/Manuals english V-MODA.com/Manuals español V-MODA.com/Manuals français V-MODA.com/Manuals italiano deutsch 한국어의 V-MODA.com/Manuals V-MODA.com/Manuals 简体中文 要获得说明书的打印件, 请访问 V-MODA.com/Manuals 繁體中文 要獲得說明書的打印件, 請訪問 V-MODA.com/Manuals 日本語 本取扱説明書の電子版を以下のページからダウンロード・ プリントアウトすることができます V-MODA.
ROCK SAFELY Enjoy your music responsibly. According to the American Speech-Language-Hearing Association (ASHA), “listening to personal music players, stereos and headphones at high volumes for extended periods of time can directly result in lifelong hearing loss”. At V-MODA we are dedicated to providing an enjoyable listening experience, but we also care greatly about your personal health and safety.
WELCOME Welcome to V-MODA, the music lifestyle. We sincerely hope you enjoy our Remix speaker, the pinnacle of sound and quality design. With the essence of music at the foundation of all we do, we have precisely engineered our Remix speaker to provide an enjoyable and natural sound signature, which invokes the sense of listening to your music live. Play Hard. Rock Harder. Package Contents 1 2 4 1. 2. 3. 4.
CHARGING THE SPEAKER The Remix speaker has a built-in lithium-ion rechargeable battery. Fully charge the Remix speaker for 3 hours before using it for the first time. Note that Remix is equipped with USB-A to USB-C charging cable for faster and safer charging. Do not use any other type of charging cables to charge the Remix speaker.
TURNING ON/OFF THE REMIX SPEAKER – BATTERY STATUS When turning on the Remix speaker, the orange LED indicates the battery level. 1. Press the button to turn on the Remix speaker. Power on tone plays and the orange LED flashes a number of times based on the battery level: 1s 1s 1s 1s 1s 1s • Battery 100-81%: orange LED flashes 4 times • Battery 80-61%: orange LED flashes 3 times • Battery 60-41%: orange LED flashes twice • Battery <40%: orange LED flashes once 3min 2. Press the turn off.
WIRELESS MODE TOP VIEW Status LED Microphone ON/OFF Volume down Multifunction Pairing Volume up
BACK VIEW AUX IN USB-C port VAMP port / AUX-OUT + LED
PAIRING AND CONNECTING WITH A NEW BLUETOOTH DEVICE When pairing with one, two or more Bluetooth devices, perform the following pairing procedure every time you pair a new device. 1. Press the button to turn on the Remix speaker. Power on tone plays, battery level orange LED flashes, then white LED flashes twice every second while the VAMP orange LED is on. 2. Press and hold for 3 seconds to connect the new Bluetooth device.
CONNECTING WITH A PAIRED BLUETOOTH DEVICE When pairing with one, two or more Bluetooth devices, perform the following procedure every time you connect the Remix speaker with an already paired device. 1. Press the button to turn on the Remix speaker. Power on tone plays, battery level orange LED flashes a number of times based on the battery level. 2. Ready to rock. When the Bluetooth connection is established, connected tone plays and white LED on the Remix speaker stays lit .
LISTENING TO MUSIC, TRACKS CONTROL AND VOICE ASSISTANT Start playback on the paired/plugged device and adjust the volume with the and buttons on the Remix speaker MAX Press and hold max volume for up to 10 seconds to reach MIN Press and hold min volume for up to 10 seconds to reach 10 SEC 10 SEC
Press once to play and pause Press twice for next track Press 3 times for previous track 1x 2x 3x Press and hold for 3 seconds to summon Voice Assistant such as Siri/OK Google 3 SEC Track controls may vary based on device and settings.
MAKING A CALL / RECEIVING A CALL ANSWER A CALL Press once to answer (music pauses automatically) 1X REFUSE / HANG UP To refuse an incoming call or to hang up an existing call, press and hold for 2 seconds, then release 2 SEC
CALL ON HOLD 1X Press once to put the ongoing call on hold and connect to the second incoming call; long press for 2 seconds to connect the second call and hang up the first call; short press twice to refuse a second call while attending one Making a call/ Receiving a call functions do not work in wired mode.
WIRED MODE When connecting an audio device via AUX IN, plug in the device with the included audio cable. 1. Plug in an audio device into Remix speaker’s AUX IN via V-MODA audio cable. 2. Press the button to turn on the Remix speaker. Power on tone plays, battery level orange LED flashes a number of times based on the battery level. 3. Ready to rock. When the AUX IN connection is established, both white LED and VAMP orange LED stay lit; audio device is ready to play.
VAMP MODE VAMP Mode transforms the Remix speaker into a headphone amplifier for stunning sound quality. 1. Plug in an audio device into Remix speaker’s AUX IN via V-MODA audio cable. 2. Press the button to turn on the Remix speaker. Power on tone plays, battery level orange LED flashes a number of times based on the battery level. Then white LED stays lit. 3. Plug in headphones into Remix speaker’s VAMP port via audio cable. 4. Press the button once to switch to VAMP mode. Orange LED stays lit. 5.
DAISY CHAIN MODE - BLUETOOTH Two or more Remix speakers can be linked together and play seamlessly via the same audio player. 1. Press the button to turn on the Remix speaker. Power on tone plays, battery level orange LED flashes a number of times based on the battery level. Then white LED stays lit. 2. Bluetooth connect Remix speaker 1 and audio player following the instructions on page 10. 3. Plug in Remix speaker 1’s VAMP and Remix speaker 2’s AUX IN. 4.
DAISY CHAIN MODE - BLUETOOTH SPEAKER 1 SPEAKER 2
DAISY CHAIN MODE - WIRED 1. Plug in an audio device and Remix speaker 1 via V-MODA audio cable. 2. Plug in Remix speaker 1’s VAMP and Remix speaker 2’s AUX IN. 3. Press the button to turn on both Remix speaker 1 and Remix speaker 2. Power on tone plays, battery level orange LED flashes a number of times based on the battery level. Then white LED stays lit on both Remix speakers. 4. Remix speakers are now in “daisy chain” mode.
DAISY CHAIN MODE - WIRED SPEAKER 1 SPEAKER 2
ONE REMIX SPEAKER, TWO AUDIO DEVICES The Remix speaker can be connected to two audio devices at the same time and play alternatively from both audio devices. 1. Bluetooth connect Remix speaker and audio player 1 following the instructions on page 10 1 2. Bluetooth connect Remix speaker and audio player 2 following the instructions on page 10 3. Re-connect Remix speaker and audio player 1 by using the player’s Bluetooth devices pairing sections 4.
OTHER USEFUL FUNCTIONS RESET PAIRED DEVICES HISTORY To reset paired devices history press and hold for 3 seconds. White and orange LEDs flash alternatively twice. HOLD 3sec POWER SAVING MODE If no device is paired with the Remix speaker for 3 minutes, white LED starts to flash once every 3 seconds, VAMP orange LED stays lit for power saving mode. To resume the Remix speaker simply press the button.
CONNECTION OUT OF RANGE If the audio device is outside the connection range “Out of Range” tone plays every 5 seconds for 2 minutes, white LED flashes twice per second and VAMP orange LED stays lit until the device automatically connects when back within the connecting range. If no device to be connected is detected for 2 minutes, speaker will switch to power saving mode. HOW TO CHECK YOUR BATTERY STATUS To easily check the Remix speaker battery status, hold the button for 2 seconds.
USING YOUR REMIXRINGS AND 3D PRINTED CUSTOM PARTS With the 3D printed custom sides, housing and grill you can revolutionize your Remix speaker and forge your own personal relic which will be 3D sculpted in Milan and 3D printed in NYC. 1. Install RemixRings to ensure that 3D printed sides are stable 2. 4x RemixRings are included with the Remix speaker to change the look of it 3. RemixRings cover the screws on the Remix speaker and ensure stability when the Remix speaker is put on whatever type of surface 4.
USING YOUR 3D PRINTED CUSTOM SIDES (SOLD SEPARATELY) 1. Slide RemixRings onto their housing 2.
USING YOUR 3D PRINTED CUSTOM HOUSING (SOLD SEPARATELY) 1. Remove the RemixRings from their housing if present 2.
3. Remove the pre-installed housing 4. Install and adjust the 3D printed custom housing onto the back of the Remix speaker 5.
USING YOUR 3D PRINTED CUSTOM GRILL (SOLD SEPARATELY)
USING YOUR 3D PRINTED CUSTOM GRILL (SOLD SEPARATELY) 1. Remove the RemixRings from their housing if present 2. Remove screws from the surface of Remix speaker 3. Remove the pre-installed housing 4. Remove the pre-installed grill 5. Install and adjust the 3D printed custom grill onto the front of the Remix speaker 6. Install and adjust the housing (3D printed custom or the included one) onto the back of the Remix speaker 7.
Troubleshooting If you are experiencing trouble with your Remix speaker, please refer to the troubleshooting guidelines below. If the problem persists, please contact the V-MODA Six Star Service at V-MODA.com/Support or 1.888.VMODA.LA.
TROUBLE SUGGESTIONS Receiving no audio or low quality audio from a audio source - Audio and video do not match Check the battery Check the pairing Make sure the audio source is playing Make sure the volume on the device is not muted or turned down Reboot the source/device Turn off the Remix speaker and turn it on again Reset paired devices history of the Remix speaker Try streaming from another device or select another track Move the device and Remix speaker closer (max 33 feet or 10m) Keep away from a
TROUBLE SUGGESTIONS No audio (in wired mode) Make certain the audio device and the Remix speaker jacks are free of debris and that the cable is securely connected. Lack of or excessive bass or treble (in wired mode) Turn off any audio enhancement features on audio device. Make sure cable is firmly connected to the Remix speaker and device. If the problem persists, try another cable. Uneven Sound (in wired mode) Make sure cable is firmly connected to the Remix speaker by ensuring male 3.
TROUBLE SUGGESTIONS Remix speaker will not charge - Make sure the Charging cable and source are functioning properly Make sure both USB plugs are firmly connected into their sockets Disconnect and reconnect the USB charging cable If charging with your computer, be sure the USB port is powered and remember to plug in your computer CLEANING YOUR REMIX SPEAKER To clean the exterior surface of the Remix speaker, you can wipe it using a soft and dry cloth.
Limited Warranty For a period of one (1) year from the date of retail purchase by the original end-use purchaser, V-MODA warrants that this product is free from any defects in manufacturing, materials and workmanship, under the following conditions: • V-MODA will repair or replace the product within a reasonable period of time and free of charge for one (1) year from the date of retail purchase by the original end-use purchaser.
• This Limited Warranty does not cover defects resulting from cosmetic damage, acts of God, misuse, accidents, commercial use, unauthorized alteration or modification of the product, improper connection, improper use or attempted repair by unauthorized distributors or resellers. • This warranty is void if the label bearing the serial number has been removed or defaced. • To obtain service under this limited warranty, visit V-MODA.
• This limited warranty gives you specific legal rights, and you also may have other rights that vary from state to state or country to country. Some places do not allow limitations on implied warranties or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
V-MODA Immortal Life Program - lifetime 50% discount (Available in US only) We do not judge. If you abuse your speaker crowdsurfing, stage diving, spelunking or otherwise, the V-MODA Immortal Life Program has your back. All we ask is that you send the speaker (or what is left of it) to us and we will email you a 50% off coupon towards a comparable product from V-MODA.com. Visit V-MODA.com/Support, e-mail support@V-MODA.com or call 1.888.VMODA.
CAUTION If serial number on the product, on manual cover or bottom of packaging is missing or defaced, please return to retailer immediately.
COMPLIANCES NOTE: This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Changes or modifications not expressly approved by V-MODA could void the user’s authority to operate this equipment. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
V-MODA Milano Design ©2017 V-MODA. All rights reserved. V, V-MODA, Remix and VAMP are registered trademarks of V-MODA, LLC. U.S. patent pending application no. 14/740107. iPhone®, iPad®, iPod® are trademarks of Apple Inc., registered in the U.S. and other countries. The trademark “iPhone” is used with a license from Aiphone K.K. Android is a trademark of Google Inc. and is in no way affiliated with V-MODA. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
PLEASE DO NOT RETURN TO RETAILER For any issues relating to your V-MODA product, please contact our Six Star Service directly. visit email V-MODA.com/SUPPORT support@V-MODA.com twitter @VMODASixStar skype call V-MODASixStar 1.888.
ACTIVATE YOUR WARRANTY AND 50% IMMORTAL LIFE PROGRAM REGISTER NOW AT V-MODA.