verza manual v1.
PRACTICE SAFE SOUND Enjoy your music responsibly by practicing safe sound. Listening to headphones at too high of volumes for extended periods of time will result in permanent hearing loss. V-MODA Faders by Ear Armor helps prevent tinnitus and hearing loss at events such as clubs, concerts, music practice and races. Reveal more at V-MODA.com/FADERS.
Table of Contents Before Using Compatible Models of iPod/iPhone and Computer (OS) Quiqcard – Quick Start Name and Function of Each Part Front panel Rear panel Side panel Checking the Remaining Battery of VERZA Charging the Built-in Battery of VERZA Disposing of the battery Connecting VERZA with iPod/iPhone Listening to Music in iPod/iPhone in VERZA “VAMP” Mode Charging iPod/iPhone by the Built-in Battery in VERZA "Ϟ +VAMP" Mode Connecting VERZA with Computer.
Before Using Make sure to confirm the contents in the package before using. Contact the retailer where the product was purchased if there is anything missing. Compatible Models of iPod/iPhone and Computer (OS) iPod nano (Sixth generation) iPod touch (Fourth generation) iPhone 3GS iPhone 4 iPhone 4S iPhone 5 PC, Mac (OS) Windows: Mac: OS X v10.5 Leopard or later Android devices with USB audio output verza manual v1.
QuiqCard – Quick Start verza manual v1.
Name and Function of Each Part Front panel 1. Toggle switch (1) Set the functions. iAMP Function to listen to the music in iPod/iPhone. USB DAC Function to connect VERZA with computer or devices with USB audio. 2. To listen to the music after connected. Toggle switch (2) Set the modes. VAMP Listen to the music in iPod/iPhone with headphones (or speakers) using the AMP (amplifier) of VERZA.
4. Headphone output / S/PDIF output Headphone Connect stereo headphones (or speakers). output Optical / S/PDIF Connect the round optical digital connector. output The digital signal from iPod/iPhone is DD (Digital-to-Digital) converted and output as S/PDIF digital signal. By connecting to a device with digital input, audio source of iPod/iPhone gets output as high-quality sound at 48kHz/16bit. * It outputs at the sampling frequency set on computer when USB DAC is selected. Rear panel 5.
Side panel 8. 3D (3D surround) button (for iAMP mode only, refer to toggle switch (1)) Switches to the 3D mode when the button is pressed. 9. BATTERY / BASS button ・Checks the remaining battery or charging status when the button is pressed lightly. ・Switches to the BASS BOOST mode when the button is pressed and held down, and the toggle switch (2) is moved back and forth (only for headphone output). * Refer to "Setting Other Functions" (page 36) for the setting method of 3D and bass boost. 10.
Charging the Built-in Battery of VERZA The built-in battery of VERZA can be charged by connecting the USB port A connector of a computer with the USB micro B connector at the bottom of VERZA using the supplied USB to micro USB cable and by switching the toggle switch (2) on the front panel to "AMP" or "Ϟ +VAMP" mode. * When the built-in battery of VERZA has been fully charged, VERZA automatically starts charging iPod/iPhone. It takes approximately 5 hours to fully charge VERZA.
Disposing of the battery VERZA is using a lithium ion polymer battery. It is required to dispose the battery separately from the general household waste. Dispose the battery in accordance with the instructions (regulations) in your municipality. Connecting VERZA with iPod/iPhone Connect by inserting the Apple genuine dock connector USB cable supplied with iPod/iPhone securely into the USB connector (A terminal) of VERZA.
Listening to Music in iPod/iPhone in VERZA “VAMP” Mode 1. Turn on the power by the power switch volume knob and set the toggle switch (2) to "VAMP" position. 2. Once VERZA and iPod/iPhone are correctly connected (authenticated), the toggle switch LED turns on red or green. * If the toggle switch is blinking, iPod/iPhone may not be connected with VERZA at all, or it may not be correctly connected (authenticated).
Connecting VERZA with Computer To connect with computer, connect the supplied USB cable (micro B type) to the USB connector (USB micro B connecter) of VERZA. USB port of VERZA is at the rear panel. Synchronizing with iPod/iPhone and iTunes on Computer in VERZA "iSYNC" Mode Perform the following procedures. 1 2 3 1 Turn the power switch volume knob clockwise until it clicks to turn the power ON.
Listening to Music on Computer and devices with USB Audio in VERZA "USB DAC" Function Perform the following procedures. 2 1 3 1 Turn the power switch volume knob clockwise until it clicks to turn the power ON. 2 Set the toggle switch (1) to USB DAC position. 3 Set the toggle switch (2) to iSYNC position. 4 Connect VERZA and computer with the supplied USB cable.
Setting Other Functions Setting Volume Adjust the power switch volume knob. Setting Bass Boost Use Bass boost for enhancement in bass. Perform the following procedures. 1 Press and hold the BATTERY / BASS button. 2 The LED on the toggle switch (2) in the front panel starts blinking. 3 Move the toggle switch (2) back and forth between AMP and 4 Ϟ +VAMP positions once. The setting is completed when the LED on the toggle switch turns to either red or green and stays lit.
Setting 3D (3D surround) 3D mode provides a spacious sound. [ON] and [OFF] are switched back and forth by pressing the [3D] button. Setting Gain Gain of the headphones can be set by switching the GAIN toggle switch to either [HIGH] or [LOW]. It enables the headphones with different impedance to exert its full performance and to play in highquality sounds. * Do not apply force to the GAIN toggle switch to avoid breaking the switch.
Specifications verza manual v1.
Thank you for purchasing this V-MODA product. Please read this instruction manual thoroughly before using. Keep this manual available for your future reference. Disclaimer ● V-MODA is not responsible for any damage caused by natural disasters, fire not caused by V-MODA, actions or damages caused by third parties, criminal or accidental use by customers, or any other damages caused by other irregular usage.