High Definition AD Players Universal User’s Manual L Series and PF Series
High Definition AD Player User’s Manual Cautions 1. Do not install and use the unit in moisture, high temperature, outdoor, and closed environment. 2. Please turn off the power supply before cleaning the unit. Spary cleaning solution on rag to wipe down unit. Do Not spray cleaning solution directly on to unit. 3. Do not block air vent and other holes, do not install the unit beside near any heat source, and other devices which may affect the ventalation. 4.
High Definition AD Player User’s Manual Contents: Packing list ........................................................................................................................................ 4 1. Product Introduction...................................................................................................................... 5 2. Remote Control ............................................................................................................................. 7 3. System Setting .
High Definition AD Player User’s Manual Packing list In the carton, you will find the following: LCD display Remote controller Wall plate (on all PF series below 42”) Power cable Key CD Allen Key (for L Series display only, to remove handles) 4
High Definition AD Player User’s Manual 1. Product Introduction 1.1 Overview: High definition LCD display, support pictures, video, text, time & date, 1080P HD media files. ADPE software can provide multi zone function for both horizontal and vertical mode; customized templates are available for users with different requirements. 1.
High Definition AD Player User’s Manual 1.5. Wall Mounting Plate for PF Series 1.
High Definition AD Player User’s Manual 2.
High Definition AD Player User’s Manual Replace remote control battery 1. Open the battery cover 2. Take out the battery box in the right direction as the following picture shows 3. Remove the used battery 4. Insert the new battery in the right way 5. Put back the cover In order to enter the setup menu you must first press the “stop” button on the remote to go back a screen as picture below. Then press the “setup” button on the remote.
High Definition AD Player User’s Manual The location of the IR remote receiver on both the PF & L Series as pictured below.
High Definition AD Player User’s Manual 3. System Setting Main menu pictured below. TIPS: By pressing the PLAY / PAUSE button on the Remote Control, you can go into the sub-menu or confirm the item you choose, use the arrow navigation buttons to choose the item you want. 3.1 System Settings Under system settings you can set the OSD Language, Clock Display, Scrolling Text, USB Port, Restore to Factory Settings, and Return to Main Menu.
High Definition AD Player User’s Manual OSD Language The OSD supports four languages – Simplified Chinese, English, French, and Japanese, are available now more languages will be supported in the future. Clock Display There are 4 options as pictured below : Top Left: The time will be displayed on top left of the screen. Bottom Left: The time will be displayed on bottom left of the screen. Top Right: The time will be displayed on top right of the screen. Off: The screen doesn’t display time.
High Definition AD Player User’s Manual Scrolling Text There are 2 options as pictured below; the default setting is “On”. Off: The screen doesn’t display scrolling text. On: The screen will display scrolling text from the txt file in the playlist, if there is no playlist or there is no txt file in the playlist the screen doesn’t display scrolling text. USB Port There are 2 options as pictured below, the default setting is “On”. On: The product can support the USB device.
High Definition AD Player User’s Manual Restore To Factory Settings After factory settings are restored all system settings will default back to their original settings 3.2 Playback Control Storage Priority This is used to set the LCD display to read media files from Internal Storage or USB Disk.
High Definition AD Player User’s Manual Playback Mode There are three options as pictured below: Free: The user copies thier media files on to the USB stick and the LCD display will read directly from it. Encrypted: The user makes the playlist with encryption by using the ADPlaylistEditor3 software; the LCD display will read the media files after verifying the password.
High Definition AD Player User’s Manual Play Time This is used to set the play time for pictures under the Free Playback Mode and is not valid for video files. 3.3 Date & Time Procedure is listed below: 1. Choose Date & Time in the Main Menu, and press PLAY/PAUSE to go into the sub-menu. 2. Press Left or Right Navigation buttons to choose the item you want to modified. 3. Press Up or Down Navigation buttons to change the number. 4. Choose Update Date & Time to save your settings.
High Definition AD Player User’s Manual 3.4 On / Off Timer There are 2 Timer Modes to choose from pictured below. Weekly User can set the on/off timer weekly. For example, on Sunday, 6:00am on, 11:00am off: 1. Choose Weekly in the On/Off Timer menu, press PLAY/PAUSE to confirm, see below. 2. Choose Timer on/off in the Control Mode, then the three Timer items are valid, Choose the Status of Timer(1) to be ON, then make the On Time to be 06:00, Off Time to be 11:00. 3.
High Definition AD Player User’s Manual Daily User can set the on/off timer daily. Choose Daily in the On/Off Timer menu, press PLAY/PAUSE to confirm, see below. There are 3 items for option: A. Timer On/Off: user can set 3 groups Timer, each group can set “On” or “Off”. B. Keep On: after connecting the power cable, the product will keep power on. C. Keep Off: after connecting the power cable or turn on the unit by remote control, the product will power off automatically one minute later. 3.
High Definition AD Player User’s Manual 3.6 Screen Mode Set the screen to horizontal or vertical display for landscape or portrait use. 3.7 File Management Here user can check the storage and Format the disk. Format Disk will erase all data, please be cautious. 3.7 Exit The system will exit the main menu.
High Definition AD Player User’s Manual 4. Input Port Setting Press MUTE button of the remote control, below menu will pop up, this is used to choose the input signal and other system setting. 4.1 Source There are HDMI, VGA, and Digital Signage to choose from.
High Definition AD Player User’s Manual 4.2 System Setting OSD Language: Simplified Chinese and English Reset: Reset will restore the system to what’s listed below: Language: English Source: Digital Signage Brightness: 50 Contrast: 50 Saturation: 50 4.3 Image Here user can set the Brightness, Contrast, and Saturation.
High Definition AD Player User’s Manual 5. ADPlaylistEditor Introduction ADPlaylistEditor (here after called ADPE) is a fantastic solution for digital signage, it is an innovation that entertains while maximizing the impact of your message. Create your own signage content by using your PC and the free ADPE software. Transfer that content by using a USB stick and plug it into the LCD display to run the content, no additional hardware is needed. 5.1 Installation Install Microsoft .Net Framework 3.
High Definition AD Player User’s Manual Install FinalCode.exe FinalCode is used to decode the media files when you use the preview function in the ADPE software, it is suggested you install otherwise the preview function may not work well. Double click on the installer "FinalCode.
High Definition AD Player User’s Manual Install ADPlaylistEditor Double click on the installer "setup.exe" and follow the on-screen instructions.
High Definition AD Player User’s Manual Run the software User may need to install another software if below Error pops up when you run ADPE. Double click vcredist_x86.exe in the accessory CD-ROM which is a system patch. Interface 1. Menu Bar: Provide access to all the features of this software. 2. Media Library: Helps the user locate media files on thier computer and gives previews in the bottom box.
High Definition AD Player User’s Manual New - create a new program. Open - open a program file already exists. Close - closes all the current files and clears the work space. Save/Save As - save your current work with the name as *.gpl. Options – allow user to setup a playback duration and transition style for all the images. Player Settings – allows the user to change the settings on their screens. Preview - preview the current file.
High Definition AD Player User’s Manual Selecting the checkboxes Date and Time allows the user to setup the playback duration. It also allows user to change the screen mode. TIPS 1: There are three Screen modes for option as example under 16:9: VID which can display videos or pictures only, VID+PIC+BOT which can display videos on left, pictures on right and scrolling text at bottom, PIC+VID+BOT which can display pictures on left, videos on right and scrolling text at bottom.
High Definition AD Player User’s Manual Click the relevant tab title to edit content for the zone: VID - video zone, PIC - image zone, BOT - bottom zone Add - Adds a media file to the current zone. Edit - Allows user to edit a media file in the playlist. Delete - Removes a media file from the playlist. Up/Down - Allows user to adjust the playback sequence of listed items. For example, in VID tab, click Add to get PlayList Item Editor.
High Definition AD Player User’s Manual The Duration and Transition Style portions will only be available when an image is selected as the media file. Duration: Sets the period that the image will be played. User can define the playback duration for each image by entering a figure in the time box or dragging the time bar. The supported maximum duration is 2 hours. Transition Style: The transition effect is used to introduce the next image. User can define the transition style for each image.
High Definition AD Player User’s Manual The scrolling text will be displayed at the bottom of the screen in full-screen mode, or in BOT zones in split-screen modes. Now the user can preview and save the finished playlist. 5.3 Player Settings The Player Settings button on the tool bar allows user to make settings on the player. These settings can be imported to the player via the feature Save to USB.
High Definition AD Player User’s Manual 5.4 Save to USB The function Save to USB allows user to save the finished playlist to a USB disk for input into the LCD display. Click Save to USB in the Tool bar or click Tools -> Save to USB. Select the player type, X86 or SW110. SW110 is for standalone type LCD display. Insert a USB disk, and then select the disk you wish to save to. Choose whether to encrypt the playlist. This step is not necessary. Select the checkbox Encrypt to enable this function.
High Definition AD Player User’s Manual 6. Content Update 6.1 Update content directly If user doesn’t want to use ADPE to make their playlist, They can copy their media files on to a USB stick and plug it into the USB port of the LCD display. If the Storage Priority in the Playback Control Menu is set to USB Disk, then the LCD display will playback the media files directly.
High Definition AD Player User’s Manual 7. Screen Template Dimensions These are the sizes need to set-up your files to proportionally fit the zones. 7.1 Horizontal (Landscape) dimension 7.