User's Manual

C210 Integrated Plotter
丨User Manual丨
Please read the manual carefully before using the product and keep it properly.
Warranty Policy
Warranty Declaration
UZIEN products shall calculate the warranty period and the validity period of “Three Guarantees” from the date of invoicing,
during which the faults that occur under normal conditions could be repaired, replaced, and returned according to the
“Three Guarantees” regulations. Within the warranty period (including the validity period of three guarantees), the following
conditions will not enjoy the "three guarantees" service. <Except otherwise agreed:>:
(1)The failure or damage of the product is due to the user in work environment other than that specified by the company
(such as power supply, temperature, humidity, atmospheric pressure, etc.).
（2）The failure or damage of the product is caused by the user's use of non-UZIEN-specific or appointed options, accessories
(such as battery leakage or explosion, etc.).
（3）Failure or damage of the product caused by virus infection during the use of the product.
（4）Product failure and damage caused by users using non-UZIEN-specific genuine consumables.
（5）Failures and damages or the loss of product parts caused by improper storage of the user (such as rodent pests, insect
pests, liquid infiltration, foreign matter entry, etc.).
（6）Failure and damage caused by human factors, or caused by not obeying the operation and precautions written in
accordance with the instructions for use of the product (the product itself, the product package, the product manual/
instructions, and other forms of information).
（7）Failure caused by computer software and hardware connections.
（8）Damage caused by the user's moving and transporting.
（9）Failures and damages caused by the disassembly, repair, modification, etc. of UZIEN products without the written
authorization of UZIEN.
（10）Failure or damage due to force majeure.
（1）The geographic scope covered by the warranty is limited to mainland China, excluding HongKong, Macao and Taiwan
areas.
（2）The user cannot present the valid warranty certificate (original "warranty label" or "invoice" for the warranty card or
warranty manual), or the purchase date and sales unit name (seal valid) filled in the product warranty card or warranty
manual and invoice is incomplete, altered or forged, the product warranty period shall be based on the information
recorded by UZIEN.
（3）
When applying for return or exchange service, the user needs to provide a valid invoice, product warranty certificate
(original warranty card or warranty certificate), original packing box and random accessories for the product when
purchasing.
（4）Consumables (cutter heads, screen protectors etc.) are not covered by the warranty.
（5）The loss, damage, etc. of the random attachments are not provided free of charge by UZIEN;
（6）The user must properly keep the warranty card of the product or the original "including the warranty label" of the
warranty manual, without reissuing any warranty certificate.
（7）The user shall be responsible for the security of the data stored in UZIEN's products and take necessary measures
to protect and back up the data. UZIEN does not assume any direct or indirect responsibility for any user’s loss of data
such as documents or programs or failure of removable storage media.
（8）Do not assume any responsibility for consequential damages and future revenues incurred by the product failure.
Product
List
1
Power
Description
2
Adapter cable Power cable
21 3
Blade Cutter head
Plotter
1.Connect power cable to the adapter, and connect one end of the power
cable to the power socket. To ensure the normal operation of the device,
please use 220V/50 Hz AC power.
2. Connect one end of the adapter cable to the power interface of the plotter.
3.Install the cutter head to the cutter head clamp next to the driver to
ensure it is fixed.
4.After the connection is completed, press the [Power button] to start the
device.
Product
Figure
3
Operating
Instruction
4
3
7
8
2
5
1
4
6
1. Power button: Press to start the machine.
2. Operating display: 5 "LCD capacitor screen.
3. Cutter head: Cut explosion-proof film.
Please refer to 10, 11, 12 and 13 for more details.
4. Cutter head clamp: Lock the knife handle to
fix the cutter head.
5. Power interface: Connect AC power through the power cable.
6.
Driver (cutter holder): Drive the cutter head to move horizontally.
7. Compressive bar: Press to lift the platen to make the screen
protector enter the device.
8. Platen: fixed screen protector.
9. Button: press to replace the blade (Press only when changing the needle).
10. Setting circle: Rotate to adjust the cutting depth of the blade, “+” means
to adjust to the deep, “-” means to adjust to the shallow.
11.Knife handle: Fixed with the cutter head. Before use, please tighten the
cutter head clamp to lock the knife handle.
12. Blade: Used to cut the screen protector. The blade is fragile, please
protect it properly and keep it from hard objects.
1.Installation of cutting tool
(1) Loosen the screw
(2) Put the cutter head perpendicularly into the cutter head clamp,
lock to the groove of the knife handle.
(3)Tighten the screw of the cutter head clamp to fix the cutting tool.
3
21
9
10
11
12
2. Power on
（1） Remove the nylon cable on both sides of which is used to protect the drive.
（2） Remove the foam protector on the cutter head clamp, and install the cutting tool
(Please refer to Installation of cutting tool for details).
（3） Press [power button] and wait the machine to start.
Note: Please do not move the drive after starting the device to avoid error reporting.
3.System
1. After the system starts normally, connect WIFI and it shows the interface as below.
2. Enter the code on the package of the flexible explosion-proof film, click [confirm] to
finish addition.
3. Click [product] to see all categories of the protector, click [Screen protector], and then
choose brands and models.
4.Plot
1. Prepare a screen protector to be plot. Confirm that the screen protector is flat and the
film layer is complete without bending, folding or scarce.
2. Press the compressive bar to raise the platen, and put screen protector along the paper
guide slot.
3. Align the screen protector with the arrow line, lift the compressive bar lightly up to assure
platen compress the screen protector.
(2) Take out the flexible explosion-proof film and remove the hole diaphragm.
(3) Put the film flatwise and align with the phone screen and holes, move the film to make
adjustment.After aligning, press the middle auxiliary strip to stick the screen.
(4) Open the inner release film, lift the film up slightly and fold it back, and push it forward
with force, then lift the another half of the release film and push it forward with the scratch
card.
(5) Uncover the PET protector on the surface and finish pasting.
2.Please visit the website of UZIEN (http://www.uzien.com) for [Technical Support] --
[Operation Guide] to watch the teaching video of how to paste screen protector.
Notice
Warning
1. Please ensure that the power supply voltage meets the rated voltage of this product and it is stable
and uninterrupted.
2. Please ensure that the computer network is smooth.
3. Do not force or push the driver by hand.
4. Do not use this equipment to cut the materials provided by Non-UZIEN.
5. Please ensure that the device is placed in a stable, non-swaying place before starting the device.
6. Please use the original box and packing materials, or a similar box of the appropriate size for storage
or transportation.
At the same time, be sure to remove the cutter head and keep it in a safe place. Do not invert, crush
and collide during storage or transportation.
1. When operating, please ensure that your hands are dry.
2. The device can only be operated or stored in a dry, cool environment.
3. Please keep your limbs, hair, clothing, jewelry, etc. away from the equipment when the equipment
is in operation.
4. Please keep infants and pets away from the equipment when the equipment is in operation.
5. The tip of the knife is sharp. In order to avoid accidents such as ingestion and skin damage, please
keep out of reach of infants and young children.
The place.
6. Please properly handle the packaging bag of this product. In order to avoid accidents such as
suffocation of infants and young children, please keep out of reach of infants and young children.
www.uzien.com
Teaching video of how
to paste screen protector.
Maximum feed width
Maximum cutting width
Feed slot width
Cutting precision
Repeat accuracy
Cutting speed
Cutting pressure
Control panel
Network access
Input
Output
Power
Service temperature
Dimension
Net weight
Dimension(with package)
< 100W
24V/2.75A DC
5-inch color LCD capacitive screen
802.11n Wireless LAN
100-240V/ 2A/ 50-60Hz
350g
30mm/s
0.1mm
0.1mm
220mm
200mm
220mm
670×310×265mm
6.5kg
530×200×170mm
＋5℃-＋35℃
Model No. C210
Specification
Question State Reason Solution Question State Reason Solution Question State Reason Solution
The network is unstable and the
data transmission is interrupted
during the cutting process.
Please reconnect
to the network
Lift the compressive
bar up
1. Press the power
button for 3 seconds
to turn off the
machine.
2.Move the cutter
holder (red box part)
to the middle position
of the machine at a
uniform speed.
3.Reboot the plotter
and wait for the cutter
holder to reset.
1.The original position detection
of the sensor has an error.
2.The cutter holder was shifted
at booting time, which leads to
the plotter to report an error
while cutting.
3.Repeat clicking on the "Plot",
resulting in repeated operation
commands.
4.
When the above five phenomena
appear, please solve with the
following methods.
The compressive bar is not lifted,
the cutting was not complete and
the cutting command was not
finished, thus the machine gives
an error when cutting the next
model.
What if there
is red light or
gives an error
and has an
alarm sound
during the
cutting
process?
Breakdown Maintenance
There is foreign objects at
the tip of the blade.
Turn off the plotter,
take off the cutter
head and check if
there is foreign
objects at the tip
of the blade and
remove it.
Take off the blade
and re-install it, and
adjust the scale of t
he knife to 0.5 more
gear backward, and
re-cut.
The blade is broken
or seriously worn,
just replace it.
You could contact the
corresponding sales
first. We will update
preferentially, usually
within 48 hours.
The blade is broken or
seriously worn.
Not enough blade depth.
What if the
edge of the
cutted film
has sawtooth?
What if the
plotter does't
support to
plot certain
phone model?
No data found. Model is under updating
The film is not pushed to the
bottom or not put in along
the paper guide slot and stuck
outside.
Lift the compressive
bar up, take out the
film and put the film
along the paper
guide slot and
align with the
arrow line.
Lift the compressive
bar up
1.Turn off the device
and take down the
cutter head, check
whether the scale
is adjust to standard
scale 2.
2.Replace the cutting
tool on the cutter
holder and tighten
the screw. Run a
blade test.
The cutter head is installed
incorrectly
The scale of the cutter is
too deep, which leads to
the film warp and plot
incomplete.
3.Turn on the device
and reduce the scale,
and then run a blade
test.
The compressive bar is not
lifted that leads to the platen
not fix the film.
After putting
the film into
the machine,
what is the
reason for
the incomplete
or abnormal
cutting?
1922102
The sketch map used in this user manual is for reference only and the actual product in the
package shall prevail.
This product information is subject to the website of UZIEN (http://www.uzien.com) and is
subject to change without notice.
The descriptions and images involved are subject to the actual contents of the box, and to
the extent permitted by Chinese laws and regulations, Shenzhen UZIEN Technology Co., Ltd.
reserves the right to interpret. The user manual and related product materials are subject to
the Chinese content for products sold in mainland China, while English and other language
content for global sales are for contrast only.
This manual is for reference only. Except for the current laws and regulations in China, Shenzhen
UZIEN Technology Co., Ltd. does not undertake any liability for direct or indirect damages
resulting from the use of this manual.
Additional information could refer to other forms of material including but not limited to the
product itself, product package and UZIEN website (http://www.uzien.com).
UZIEN user manual or web pages may describe hardware/software products，functions and
services of other companies (non-UZIEN), for which UZIEN does not make any indications and/
or implied warranty for any products and services provided by other companies, including but
not limited to its content, performance, accuracy, compatibility, reliability, legality,
appropriateness and continuity.
For users in mainland China:
If you have any questions during use, you could ask for help in the following order:
1. You could consult the relevant instructions, including the user manual etc.to solve the problem;
2.Visit the UZIEN website (http://www.uzien.com) and check the relevant information to solve
the problem;
3. Call the UZIEN customer service hotline, our professional engineers will guide you to solve
the problem.
C210 Integrated Plotter User Manual
Official website:www.uzien.com
Customer Service Hotline:[phone]
400-618-2227
4. Select the model to be plot, click [plot] and confirm it to start plotting.
5.After plotting, the screen protector will be pull out, take out the screen protector and
finish plotting.
Paste
the film
5
1.How to paste
(1) Clean the phone screen surface
尺寸：148.5*210mm
材质：书纸 骑马钉
Thank you for purchasing UZIEN products. Please keep this warranty card and the National Taxation Bureau's standard sales certificate issued by the dealer when purchasing. You will be required to show the above certificate as the warranty basis when repair.
The following columns require the sales UNIT to assist the user in completing the entry, with the * number being mandatory.
Contact number*： Fax：
Postal code* ：
User name*： User address* ： Email*
：
Sales Unit Name*： Address*： Contact*： Phone*： Postal code * ：
(Seal valid)
UZIEN Product Warranty Card
Product ： Item No.：
Integrated Plotter
Model No： Product Origin：
C210
China
Sales Date*： Day/Month/Year Invoice number*： Installation Date* ：
Day/Month/Year
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc
tions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged t
o
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may
cause undesired operation.