4KVC00 USB 3.
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. AV Access Technology Limited assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. AV Access Technology Limited assumes no responsibility for any inaccuracies that may be contained in this document. AV Access Technology Limited also makes no commitment to update or to keep current the information contained in this document.
Important Safety Instructions Do not expose this device to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the device. Do not install or place this unit in a bookcase, built-in cabinet, or in another confined space. Ensure the unit is well ventilated. To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit’s ventilation openings with newspapers, tablecloths, curtains, or similar items.
Table of Contents Introduction.......................................................................................................... 2 Overview .................................................................................................................................. 2 Features .................................................................................................................................... 2 Package Contents ......................................................................
Introduction Introduction Overview Thank you for purchasing this product. For proper installation and optimum performance, please read the instructions in this manual carefully. 4KVC00 is an HDMI to USB 3.0 (USB-C interface) video capture convertor, capable of supporting the HDMI2.0 standard 4K@60Hz resolution input and output, and provides up to 1080P@60Hz video capture to the computer. It will automatically detect the input video format and adjust to the appropriate output size and frame rate.
Introduction Package Contents Before you start the installation of the product, please check the package contents: Video Capture x 1 USB Type-C to USB 3.0 Type-A/Type-C Cable x 1 Mounting Brackets (with Screws) x 2 User Manual x 1 Panel 1 2 3 4 6 5 7 No. Name Description 1 HDMI In Connect to an HDMI source device such as a PC. 2 Power LED On/Off: The device is powered on/off. 3 USB-C Connect to a USB host device such as a PC.
Application Application Display Laptop 1 Connect an HDMI source device such as a PC to HDMI In port. Display Connect a USB-C/USB 3.0/ 3 USB 2.0 device to USB-C port such as a room PC, and connect the room PC to another display. Room PC 2 Connect an HDMI display device such as TV to HDMI Out port. Connect a Micphone 4 and a headset to Mic In port and Line Out port. Headset MIC www.avaccess.com 4 services@avaccess.
Specifications Specifications Video Input / Output Signal Type HDMI In/Out: HDMI 2.0 with 4K@60Hz 4:4:4 8bit USB-C Out: USB 3.0 (UVC and UAC standard) Input / Output Resolution HDMI In/Out: Up to 3840 x 2160@60Hz, including 4K@60Hz/4K@30Hz/1080P/720P USB-C Out: USB-C and USB 3.0: Up to 1080P@60Hz (YUV2 and MJPEG) USB 2.0: Up to 1080P@60Hz (MJPEG) Deep Color 4K@60Hz: Up to 8bit Maximum Data Rate HDMI: up to 18 Gbps USB-C & USB 3.0: 300~350 MB/s USB 2.
Audio & Video Settings Audio & Video Settings Audio Settings If there are audio problems such as the sound is discontinuous or noisy when using the device, the reason is the connected PC’s recording audio sample rate is different with the audio sample rate of input HDMI audio. Please refer to the following steps to solve the problem. Step 1: Right click audio volume button on the lower right corner of the PC connected to USB-C port. As shown in the following figure.
Audio & Video Settings Step 2: Select “Sound Control Panel” to open Sound control panel. Step 3: Click “Recording” to select “2-USB Audio Device” (the name may be “eEver USB Audio Device”) in this submenu, and then click “Properties” to open the properties panel. www.avaccess.com 7 services@avaccess.
Audio & Video Settings Step 4: Click “Advanced” in the properties panel, as shown in the following figure. In Advanced submenu, select format from drop down menu.
Audio & Video Settings Step 5: After the format is selected, click “Apply” to make the settings take effect. Important: After the settings are completed, please restart the recording software such as OBS. www.avaccess.com 9 services@avaccess.
Audio & Video Settings Video Settings Use OBS to Record Video Perform the wiring according to the wiring diagram of “Application” section. And ensure the software “OBS” is installed on the PC connected to USB-C port. Step 1: Click “+” to select “Video Capture Device” in the submenu. www.avaccess.com 10 services@avaccess.
Audio & Video Settings Step 2: Create a new name in the following window, and then click “OK” to enter the next interface. www.avaccess.com 11 services@avaccess.
Audio & Video Settings Step 3: Select “eEver USB Video Device” (the name may be “2-USB Video Device”) on “Device” tab. Step 4: Select “Custom” on “Resolution/FPS Type” tab. www.avaccess.com 12 services@avaccess.
Audio & Video Settings Step 5: Select “1920x1080” on “Resolution” tab. Note: HDMI Input Resolution OBS Resolution Choice 720P 1280x720 1080P (recommended) 1920x1280 4KP30 4KP60 (recommended) www.avaccess.com 13 services@avaccess.
Audio & Video Settings Step 6: Select “Output desktop audio (WaveOut)” on “Audio Output Mode” tab. Step 7: Click the check box in front of “Use custom audio device” to set it to enable. www.avaccess.com 14 services@avaccess.
Audio & Video Settings Step 8: Select “eEver USB Audio Device” (the name may be “2-USB Audio Device”) on “Audio Device” tab. And then click “OK”. www.avaccess.com 15 services@avaccess.
Audio & Video Settings Step 9: Click “Start Recording”. Note: Mute the Audio: in “Audio Mixer” zone, you can click the icon to mute the corresponding audio selected. Such as mute the audio from HDMI IN, click in “Desktop Audio” tab. www.avaccess.com 16 services@avaccess.
Audio & Video Settings Use ZOOM to Capture Video Perform the wiring according to the wiring diagram of “Application” section. And ensure the software “ZOOM” is installed on the PC connected to USB-C port. Launch ZOOM, enter the following interface. Click click “ on the up-right corner or -> Settings” www.avaccess.com 17 services@avaccess.
Audio & Video Settings Step 1: Enter Settings interface. Click “Video” on the left to set. Select “eEver USB Video Device” (the name may be “2-USB Video Device”) on “Camera” tab. www.avaccess.com 18 services@avaccess.
Audio & Video Settings Step 2: Click the check box in front of “Mirror my video” on “My Video” tab to set it to enable. Note: If the selected video is in mirror mode, please set “Mirror my video” to enable. www.avaccess.com 19 services@avaccess.
Audio & Video Settings Step 3: Select “Audio” on the left. And select “Speakers (USB Audio Device)” on “Speaker” tab. Step 4: Select “USB Audio Device” on “Microphone” tab. Step 5: Then exit the Settings page. If you create a new meeting, the video can be captured from HDMI In. www.avaccess.com 20 services@avaccess.
Trouble Shooting Trouble Shooting 1 No Power The device can be powered by the host device connected to USB-C port, and no additional external power supply is needed. Ensure that the connected USB device can supply enough power. 2 No Video The device will be virtually set as a USB camera device in the connected host PC, ensure that you select the correct USB camera in the used software.
Warranty Warranty Products are backed by a limited 1-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable. 1. The original serial number (specified by AV Access Technology Limited) labeled on the product has been removed, erased, replaced, defaced or is illegible. 2. The warranty has expired. 3.
AV Access Technology Limited V1.0.