4KEX100-L 100M HDMI HDBase-T Extender User Manual
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. AV Access Technology Limited assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. AV Access Technology Limited assumes no responsibility for any inaccuracies that may be contained in this document. AV Access Technology Limited also makes no commitment to update or to keep current the information contained in this document.
Important Safety Instructions Do not expose this apparatus to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. Do not install or place this unit in a bookcase, built-in cabinet, or in another confined space. Ensure the unit is well ventilated. To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit’s ventilation openings with newspapers, tablecloths, curtains, or similar items.
Table of Contents Overview ............................................................................................................... 1 Package Contents .................................................................................................................. 2 Panel .......................................................................................................................................... 3 Installation Instructions ................................................................
Overview Overview 4KEX100-L is a 100m low-cost 4K Full HDBase-T Extender with PoE and offers the distribution of uncompressed 4K@60Hz UHD video, HD audio, Ethernet, power, RS232, and two-way IR up to 100m/330ft along a single CatX cable. It features the transmission of uncompressed 4K@60Hz UHD video, HDCP 2.2 compatibility, power, Ethernet, bi-directional RS232 and IR control. Its bi-directional PoE technology ensures only one power adapter is needed at either TX or RX side to power both units.
Overview Package Contents Before you start the installation of the product, please check the package contents: 1 x 4KEX100-L TX 1 x 4KEX100-L RX 1 x Power Supply (DC 18V 1A) 1 x IR Emitter 1 x Wide-band IR Receiver (30KHz~50KHz) 2 x Mounting Brackets (Pair) 2 x Phoenix Connectors (3 Pin) 1 x User Manual www.avaccess.
Overview Panel Transmitter Front Panel 1 ID Name 1 Power LED 2 Description ON: The transmitter is powered on. OFF: The transmitter is powered off. ON: Transmitter and Receiver are linked. 2 Link LED Blinking: Connection exception OFF: No link Rear Panel ID Name Description 1 Power If transmitter is connected to power, receiver is adapter free. 2 HDBT OUT Connects to HDBT IN port of HDBT receiver 3 IR IN Connects to IR receiver Connects to a power supply www.avaccess.
Overview ID Name 4 IR OUT Description Connects to IR emitter 5 RS232 Connects to a device with RS232 port 6 HDMI IN Connects to HDMI source 7 Ethernet Connects to a device with Ethernet port Receiver Front Panel 1 ID Name 1 Power LED 2 Description ON: The receiver is powered on. OFF: The receiver is powered off. ON: Transmitter and Receiver are linked. 2 Link LED Blinking: Connection exception OFF: No link www.avaccess.
Overview Rear Panel ID Name Description Connects to a power supply 1 Power If transmitter is connected to power, receiver is adapter free 2 HDBT IN Connects to HDBT OUT port of HDBT transmitter 3 IR IN Connects to IR receiver 4 IR OUT Connects to IR emitter 5 RS232 Connects to a device with RS232 port 6 HDMI OUT Connects to HDMI display device 7 Ethernet Connects to a device with Ethernet port www.avaccess.
Installation Instructions Installation Instructions 1. Using quality HDMI cables, connect an HDMI source (such as Blu-ray, games console, satellite/cable TV, media server etc.) to HDMI IN of the Transmitter. 2. Connect a good quality CatX cable between the HDBT OUT of the Transmitter and the HDBT IN input of the Receiver. 3. Connect the HDMI display device (LED/LCD display or projector) to the HDMI OUT of the Receiver. 4.
Installation Instructions www.avaccess.
Specification Specification Transmitter Video Input 1 x HDMI IN Input Signal Type HDMI: HDMI1.4 with 4K@60Hz 4:2:0 8bit, HDCP 2.2 Input Video Level 0.5~1.0 Vp-p Maximum Pixel Clock 297MHz Output 1 x HDBT OUT Output Signal Type HDBase-T Input/Output Resolution Support 4096 x 2160@60/50/30/25/24Hz, 3840 x 2160@60/50/30/25/24Hz, 1080p@2@60/50/30/25/24Hz, 1080i, 720p, 576p, 576i, 480p, 480i Video Impedance 100 Ω Transmission Distance Cat 5e/6: 4K: max. 70m; 1080P: max. 100m Cat 6a/7: 4K: max.
Specification Humidity 10% to 90%, non-condensing Power Supply DC 18V 1A Power Consumption 11W (Pair) ESD Protection Human-body Model: ±8kV(Air-gap discharge)/ ±4kV(Contact discharge) Device Dimensions (W x H x D) 162mm x 15mm x 74.2mm/ 6.38" x 0.59" x 2.92" Product Weight 0.25kg Certification CE, FCC, RoHS Receiver Video Input 1 x HDBT IN Input Signal Type HDBase-T Input Video Level 0.5~1.0 Vp-p Maximum Pixel Clock 297MHz Output 1 x HDMI OUT Output Signal Type HDMI: HDMI1.
Specification Audio Supported Formats Stereo, LPCM 5.1, LPCM 7.
Warranty Warranty Products are backed by a limited 3-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable. 1. The original serial number (specified by AV Access Technology Limited) labeled on the product has been removed, erased, replaced, defaced or is illegible. 2. The warranty has expired. 3.
AV Access Technology Limited V1.0.