4KEX100-KVM 4K HDBaseT Extender 100m with USB2.
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. AV Access Technology Limited assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. AV Access Technology Limited assumes no responsibility for any inaccuracies that may be contained in this document. AV Access Technology Limited also makes no commitment to update or to keep current the information contained in this document.
Important Safety Instructions Do not expose this device to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the device. Do not install or place this unit in a bookcase, built-in cabinet, or in another confined space. Ensure the unit is well ventilated. To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit’s ventilation openings with newspapers, tablecloths, curtains, or similar items.
Table of Contents Overview ............................................................................................................... 1 Package Contents .................................................................................................................. 3 Panel .......................................................................................................................................... 4 EDID Management ..........................................................................
Overview Overview 4KEX100-KVM is a 100m 4K HDBaseT 2.0 Extender which offers the distribution of uncompressed 4K@60Hz UHD video, Analog Stereo, power, RS232 and USB 2.0 up to 100m/330ft over a single Cat6 or above cable. With USB 2.0 pass-through and USB Host connector in TX, and USB Device connectors in RX, it provides remote source PC control with keyboard and mouse, interactive display operation, data transmission and USB streaming over distances up to 100m. Additional features include Bi-directional 3.
Overview High-speed USB 2.0, up to 480Mbps, pass through over HDBaseT up to 100m Bi-directional Analog Stereo, and RS232 pass-through over HDBaseT Independent DIP switch for EDID management Does not support HDCP www.avaccess.
Overview Package Contents Before you start the installation of the product, please check the package contents: 1 x Transmitter 4KEX100-KVM 1 x Receiver 4KEX100-KVM 1x 12 VDC 2A Power Supply 2 x Phoenix Male Connector (3.5 mm, 3 pins) 2 x Mounting Brackets (Pair) 1 x User Manual www.avaccess.
Overview Panel Transmitter Front Panel No. Name 1 Power LED Description ON: The transmitter is powered on. OFF: The transmitter is powered off. Flashing Slowly: 2 Status LED The transmitter is working properly. OFF: The transmitter is not working properly. 3 Link LED www.avaccess.
Overview Rear Panel No. Name Description 1 DC 12V 12V DC power input, threaded port for standard or locking connection 2 HDBT OUT Connects to HDBT IN port of receiver 3 RS232 RS232 pass through 4 HDMI IN Connects to an HDMI source 5 AUDIO Input: connects to audio devices Output: connects to audio devices 6 EDID DIP Switch for EDID Management 7 USB HOST Connects to USB-HOST device, such as PC www.avaccess.
Overview Receiver Front Panel No. Name 1 Power LED Description ON: The transmitter is powered on. OFF: The transmitter is powered off. Flashing Slowly: 2 Status LED The transmitter is working properly. OFF: The transmitter is not working properly. 3 Link LED www.avaccess.
Overview Rear Panel No. Name Description 1 DC 12V 12V DC power input, threaded port for standard or locking connection 2 HDBT IN Connects to HDBT OUT port of transmitter 3 RS232 RS232 pass through 4 HDMI OUT Connects to an HDMI Sink 5 AUDIO Input: connects to audio devices Output: connects to audio devices 6 USB DEVICE Connects to USB device such as keyboard, mouse, USB camera www.avaccess.
EDID Management EDID Management Please use the DIP Switch for EDID management: DIP Switch Position 1 Position 2 EDID Copy (Default) DOWN DOWN 3840 x 2160P@30Hz 2CH DOWN UP 1920 x 1080P@60Hz 2CH UP DOWN 1920 x 1200@60Hz 2CH UP UP Position 3 RESERVED Note: If EDID copy failed, it will use 1080p/2ch as EDID for input. www.avaccess.
Installation Instructions Installation Instructions Note: Disconnect all power supplies of all devices before installation. During the installation, connect or disconnect the cables gently. www.avaccess.
Specification Specification Transmitter Video Input 1 x HDMI Input Signal Type HDMI 1.4 with 4K Input Resolution Support 4096x2160@24/25/30/50/60Hz, 3840x2160@24/25/30/50/60Hz, 1080P, 1080I, 720P, 576p, 576i, 480p Input Video Level 0.5-1.0 V p-p Input DDC Signal 5V p-p Maximum Pixel Clock 297MHz Output 1 x HDBT Output Signal Type HDBT 2.
Specification General Operating Temperature 0°C to 45°C (32°F to 113°F) Storage Temperature -20°C to 70°C (-4°F to 158°F) Humidity 10% to 90%, non-condensing ESD Protection Human-body Model: ±8kV(Air-gap discharge)/ ±4kV(Contact discharge) Surge Protection Voltage: ±1 kV (Ten times respectively for the positive and negative voltage) Electrical Fast Transient/Burst Data communication cord: 1 kV Power cord : 2 kV Power Supply DC 12V 2A Power Consumption (Maximum) ≤12 W (pair) Device Dimension
Specification Video Output 1 x HDMI Output Signal Type HDMI 1.4 with 4K Output Resolution Support Video Impedance 4096x2160@24/25/30/50/60Hz, 3840x2160@24/25/30/50/60Hz, 1080P, 1080I, 720P, 576p, 576i, 480p 100 Ω Audio Audio input 3.5mm Mini jack, stereo Audio output 3.
Specification General Product Weight 0.46kg Certification CE, FCC, RoHS Cable Specifications Note: AV Access recommends use of straight-through Category cables wired to T568B standard. Cable Type Range Supported Video Cat5e 100m Up to 1080p@60Hz, 36bit (data rates lower than 5.3 Gbps or below 225 MHz TMDS clock) 90m 1080p@60Hz, 48bit 1080p@60Hz 3D 4K2K/30Hz/4:4:4 and 4K2K/60Hz/4:2:0 video formats Cat6/Cat6a/Cat7 www.avaccess.
Warranty Warranty Products are backed by a limited 3-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable. 1. The original serial number (specified by AV Access Technology Limited) labeled on the product has been removed, erased, replaced, defaced or is illegible. 2. The warranty has expired. 3.
AV Access Technology Limited V1.0.